Skip to main content
Jinko Solar JKM605-630N-66HL4M-BDV-F3-EN (630W)

Jinko Solar JKM605-630N-66HL4M-BDV-F3-EN (630W)

630 Wp TOPCon Bifacial 80%
ComparePV verdict

Efficiency leader, no clear weak spot

Rank 1,987 of 14,129
Compare panels Datasheet PDF
Power (Wp)
630
Typical for its class
Efficiency (%)
23.32
Strong · top 15%
Density (Wp/m²)
233.2
Strong · top 16%
Temp (%/°C)
-0.290
Typical · median -0.290
Weight (kg)
32.4
Typical · median 32.8 kg
Warranty (yrs)
30
Typical · median 30 yrs

The Jinko Solar Tiger Neo 66HL4M-BDV (605-630W) series was designed for installations where achieving high yield from the same surface area and stable performance over a long lifespan are key priorities. These are dual-sided (bifacial) modules in a dual-glass construction, effectively utilizing reflected light from the ground - a real benefit on light-colored roofs, gravel, TPO/PVC membranes, or in farms with appropriate albedo.

The used N-type TOPCon cells stand out with low susceptibility to typical degradation in the initial years of operation and good performance under lower irradiance. In practice, this means more predictable results, even under Poland's weather conditions. The modules feature a positive power tolerance, facilitating precise string design without the risk of "weaker panels".

This is an excellent choice for PV farms, industrial halls, and commercial buildings, where longevity, environmental resistance, and maximizing energy output from each structural section are crucial.

Ranking

1,085 panels in the segment TOPCon 600-650 W
Metric This panel Median Position in segment Overall rank
Module efficiency 23.32% 22.80% Strong · top 15% 1,012
Power density 233.2 227.7 Strong · top 16% 1,042
Temperature coefficient -0.290 -0.290 Typical 2,220
Weight per kWp 51.4 53.1 Typical 4,830
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

7 positive · 1 caution
Best for

Commercial, utility-scale and hot-climate.

Strengths
23.32% module efficiency

Top 15% of the TOPCon 600-650 W segment, against a median of 22.80%.

233.2 watts per square metre

Top 16% of the TOPCon 600-650 W segment, against a median of 227.7.

What owners get
N-type TOPCon cells with HOT 3.0

Second-generation TOPCon (HOT 3.0) delivers a Pmax temperature coefficient of -0.29%/°C vs. ~-0.35% for conventional PERC cells, and effective power generation time approximately 11% longer than P-type modules. N-type architecture virtually eliminates LID degradation, resulting in more predictable energy yields throughout the 30-year service life.

Up to 23.32% efficiency - top of peer group

Peak module efficiency of 23.32% matches Canadian Solar TOPBiHiKu6 Anti-Dust (23.3%) and exceeds both Leapton LP182*199-M-72-NH and AUSTA ENERGY AU-156MH (each at 22.54%) by nearly 0.8 percentage points. At identical roof or ground area, this translates to measurably higher annual energy yield without increasing module count.

Bifacial dual-glass - up to 30% rear-side gain

The dual-glass bifacial design achieves up to 30% bifacial gain (per official JinkoSolar Tiger Neo whitepaper), effectively harvesting albedo from high-reflectivity surfaces such as TPO/PVC membranes, gravel, and snow. Double-glass construction eliminates EVA yellowing risk and significantly reduces long-term PID susceptibility vs. glass-backsheet alternatives.

30-year linear power warranty (≥87.4%)

JinkoSolar guarantees ≥99% rated output in year 1 and ≥87.4% after 30 years, with annual degradation of approximately 0.4%. Combined with a 12-year product warranty and 0~+3 W positive power tolerance, this series carries one of the strongest warranty packages available in the >600 Wp segment.

Jinko Solar - BNEF #1 bankability for 10 consecutive years

JinkoSolar is the only PV module manufacturer rated 100% bankable in the Bloomberg NEF PV Module Bankability Survey (2024), maintaining Tier-1 status for more than 10 consecutive years. This simplifies non-recourse project financing and reduces counterparty risk for institutional investors and project finance lenders.

Trade-offs
Series discontinued in 2025

The 66HL4M-BDV (605-630 W) series was discontinued in 2025 (released 2023, end_year 2025). This results in limited and declining new-module availability on the market, creates supply-chain gaps for system expansions, and may complicate long-term serviceability and like-for-like replacement of failed units.

Notes from the database
  • At 23.3% efficiency, this panel is 0.5pp above typical TOPCon 600-650W modules (median: 22.8%)
  • Power density of 233.2 W/m² packs 5.5 W/m² more into the same footprint vs TOPCon 600-650W median (227.7 W/m²)
  • Temperature coefficient of -0.29%/°C matches the TOPCon 600-650W median
  • Bifacial design (80% factor) captures reflected light - adds 4-12% yield on ground-mount or white roof
  • #1012 for efficiency, #2220 for temperature performance out of 14129 panels

