Strong in heat, no clear weak spot
Jolywood JW Plus series is designed to maximize yield in real-world conditions - where performance isn’t measured just by wattage on the label, but also by stable operation year after year. These are bifacial modules based on n-type TOPCon cells, which handle typical operational challenges better: reduced power output under lower irradiance, losses in high temperatures, and performance degradation over time. Dual-sided light absorption helps utilize reflected light from the ground surface, which is particularly beneficial on light-coloured roofs, rooftop structures, and anywhere where surface reflectivity can be controlled.
The approach to longevity is also noteworthy - the series prioritizes low degradation and resistance to phenomena like LID, while the construction supports high reliability over a long operational lifespan. JW Plus is an outstanding choice for commercial and industrial installations, utility-scale solar farms, and demanding rooftop applications, where yield, predictability, and project profitability are key.
Ranking
Signals from the data
Commercial, utility-scale, shaded-installations and hot-climate.
Top 7% of the TOPCon 600-650 W segment, against a median of -0.290. Ranked 1,409th in the whole database.
Top 14% of the TOPCon 600-650 W segment, against a median of 53.1.
N-type TOPCon cells deliver a temperature coefficient of Pmax of -0.28%/°C versus -0.35 to -0.45%/°C for standard PERC modules. This translates into measurably higher energy yield during summer heat and eliminates the LID degradation issue inherent to p-type technology.
Jolywood guarantees no more than 1% power loss in year 1 and ≤0.4%/year thereafter, maintaining a minimum of 87.4% of rated power at year 30. The 30-year warranty horizon places JW Plus in the premium tier for LCOE predictability over the full project lifecycle.
JW Plus modules achieve ~80% bifaciality, delivering a real-world energy gain of 5-15% over monofacial equivalents in ground-mounted applications with albedo of 0.25-0.5 (e.g., white roofing membranes, light-colored gravel). Most beneficial for utility-scale and C&I ground-mount systems.
Jolywood maintains BNEF Tier-1 Bankable Manufacturer status as of Q1 2026, evidencing module supply to ≥6 projects above 10 MW financed by independent commercial banks. Publicly listed since 2014 with a market cap of ~USD 1.68 billion and total assets of ~USD 2.6 billion, significantly reducing warranty counterparty risk.
Jolywood earned Top Performer status in the Kiwa PVEL PV Module Reliability Scorecard for the third consecutive year (2022-2024), covering thermal cycling, damp heat, PID resistance, and mechanical load tests. This independent third-party validation goes beyond manufacturer datasheets.
Despite having a Polish distributor (Energia Pomorze) and a LinkedIn-listed Jolywood Europe showcase, the after-sales and warranty service network in Central Europe remains significantly smaller than those of LONGi or JA Solar, which operate regional technical support hubs. For large C&I or utility installations (>1 MWp), this may translate into longer warranty claim resolution times.
JW Plus launched in 2024, meaning there is no multi-season field performance record from Central European continental climate installations. The stated 0.4%/year degradation rate is backed by PVEL lab testing, not real-world data spanning full winter-summer cycles in the target market.
- Efficiency of 23.0% matches the TOPCon 600-650W median
- Power density of 229.5 W/m² matches the TOPCon 600-650W median
- At -0.28%/°C, hot weather performance is typical for TOPCon 600-650W panels
- Weight of 29.7 kg (3.1 kg below TOPCon 600-650W median of 32.8 kg) allows easier transport and roof mounting
- Bifacial design (80% factor) captures reflected light - adds 4-12% yield on ground-mount or white roof
Specifications
Datasheet charts
Measured curves published by Jolywood in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 620 Wp appear here. The rest cover the whole series.
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.
Found 1161 panels of the same or similar size to this one, within ±10 mm. See them here Found 1167 panels of the same or similar size to this one, within ±25 mm. See them here Found 1278 panels of the same or similar size to this one, within ±50 mm. See them here Found 1970 panels of the same or similar size to this one, within ±100 mm. See them here
About the JW Plus Series series
These answers cover the whole series. Where a figure differs, the specification above is this module's own.