Skip to main content

Vikram Solar HYPERSOL VSMDH.66.620.05

620 Wp N-type Bifacial 80%
ComparePV verdict

Strong in heat, no clear weak spot

Rank 2,675 of 14,354
Compare panels Datasheet PDF
Power (Wp)
620
Typical for its class
Efficiency (%)
22.95
Typical · median 22.77%
Density (Wp/m²)
229.5
Typical · median 227.7
Temp (%/°C)
-0.280
Strong · top 14%
Weight (kg)
33.4
Typical · median 32.8 kg
Warranty (yrs)
30
Typical · median 30 yrs

The Vikram Solar HYPERSOL VSMDH.66.AAA.05 series consists of bifacial glass-glass solar modules built for installers and investors who want the highest possible yield from every square meter of roof or ground space. Thanks to half-cut N-type G12 cells, these panels reduce current-mismatch losses across the string, resulting in more stable performance for the entire array. What sets this series apart is its bifaciality of up to 80 percent, allowing it to capture additional energy reflected from the ground, which is especially valuable in ground-mount installations and light-colored surfaces. The manufacturer also implemented a zero negative power tolerance, so the actual output of installed panels never falls below the stated nominal value. A design resistant to PID, LID, and LeTID degradation ensures better durability under demanding operating conditions, while an independently verified hail test confirms the strong mechanical resistance of the front glass. Backed by a 30-year linear power warranty, this series is an attractive choice for both commercial rooftop projects and large utility-scale solar farms, where a low LCOE and predictable long-term performance matter most.

Ranking

378 panels in the segment N-type 600-650 W
Metric This panel Median Position in segment Overall rank
Module efficiency 22.95% 22.77% Typical 2,408
Power density 229.5 227.7 Typical 2,331
Temperature coefficient -0.280 -0.290 Strong · top 14% 1,409
Weight per kWp 53.9 52.8 Typical 8,199
Performance warranty 30 yrs 30 yrs Typical 31
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

1 positive · 0 caution
Best for

Utility-scale, commercial and agrivoltaic.

Strengths
-0.280 %/°C temperature coefficient

Top 14% of the N-type 600-650 W segment, against a median of -0.290.

Notes from the database
  • Efficiency of 22.9% matches the N-type 600-650W median
  • At 229.5 W/m² power density, roof space requirements are typical for N-type 600-650W panels
  • Temperature coefficient of -0.28%/°C matches the N-type 600-650W median
  • 80% bifaciality enables rear-side power generation, boosting yield by 4-12% on reflective surfaces
  • In the top 17% for efficiency among all N-type panels

Specifications

Open datasheet PDF
Nominal power (Pmax) 620 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 22.95 % Typical Segment median 22.77%
Vmpp · Impp 41.20 V · 15.05 A Operating point at max power
Voc · Isc 49.10 V · 15.95 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 2382×1134×30 mm · 2.70 m² of roof
Weight 33.4 kg Typical Typical · median 32.8 kg
Cells 132 · N-type Monocrystalline
Bifaciality 80 % Rear output as a share of front
Coefficient Pmax -0.280 %/°C Strong top 14% of its segment
Coefficient Voc · Isc -0.250 · 0.045 %/°C
NOCT 45 °C At 800 W/m², 20 °C ambient
Product warranty 12 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 87.4 % Equals 542 W guaranteed
Degradation 1.00 → 0.40 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by Vikram Solar in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 620 Wp appear here. The rest cover the whole series.