Specifications

Open datasheet PDF
Nominal power (Pmax) 630 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 23.32 % Strong Segment median 22.80%
Vmpp · Impp 41.02 V · 15.36 A Operating point at max power
Voc · Isc 49.48 V · 16.20 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 2382×1134×30 mm · 2.70 m² of roof
Weight 32.4 kg Typical Typical · median 32.8 kg
Cells 132 · TOPCon Monocrystalline
Bifaciality 80 % Rear output as a share of front
Coefficient Pmax -0.290 %/°C Typical median -0.290 of its segment
Coefficient Voc · Isc -0.250 · 0.045 %/°C
Product warranty 12 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 87.4 % Equals 551 W guaranteed
Degradation 1.00 → 0.40 % First year, then annual

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.290 %/°C against a segment median of -0.290
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Filter these
Size
Panel Power Eff. Temp. Weight Difference
Jinko Solar JKM605-630N-66HL4M-BDV-F3-EN (630W) 630 W 23.32% -0.290 32.4 kg You are here
AIKO-A650-MAE72Mw 650 W 25.20% -0.260 27.0 kg Cooler, lighter, +1.9 pp
AIKO-A680-MDE72Mw 680 W 25.20% -0.260 29.0 kg +50 W, lighter, +1.9 pp
AIKO-A675-MDE72Mw 675 W 25.00% -0.260 29.0 kg +45 W, lighter, +1.7 pp
AIKO-A645-MAE72Mw 645 W 25.00% -0.260 27.0 kg Cooler, lighter, +1.7 pp
WST-675BKX72-A2 675 W 25.00% -0.260 32.1 kg +45 W, cooler, +1.7 pp
AIKO-G670-MCH72Mw 670 W 24.80% -0.260 28.2 kg +40 W, lighter, +1.5 pp
LR7-72HVHF-670M 670 W 24.80% -0.260 28.5 kg +40 W, lighter, +1.5 pp
JKM605-630N-66HL4M-BDV-F3-EN (605W column) 605 W 22.40% -0.290 32.4 kg -25 W, -0.9 pp
JKM605-630N-66HL4M-BDV-F3-EN (610W column) 610 W 22.58% -0.290 32.4 kg -20 W, -0.7 pp
JKM605-630N-66HL4M-BDV-F3-EN (615W column) 615 W 22.77% -0.290 32.4 kg -15 W, -0.6 pp
AIKO-A700-MAE78Dw 700 W 25.00% -0.260 34.5 kg +70 W, cooler, +1.7 pp
AIKO-A695-MAE78Dw 695 W 24.90% -0.260 34.5 kg +65 W, cooler, +1.6 pp
JKM650-670N-66QL6-BDV (670W class) 670 W 24.80% -0.260 32.5 kg +40 W, cooler, +1.5 pp

Found 1144 panels of the same or similar size to this one, within ±10 mm. See them here Found 1150 panels of the same or similar size to this one, within ±25 mm. See them here Found 1261 panels of the same or similar size to this one, within ±50 mm. See them here Found 1942 panels of the same or similar size to this one, within ±100 mm. See them here

About the Tiger Neo 66HL4M-BDV (605–630W) series

6 answered

These answers cover the whole series. Where a figure differs, the specification above is this module's own.

Is the Jinko Solar Tiger Neo 66HL4M-BDV (605-630W) series still available?
The Tiger Neo 66HL4M-BDV series has been officially discontinued and is no longer in production. Modules may still be available in limited quantities from distributor stock. For new installations, it is worth asking about the current Jinko Solar series that have replaced this line.
What warranty does the Jinko Solar Tiger Neo 66HL4M-BDV come with?
Jinko Solar provides a 12-year product warranty covering manufacturing defects and a 30-year linear power warranty guaranteeing at least 87.4% of rated output after 30 years. The dual-glass construction also reduces moisture ingress, resulting in lower long-term degradation compared to conventional backsheet modules.
Do the bifacial 66HL4M-BDV modules make practical sense in Polish or Central European conditions?
Yes, though bifacial gain depends on ground albedo. In Poland, these modules perform best on light-colored rooftops with gravel ballast or white TPO/PVC membranes, and on ground-mount arrays with adequate clearance height. Realistic bifacial gain in this climate typically ranges from 5-15% over a comparable monofacial module at the same rated power. Dark surfaces reduce this benefit significantly.
How does the Tiger Neo 66HL4M-BDV handle summer heat and low winter irradiance?
The N-type TOPCon cells have a temperature coefficient of Pmax at -0.29%/°C, more favorable than typical PERC cells at -0.35%/°C, meaning smaller power losses on hot days. In low-irradiance conditions typical of Polish winters and overcast days, TOPCon also outperforms older technologies, delivering more predictable energy output year-round.
What types of installations are the Tiger Neo 66HL4M-BDV 630W modules best suited for?
At up to 630 Wp and 2382×1134 mm, these modules are designed primarily for utility-scale PV farms and large commercial installations such as warehouses, production halls, and industrial facilities. The 32.4 kg weight and large format require robust racking structures and an experienced installation crew. They are not recommended for typical residential rooftop systems due to their size and weight.
How do the TOPCon cells in the 66HL4M-BDV differ from older PERC cells?
TOPCon (Tunnel Oxide Passivated Contact) is an N-type technology that passivates surface defects using a thin tunnel oxide layer. This yields module efficiency up to 23.32%, lower first-year degradation, and resistance to LID (Light-Induced Degradation) that affects P-type PERC cells. The result is more stable and predictable energy production throughout the full 30-year warranty period.
Add to compare