Skip to main content

QN-660HJT-01

660 Wp N-type Bifacial 80%
ComparePV verdict

Strong in heat, no clear weak spot

Rank 1,142 of 14,005
Compare panels Datasheet PDF
Power (Wp)
660
Typical for its class
Efficiency (%)
23.30
Typical · median 23.30%
Density (Wp/m²)
233.2
Typical · median 233.2
Temp (%/°C)
-0.240
Strong · top 2%
Weight (kg)
35.5
Typical · median 33.5 kg
Warranty (yrs)
30
Typical · median 30 yrs

The Q-SUN Solar Qrystal Max N12 (N-type) 640-670W series is designed for maximum energy yield on limited space - where every square meter counts. The use of N-type cells helps minimize typical power losses over time and maintain the stable operation of the system for many years, which realistically improves the return on investment. The modules utilize bifacial technology, allowing them to also generate power from reflected light, which is particularly beneficial on bright roofs, membranes, and ground-mounted structures.

The TOPCon architecture is also noteworthy, as it supports high efficiency under variable solar conditions - which is important given the typical Polish weather, frequent cloud cover, and morning or afternoon shadows. The series is a good choice for PV farms, large industrial rooftops, and commercial projects, where a high yield and predictable production are the priority. It distinguishes itself from the competition through the combination of N-type, bifacial, and TOPCon technology in the high-power segment, which is focused on achieving a better energy balance throughout the entire lifespan of the system.

Ranking

109 panels in the segment N-type 650-700 W
Metric This panel Median Position in segment Overall rank
Module efficiency 23.30% 23.30% Typical 1,017
Power density 233.2 233.2 Typical 1,089
Temperature coefficient -0.240 -0.290 Strong · top 2% 13
Weight per kWp 53.8 50.9 Typical 7,860
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

6 positive · 2 caution
Best for

Commercial and utility-scale.

Strengths
-0.240 %/°C temperature coefficient

Top 2% of the N-type 650-700 W segment, against a median of -0.290. Ranked 13th in the whole database.

What owners get
Efficiency well above peer comparables

Module efficiency of 22.6–23.7% clearly exceeds comparable series at the same 670 Wp power class - Hiwatt HW-M12/132H (21.6%), Techwise Summit Series (21.57%) and Resun RS9H-M (21.57%). The 1-2 percentage-point gap translates into a meaningfully smaller roof area needed for the same installed capacity.

N-type cells with lower degradation

N-type technology limits the LID/LeTID losses typical of PERC and performs better at high temperatures, delivering a more predictable annual yield in Poland's climate, which includes significant summer heat and partial shading periods.

Bifacial modules boosting yield

The dual-sided design captures additional reflected light, which is especially beneficial on bright industrial roofs, EPDM/PVC membranes, and elevated-mount ground installations.

30-year power warranty

The manufacturer offers a 30-year power warranty - 5 years longer than the standard 25-year terms typical of most comparable P-type/PERC series in the 640-670W segment, improving the long-term LCOE balance.

TOPCon architecture for variable irradiance

The TOPCon architecture supports more stable performance under diffuse and variable irradiance, which matters in Poland given the high share of overcast days and frequent morning/afternoon shading.

Trade-offs
Production discontinued in 2024

The series launched in 2023 and was discontinued in 2024 - secondary-market availability is limited, and warranty servicing over the stated 15/30-year coverage period may be more difficult to secure.

Manufacturer not on the BNEF Tier 1 list

Q-SUN Solar (founded 2014) does not appear on BloombergNEF's bankable Tier 1 manufacturer list, unlike some competing brands in the high-power segment - this can complicate bank financing for commercial projects and PV farms where Tier 1 status is often a lender requirement.

Notes from the database
  • Efficiency of 23.3% matches the N-type 650-700W median
  • At 233.2 W/m² power density, roof space requirements are typical for N-type 650-700W panels
  • Temperature coefficient of -0.24%/°C vs median -0.29%/°C means ~2% less power loss at 65°C
  • At 35.5 kg (2.0 kg above N-type 650-700W median of 33.5 kg), requires checking roof load capacity
  • 80% bifaciality enables rear-side power generation, boosting yield by 4-12% on reflective surfaces

Specifications

Open datasheet PDF
Nominal power (Pmax) 660 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 23.30 % Typical Segment median 23.30%
Vmpp · Impp 39.15 V · 16.85 A Operating point at max power
Voc · Isc 46.36 V · 17.75 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 2172×1303×35 mm · 2.83 m² of roof
Weight 35.5 kg Typical Typical · median 33.5 kg
Cells 120 · N-type Monocrystalline
Bifaciality 80 % Rear output as a share of front
Coefficient Pmax -0.240 %/°C Strong top 2% of its segment
Coefficient Voc · Isc -0.240 · 0.040 %/°C
NOCT 43 °C At 800 W/m², 20 °C ambient
Product warranty 15 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 90.3 % Equals 577 W guaranteed
Degradation 1.00 → 0.40 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by Q-SUN Solar in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 660 Wp appear here. The rest cover the whole series.