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.280 %/°C against a segment median of -0.290
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Filter these
Size
Panel Power Eff. Temp. Weight Difference
Vikram Solar HYPERSOL VSMDH.66.620.05 620 W 22.95% -0.280 33.4 kg You are here
AIKO-A650-MAE72Mw 650 W 25.20% -0.260 27.0 kg +30 W, lighter, +2.2 pp
AIKO-A645-MAE72Mw 645 W 25.00% -0.260 27.0 kg +25 W, lighter, +2.1 pp
AIKO-G670-MCH72Mw 670 W 24.80% -0.260 28.2 kg +50 W, lighter, +1.9 pp
LR7-72HVHF-670M 670 W 24.80% -0.260 28.5 kg +50 W, lighter, +1.9 pp
AIKO-A640-MAE72Mw 640 W 24.80% -0.260 27.0 kg Cooler, lighter, +1.9 pp
JKM650-670N-66QL6-BDV (670W class) 670 W 24.80% -0.260 32.5 kg +50 W, cooler, +1.9 pp
HYPERSOL VSMDH.66.610.05 610 W 22.58% -0.280 32.1 kg -10 W, lighter, -0.4 pp
HYPERSOL VSMDH.66.615.05 615 W 22.77% -0.290 32.1 kg Lighter
HYPERSOL VSMDH.66.625.05 625 W 23.14% -0.280 33.4 kg Very close match
HYPERSOL VSMDH.66.630.05 630 W 23.32% -0.280 33.4 kg +10 W, +0.4 pp
HYPERSOL VSMDH.66.635.05 635 W 23.51% -0.280 33.4 kg +15 W, +0.6 pp
HYPERSOL VSMDH.66.640.05 640 W 23.69% -0.280 33.4 kg +20 W, +0.7 pp
ENERSURGE VSMDH.66.645.05 645 W 23.88% -0.260 33.4 kg +25 W, cooler, +0.9 pp
ENERSURGE VSMDH.66.650.05 650 W 24.06% -0.260 33.4 kg +30 W, cooler, +1.1 pp
AIKO-A680-MDE72Mw 680 W 25.20% -0.260 29.0 kg +60 W, lighter, +2.2 pp
AIKO-A675-MDE72Mw 675 W 25.00% -0.260 29.0 kg +55 W, lighter, +2.1 pp

Found 1161 panels of the same or similar size to this one, within ±10 mm. See them here Found 1167 panels of the same or similar size to this one, within ±25 mm. See them here Found 1278 panels of the same or similar size to this one, within ±50 mm. See them here Found 1970 panels of the same or similar size to this one, within ±100 mm. See them here

About the HYPERSOL VSMDH.66.AAA.05 series

6 answered

These answers cover the whole series. Where a figure differs, the specification above is this module's own.

What is the warranty on Vikram Solar HYPERSOL VSMDH.66.AAA.05 modules?
The series comes with a standard 12-year product warranty and a 30-year linear power warranty, guaranteeing high energy output even after three decades of operation. This is one of the longer warranty periods on the market, making the model an attractive choice for commercial installations and PV farms where predictable long-term ROI matters.
What benefit does the up to 80% bifaciality of the HYPERSOL VSMDH.66.AAA.05 panels provide?
Thanks to the glass-glass construction and a bifaciality factor of up to 80%, the rear side of the module captures additional light reflected from the ground, roof, or surroundings. In ground-mount installations, on light gravel, white roofs, or agri-PV farms, this can boost energy yield by several percent compared to monofacial panels, without increasing the installed footprint.
How do N-type half-cut G12 cells differ from classic PERC cells?
N-type cells have lower light-induced degradation (LID) and light- and elevated temperature-induced degradation (LeTID), plus higher efficiency than older P-type PERC cells. The half-cut format in the G12 size splits each cell in half, reducing current losses and internal resistance, improving module performance under partial shading, and boosting total panel power up to 720 Wp.
Are the HYPERSOL VSMDH.66.AAA.05 panels suitable for large solar farms?
Yes, the high unit power of 720 Wp combined with bifaciality and resistance to PID, LID, and LeTID make this series designed for large ground-mount and commercial installations where a low levelized cost of energy (LCOE) per watt matters. Fewer modules are needed to reach a given capacity, lowering mounting structure, cabling, and installation labor costs.
What does zero negative power tolerance mean for these panels?
Zero negative power tolerance means the actual output of every manufactured panel is never lower than the value stated on the label - it can only be equal to or slightly higher. For investors, this guarantees that the purchased system capacity will be fully delivered, removing the risk of underestimated energy production from day one.
Is Vikram Solar a proven manufacturer, and where are HYPERSOL panels made?
Vikram Solar is an Indian PV module manufacturer with Tier 1 classification, confirming its financial stability and production track record as recognized by market analysts such as BloombergNEF. HYPERSOL VSMDH.66.AAA.05 panels are manufactured in India, and their PID-, LID-, and LeTID-resistant construction along with a passed independent hail impact test confirm solid build quality.
Add to compare