Skip to main content

JKM605-630N-66HL4M-BDV-F3-EN (610W column)

610 Wp N-type Bifacial 80%
ComparePV verdict

Solid all-round for its segment

Rank 3,323 of 14,005
Compare panels Datasheet PDF
Power (Wp)
610
Weak · bottom 17%
Efficiency (%)
22.58
Typical · median 22.77%
Density (Wp/m²)
225.8
Typical · median 227.7
Temp (%/°C)
-0.290
Typical · median -0.290
Weight (kg)
32.4
Typical · median 32.5 kg
Warranty (yrs)
30
Typical · median 30 yrs

The Jinko Solar Tiger Neo 66HL4M-BDV series are bifacial glass-glass modules engineered to genuinely increase energy yield not only from the front but also from the rear-particularly on light-coloured roofs, gravel ballast systems, and ground-mounted installations with high albedo. The key advantage lies in the N-type TOPCon cell technology, which minimizes typical losses associated with degradation and enables more stable long-term performance. In practice, this translates to fewer disappointments after a few seasons and easier planning for investment profitability.

Additionally, the SMBB (Multi-Silicon Busbar) interconnect structure enhances module performance under partial shading and micro-cracking, while the enhanced PID resistance is crucial in systems operating at higher voltages. The entire design is supported by the dual-glass construction, valued for its durability in demanding conditions, including humid environments and large temperature fluctuations.

This is an excellent choice for utility-scale PV farms, large commercial rooftops, and projects where maximizing energy yield from the same surface area and ensuring predictable long-term energy production are key priorities.

Ranking

359 panels in the segment N-type 600-650 W
Metric This panel Median Position in segment Overall rank
Module efficiency 22.58% 22.77% Typical 3,828
Power density 225.8 227.7 Typical 3,729
Temperature coefficient -0.290 -0.290 Typical 2,165
Weight per kWp 53.1 52.7 Typical 6,906
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

5 positive · 1 caution
Best for

Commercial, utility-scale, shaded-installations and hot-climate.

What owners get
N-type TOPCon — low degradation rate

N-type TOPCon cells deliver a linear degradation rate of only 0.4%/year (1% in year one), guaranteeing 87.4% of nameplate power after 30 years. Comparable P-type PERC modules typically degrade at 0.45–0.55%/year, yielding only ~83–85% by year 30 — a multi-percentage-point gap that translates into measurably higher lifetime MWh output.

22.4–23.32% efficiency — top of peer segment

Peak module efficiency of 23.32% matches the closest peer (Canadian Solar TOPBiHiKu6 Anti-Dust: 23.3%) and clearly outperforms Leapton LP182 and AUSTA AU-156MH (both 22.54%). Higher efficiency reduces BoS costs (racking, cabling, labor) per kWp installed, particularly valuable on area-constrained rooftops.

Bifacial glass-glass with ~85% bifacial factor

The dual-glass bifacial design with a bifacial factor up to 85% delivers 5–15% additional energy from the rear side in high-albedo environments (light-colored rooftops, gravel ballast, snow, reflective ground). The all-glass encapsulation virtually eliminates LID and LeTID, directly supporting long-term yield stability over a 25–30 year asset life.

30-year linear power warranty

JinkoSolar guarantees ≥99% of nameplate power after year 1 and ≥87.4% after 30 years — one of the longest and most stringent linear power warranties in the segment. Many competing Tier-1 series cap the power warranty at 25 years or set a lower end-of-life floor (e.g., 84.8% for older PERC lines), a meaningful difference in LCOE calculations.

Jinko Solar — #1 bankability, BNEF 2025

JinkoSolar is the only module manufacturer rated bankable by 100% of respondents in the Bloomberg BNEF Bankability Report 2025, maintaining Tier-1 status for over a decade. For projects requiring project-finance approval or bank acceptance (utility-scale IPPs, large commercial rooftop), this significantly de-risks the bankability due-diligence process.

Trade-offs
~33.4 kg weight — structural load concern

The dual-glass construction (2 mm front + 2 mm rear glass) results in a module weight of ~33.4 kg, roughly 15–18% heavier than comparable glass-foil modules of similar wattage (typically 28–30 kg). On rooftops with limited load capacity, this may require structural reinforcement or reduced panel density, increasing BoS costs for residential and light-commercial installations.

Notes from the database
  • Efficiency of 22.6% matches the N-type 600-650W median
  • Power density of 225.8 W/m² matches the N-type 600-650W median
  • Temperature coefficient of -0.29%/°C matches the N-type 600-650W median
  • 80% bifaciality enables rear-side power generation, boosting yield by 4-12% on reflective surfaces
  • Ranked #3828 out of 14005 panels for efficiency in the database

Specifications

Open datasheet PDF
Nominal power (Pmax) 610 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 22.58 % Typical Segment median 22.77%
Vmpp · Impp 40.46 V · 15.08 A Operating point at max power
Voc · Isc 48.68 V · 15.96 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 2382×1134×30 mm · 2.70 m² of roof
Weight 32.4 kg Typical Typical · median 32.5 kg
Cells 132 · N-type Monocrystalline
Bifaciality 80 % Rear output as a share of front
Coefficient Pmax -0.290 %/°C Typical median -0.290 of its segment
Coefficient Voc · Isc -0.250 · 0.045 %/°C
Product warranty 12 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 87.4 % Equals 533 W guaranteed
Degradation 1.00 → 0.40 % First year, then annual