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.240 %/°C against a segment median of -0.290
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Alternatives

All Q-SUN Solar panels
Filter these
Size
Panel Power Eff. Temp. Weight Difference
Q-SUN Solar QN-660HJT-01 660 W 23.30% -0.240 35.5 kg You are here
AIKO-A650-MAE72Mw 650 W 25.20% -0.260 27.0 kg Hotter, lighter, +1.9 pp
AIKO-A680-MDE72Mw 680 W 25.20% -0.260 29.0 kg Hotter, lighter, +1.9 pp
AIKO-A675-MDE72Mw 675 W 25.00% -0.260 29.0 kg Hotter, lighter, +1.7 pp
AIKO-A645-MAE72Mw 645 W 25.00% -0.260 27.0 kg Hotter, lighter, +1.7 pp
AIKO-A700-MAE78Dw 700 W 25.00% -0.260 34.5 kg +40 W, hotter, +1.7 pp
AIKO-A695-MAE78Dw 695 W 24.90% -0.260 34.5 kg +35 W, hotter, +1.6 pp
AIKO-G670-MCH72Mw 670 W 24.80% -0.260 28.2 kg Hotter, lighter, +1.5 pp
QNM210-HG590-60 590 W 20.80% -0.350 34.8 kg -70 W, hotter, -2.5 pp
QNM210-HG595-60 595 W 21.00% -0.350 34.8 kg -65 W, hotter, -2.3 pp
QNM210-HG600-60 600 W 21.20% -0.350 34.8 kg -60 W, hotter, -2.1 pp
QNM210-HG605-60 605 W 21.40% -0.350 34.8 kg -55 W, hotter, -1.9 pp
QNM210-HG610-60 610 W 21.60% -0.350 34.8 kg -50 W, hotter, -1.7 pp
GKA210N120 680 W 24.03% -0.340 28.0 kg Hotter, lighter, +0.7 pp
GKA210N120-675 675 W 23.85% -0.340 28.0 kg Hotter, lighter, +0.6 pp
QN-670HJT-01 670 W 23.70% -0.240 35.5 kg +10 W, +0.4 pp
GKA210N120-670 670 W 23.67% -0.340 28.0 kg Hotter, lighter, +0.4 pp

Found 497 panels of the same or similar size to this one, within ±10 mm. See them here Found 502 panels of the same or similar size to this one, within ±25 mm. See them here Found 502 panels of the same or similar size to this one, within ±50 mm. See them here Found 506 panels of the same or similar size to this one, within ±100 mm. See them here

Common questions

6 answered
What warranty does the Q-SUN Solar Qrystal Max N12 come with and what does it cover?
The Qrystal Max N12 series includes a 15-year product warranty covering material and workmanship defects, plus a 30-year linear power output warranty. The power warranty guarantees the module retains a defined percentage of its rated wattage over three decades of operation. This is a competitive warranty tier for N-type TOPCon modules and one of the key arguments for the series' long-term investment value.
Is the Q-SUN Solar Qrystal Max N12 series still available for purchase?
The Qrystal Max N12 series has been discontinued and is no longer available as a new product. If you need N-type TOPCon modules in the 640–670 W power class, we recommend inquiring about current replacement models in Q-SUN Solar's lineup or considering equivalent high-power alternatives from other manufacturers that are available through active distribution channels.
What does bifacial technology mean in the Qrystal Max N12 and when does it actually pay off?
Bifacial technology means the Qrystal Max N12 generates electricity from both the front and rear surfaces by capturing light reflected off the ground or rooftop surface. The biggest gains come from light-colored substrates — white TPO membranes, gravel ballast, or grass. On ground-mount systems and large flat industrial roofs, bifacial gain can add several percentage points to annual energy yield at no additional hardware cost.
Do the N-type cells in the Qrystal Max N12 really degrade slower than standard P-type panels?
Yes. N-type cells are significantly less susceptible to light-induced degradation (LID) — the power loss triggered by initial sun exposure that affects conventional P-type PERC cells. This translates to higher cumulative energy production over a 25–30 year system lifetime and a better LCOE for the overall installation, which is particularly relevant for large commercial and utility-scale projects.
What type of installations are the Q-SUN Solar Qrystal Max N12 640–670W modules best suited for?
With peak output up to 670 Wp and large physical dimensions, the Qrystal Max N12 is designed primarily for utility-scale solar farms, large industrial rooftops, and commercial ground-mount projects. It is not a typical fit for small residential systems — the module size and weight require purpose-built racking structures and an experienced installation crew to handle safely and efficiently.
How do the Qrystal Max N12 panels perform under cloudy skies and diffuse irradiance?
The TOPCon cell architecture in the Qrystal Max N12 delivers solid low-light performance, meaning the modules produce proportionally more energy during overcast mornings, evenings, and diffuse-light days compared to older PERC technology. This is a meaningful advantage in Central European climates like Poland's, where diffuse irradiance accounts for a substantial share of annual energy yield and full-sun hours are limited.
Add to compare