AIKO vs EGing PV - solar panel manufacturer comparison
AIKO has the broader catalog (144 vs 131 models). AIKO leads on peak efficiency at 25.20%. EGing PV leans bifacial (39% of lineup).
Both catalogues are read from the manufacturers' own datasheets. A brand is not scored against the market here, only against the other brand on this page.
The two companies
- Founded
- 2009
- Headquarters
- Shanghai, China
- Listed
- SZSE: 600732
- Tier 1 bankable
- Yes
- Founded
- 2003
- Headquarters
- Changzhou, China
- Listed
- SZSE: 600537
- Tier 1 bankable
- Yes
Catalogue against catalogue
An average over a catalogue describes the range a manufacturer publishes, not the module you would buy. A brand with two flagship panels and eighty older ones averages worse than one that has retired its back catalogue.
What each of them builds
AIKO skews to higher efficiency: 85% of lineup is 23%+
AIKO offers more 600W+ panels (60% of lineup)
Dominant cell tech: <strong>Back Contact</strong> (83%)
Dominant cell tech: <strong>PERC</strong> (76%)
The flagships
Written summary
AIKO is a Chinese solar manufacturer that entered commercial production relatively recently but has scaled aggressively, achieving BloombergNEF Tier 1 bankability status in Q3 2024 and reporting a nameplate production capacity of approximately 20 GW per year as of early 2025, with further expansion underway. EGing PV is also a Chinese manufacturer, founded in 2003 in Changzhou, and likewise holds Bloomberg Tier 1 status. EGing operates at a considerably smaller scale - with its single manufacturing facility reported to produce around 2 GW per year - and carries a lower profile in international markets, particularly in Western regions where it maintains a limited local support footprint. On institutional presence and production scale, AIKO has a clear advantage.
AIKO has built its identity around proprietary All Back Contact (ABC) N-type cell technology, which places all electrical contacts on the rear surface of the cell to maximize light capture. Its residential Neostar series delivers module efficiencies confirmed above 24%, while its larger-format Comet modules, targeting commercial and industrial rooftops, reach above 23.9%. This positions AIKO in the premium segment, competing against HJT rather than mainstream TOPCon. EGing PV takes a more conventional route, offering N-type TOPCon modules - including the bifacial Star Pro series - with efficiencies in the 22.3 to 22.45% range. Its product mix suits cost-sensitive commercial rooftop and small utility applications where bankability matters but maximum efficiency is not the primary criterion.
For a buyer in 2025, AIKO is the stronger choice when peak efficiency, low degradation, and a strong 30-year warranty justify a premium price - particularly for space-constrained residential rooftops. EGing PV is a reasonable alternative in markets where it has active distributor support and where standard TOPCon performance at a competitive price point is sufficient. The gap in brand recognition and global installed base is large enough that most buyers outside established EGing markets would default to AIKO or other more widely stocked options.
Generated by Claude Sonnet · 2026-06-21
Other brand comparisons
Shop prices: See 179 AIKO offers · See 3 EGing PV offers
Comparisons are computed from manufacturer datasheets held in the ComparePV database and may not reflect a brand's complete current lineup. Nothing on this page is paid placement.