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.290 %/°C against a segment median of -0.290
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Filter these
Size
Panel Power Eff. Temp. Weight Difference
Jinko Solar JKM605-630N-66HL4M-BDV-F3-EN (610W column) 610 W 22.58% -0.290 32.4 kg You are here
AIKO-A650-MAE72Mw 650 W 25.20% -0.260 27.0 kg +40 W, lighter, +2.6 pp
AIKO-A645-MAE72Mw 645 W 25.00% -0.260 27.0 kg +35 W, lighter, +2.4 pp
LR7-60HVH-560M 560 W 24.80% -0.260 25.0 kg -50 W, lighter, +2.2 pp
AIKO-A640-MAE72Mw 640 W 24.80% -0.260 27.0 kg +30 W, lighter, +2.2 pp
AIKO-A635-MAE72Mw 635 W 24.60% -0.260 27.0 kg Cooler, lighter, +2.0 pp
LR8-66HVD-660M 660 W 24.43% -0.260 33.5 kg +50 W, cooler, +1.9 pp
JKM605-630N-66HL4M-BDV-F3-EN (605W column) 605 W 22.40% -0.290 32.4 kg Very close match
JKM605-630N-66HL4M-BDV-F3-EN (615W column) 615 W 22.77% -0.290 32.4 kg Very close match
AIKO-A680-MDE72Mw 680 W 25.20% -0.260 29.0 kg +70 W, lighter, +2.6 pp
AIKO-A675-MDE72Mw 675 W 25.00% -0.260 29.0 kg +65 W, lighter, +2.4 pp
AIKO-A700-MAE78Dw 700 W 25.00% -0.260 34.5 kg +90 W, cooler, +2.4 pp
AIKO-A695-MAE78Dw 695 W 24.90% -0.260 34.5 kg +85 W, cooler, +2.3 pp
AIKO-G670-MCH72Mw 670 W 24.80% -0.260 28.2 kg +60 W, lighter, +2.2 pp
LR7-72HVHF-670M 670 W 24.80% -0.260 28.5 kg +60 W, lighter, +2.2 pp
JKM650-670N-66QL6-BDV (670W class) 670 W 24.80% -0.260 32.5 kg +60 W, cooler, +2.2 pp

Found 1119 panels of the same or similar size to this one, within ±10 mm. See them here Found 1125 panels of the same or similar size to this one, within ±25 mm. See them here Found 1236 panels of the same or similar size to this one, within ±50 mm. See them here Found 1917 panels of the same or similar size to this one, within ±100 mm. See them here

Common questions

6 answered
What warranty comes with the Jinko Solar Tiger Neo 66HL4M-BDV panels?
The Tiger Neo 66HL4M-BDV series carries a 12-year product warranty covering material and workmanship defects, along with a 30-year linear power warranty. Jinko guarantees that after 30 years of operation the module will retain at least 87.4% of its nominal power, with a maximum annual degradation rate of 0.4%. This is among the strongest power warranties currently available in the utility-scale PV module market.
How much extra energy does the bifacial design of the Tiger Neo 66HL4M-BDV actually produce, and where does it make sense?
The 66HL4M-BDV modules have a bifaciality factor of approximately 80%, meaning the rear side can contribute up to 80% of the front-side yield under ideal conditions. Real-world gains are most significant in ground-mount systems with high-albedo surfaces (gravel, sand, white concrete) and flat rooftops with reflective membranes. On a typical dark pitched roof, the bifacial advantage is marginal and rarely exceeds a few percent.
How do the Jinko Tiger Neo 66HL4M-BDV panels perform in high temperatures during summer?
The N-type TOPCon cell technology delivers a temperature coefficient of Pmax of -0.29%/°C, which is noticeably better than standard PERC modules at -0.34 to -0.35%/°C. In practice, at a module temperature of 50°C, power losses are several percentage points lower than a comparable PERC module. This translates into measurably higher energy yield on hot summer days when the gap between technologies is most pronounced.
Can the Tiger Neo 66HL4M-BDV panels withstand heavy snow loads and strong wind?
Yes. The dual-glass construction and certified mechanical ratings allow these modules to handle a front snow load of up to 5400 Pa and a rear wind pressure of up to 2400 Pa. This makes them suitable for installations in mountain regions and areas with severe weather conditions, where standard aluminum-framed modules might underperform or require additional structural reinforcement.
What types of installations is the Jinko Solar Tiger Neo 66HL4M-BDV series best suited for?
The 66HL4M-BDV modules with up to 630 Wp are designed primarily for utility-scale solar farms, large commercial flat-roof installations, and ground-mount projects. Their large footprint (2382×1134 mm) and high per-unit power output reduce BoS and labor costs per megawatt. For small residential pitched-roof installations, a smaller-format Jinko panel would be a more practical choice.
Are the N-type TOPCon cells in the Tiger Neo 66HL4M-BDV more resistant to degradation than PERC?
Yes. N-type TOPCon cells do not exhibit the LID (Light Induced Degradation) characteristic of P-type PERC cells. Additionally, TOPCon technology offers improved resistance to PID (Potential Induced Degradation), which is particularly relevant in high-voltage string systems. The guaranteed annual power degradation of just 0.4% reflects the long-term output stability that makes this series a reliable choice for projects where predictable LCOE matters.
Add to compare