Middle of its segment, weak in heat
The Q-SUN Solar QNM210-HG-60 panel series is an advanced solution based on 210 mm format cells that redefines efficiency standards in professional installations. Thanks to the use of Bifacial PERC Half-Cell technology, these modules not only generate energy from direct solar radiation but also effectively utilize light reflected from the ground. The half-cell construction effectively reduces losses resulting from internal resistance and significantly increases the panel's resistance to partial shading, which is crucial in the variable weather conditions of Poland. Utilizing bifacial energy generation allows investors to maximize yields from every square meter of surface, especially when installed on bright surfaces or tracking systems. This solution is primarily dedicated to large photovoltaic farms and commercial facilities, where the key indicator is the lowest levelized cost of energy (LCOE). This series is distinguished from the competition by a precise combination of high power density and exceptional thermal stability, which guarantees long-term operational reliability and a faster return on investment. The robust frame design provides protection against extreme mechanical loads, making this series one of the most cost-effective choices in the premium segment for demanding energy projects.
Ranking
Signals from the data
Utility-scale, commercial and shaded-installations.
Hot climates.
Bottom 20% of the PERC 600-650 W segment, against a median of -0.340.
Bifacial construction captures light reflected from the ground surface, delivering a real yield boost over monofacial modules of equivalent nominal power when installed over light-colored surfaces (gravel, roofing membrane, tracker systems).
Half-cell architecture lowers resistive losses and improves partial-shading tolerance, which matters under variable irradiance and incidence angles typical of Polish weather conditions.
The manufacturer specifies <2% first-year degradation and <0.45% per year afterward, guaranteeing at least 84.95% of initial power after 30 years - better than the typical 25-year/80.7% standard for older PERC modules.
The top variant reaches 610 Wp at 21.6% efficiency, matching the leading peer comparable GCL-M12/60GDF (610 Wp/21.6%) and exceeding Techwise Solar Summit Series (610 Wp/21.55%).
The strengthened frame improves resistance to snow and wind loads, relevant for utility-scale and commercial installations exposed to extreme weather conditions.
Q-SUN Solar (founded 2014) does not appear on the BNEF Tier-1 manufacturer list, unlike major players in the peer comparables such as GCL. This can complicate bank financing for large-scale farm projects where bankability is a lender requirement.
Maximum efficiency of 21.6% is nearly 2 percentage points behind Renewsys DESERV Extreme TOPCon (23.64% at the same 610 Wp power class), meaning a larger installation footprint is needed for comparable output.
The premium segment is shifting toward N-type TOPCon and HJT cells with lower LID degradation and better high-temperature performance; P-type PERC technology may see reduced resale value and price competitiveness longer term.
- Efficiency of 21.2% matches the PERC 600-650W median
- At 212.0 W/m² power density, roof space requirements are typical for PERC 600-650W panels
- Temperature coefficient of -0.35%/°C matches the PERC 600-650W median
- Ranked #9076 out of 14005 panels for efficiency in the database
Specifications
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Alternatives
Found 497 panels of the same or similar size to this one, within ±10 mm. See them here Found 502 panels of the same or similar size to this one, within ±25 mm. See them here Found 502 panels of the same or similar size to this one, within ±50 mm. See them here Found 506 panels of the same or similar size to this one, within ±100 mm. See them here