Skip to main content

YH720W-33MHD/MH

720 Wp TOPCon Bifacial
ComparePV verdict

Middle of its segment, weak in heat

Rank 1,694 of 14,005
Compare panels Datasheet PDF
Power (Wp)
720
Typical for its class
Efficiency (%)
23.18
Typical · median 23.00%
Density (Wp/m²)
231.8
Typical · median 230.2
Temp (%/°C)
-0.350
Weak · bottom 1%
Weight (kg)
38.0
Typical · median 38.0 kg
Warranty (yrs)
30
Typical · median 30 yrs

The Isola New Energy 210M HALF CELL Bifacial Topcon Technology series is an advanced solution based on N-type cells that redefines performance standards in the Polish renewable energy sector. The use of large 210 mm silicon wafers combined with half-cut cell architecture allows for a significant reduction in resistance losses and better performance in demanding partial shading conditions. A key advantage of these modules is bifacial technology, which enables the generation of additional energy from the back side of the panel, resulting in a clear increase in yields, especially for ground-mounted installations with a bright surface. Thanks to the use of TOPCon technology, the panels exhibit minimal light-induced degradation and significantly higher efficiency in diffuse light, effectively solving the problem of low performance on cloudy days. This series is primarily dedicated to investors focusing on maximizing the profitability of large-scale commercial projects and modern prosumer installations, where every kilowatt-hour matters. What distinguishes it from competing solutions is an exceptional temperature coefficient, which guarantees energy production stability even during extreme summer heat, ensuring investment safety and predictability over long years of operation in the variable Polish climate.

Ranking

420 panels in the segment TOPCon 700-750 W
Metric This panel Median Position in segment Overall rank
Module efficiency 23.18% 23.00% Typical 1,424
Power density 231.8 230.2 Typical 1,347
Temperature coefficient -0.350 -0.290 Weak · bottom 1% 10,419
Weight per kWp 52.8 52.9 Typical 6,459
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

5 positive · 2 caution
Not ideal for

Hot climates.

Watch-outs
-0.350 %/°C temperature coefficient

Bottom 1% of the TOPCon 700-750 W segment, against a median of -0.290. Ranked 10,419th in the whole database.

What owners get
Efficiency at the top of the 710–720 Wp segment

The efficiency range of 22.86–23.18% is identical to peer comparables Gamko GKA210N132 and Renesola RS9-NBG-E1 (both at 23.18%) and only 0.02 pp below DMEGC DMxxxG12T-B66HSW (23.2%). The series therefore sits at the very front of the 210 mm / 132-cell class with no meaningful energy-yield penalty versus direct competition.

TOPCon N-type: lower Tcoeff. and LID immunity

TOPCon N-type panels deliver a typical Pmax temperature coefficient of -0.30%/°C versus -0.34%/°C for P-type PERC. At NOCT = 45°C and summer cell temperatures of +70°C, the gap amounts to ~+1.2% retained power output. N-type substrates show virtually zero Light-Induced Degradation (LID/LeTID), reducing real annual degradation to 0.4–0.5% vs. 0.6–0.8% for PERC.

Bifacial TOPCon with ~85% bifaciality factor

TOPCon cells achieve a bifaciality factor of ~85% versus ~70% typical for PERC bifacial modules. In ground-mounted systems with a reflective surface (albedo 0.2–0.4) this translates to 8–25% additional rear-side energy gain, corroborated by independent field data (Energy Science & Engineering, 2025: TOPCon delivered +8.16% yield vs. bifacial PERC in vertical-mount conditions).

30-year linear power warranty

The manufacturer provides a 30-year linear power warranty (typically ≥87.4% of Pnom after 30 years for TOPCon 30Y class). Most tier-2 PERC modules offer only a 25-year warranty with an end-of-life guarantee of 84.8%, giving this series a measurable LCOE advantage over the full installation lifecycle.

Half-cut 132-cell architecture with 210 mm wafers

Splitting each 210 mm cell in half reduces resistive losses (I²R) by ~50% compared to full-cell 210 mm modules at the same rated power. The series also delivers improved partial-shading tolerance by operating as two independent half-strings, limiting losses in rooftop systems with obstructions or ground-mounted arrays with row-to-row shading.

Trade-offs
Not on BNEF Tier-1 list

Zhejiang Isola New Energy (est. 2006, declared production capacity ~500 MW–3 GW) does not appear on the BNEF Tier-1 Solar Module Manufacturers list for Q1 2026, which includes Longi, JA Solar, Trina Solar, Canadian Solar, and other leading manufacturers. Tier-1 status is a standard requirement in most term sheets for bank-financed projects above 1 MWp — its absence can increase financing costs or result in rejection during lender due diligence.

Notes from the database
  • At 23.2% efficiency, this panel is on par with typical TOPCon 700-750W modules
  • At 231.8 W/m² power density, roof space requirements are typical for TOPCon 700-750W panels
  • -0.35%/°C temperature coefficient - 0.06pp worse than TOPCon 700-750W median (-0.29%/°C), expect higher hot weather losses
  • Ranked #1424 out of 14005 panels for efficiency in the database

Specifications

Open datasheet PDF
Nominal power (Pmax) 720 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 23.18 % Typical Segment median 23.00%
Vmpp · Impp 41.52 V · 17.34 A Operating point at max power
Voc · Isc 49.82 V · 18.13 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 2384×1303×33 mm · 3.11 m² of roof
Weight 38.0 kg Typical Typical · median 38.0 kg
Cells 132 · TOPCon Monocrystalline
Coefficient Pmax -0.350 %/°C Weak bottom 1% of its segment
Coefficient Voc · Isc -0.250 · 0.040 %/°C
NOCT 45 °C At 800 W/m², 20 °C ambient
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 87.4 % Equals 628 W guaranteed
Degradation 2.00 → 0.37 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by Isola New Energy in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 720 Wp appear here. The rest cover the whole series.

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.350 %/°C against a segment median of -0.290
-
Filter these
Size
Panel Power Eff. Temp. Weight Difference
Isola New Energy YH720W-33MHD/MH 720 W 23.18% -0.350 38.0 kg You are here
AIKO-A680-MDE72Mw 680 W 25.20% -0.260 29.0 kg Cooler, lighter, +2.0 pp
AIKO-A675-MDE72Mw 675 W 25.00% -0.260 29.0 kg Cooler, lighter, +1.8 pp
AIKO-A700-MAE78Dw 700 W 25.00% -0.260 34.5 kg Cooler, lighter, +1.8 pp
AIKO-A695-MAE78Dw 695 W 24.90% -0.260 34.5 kg Cooler, lighter, +1.7 pp
AIKO-G670-MCH72Mw 670 W 24.80% -0.260 28.2 kg Cooler, lighter, +1.6 pp
LR7-72HVHF-670M 670 W 24.80% -0.260 28.5 kg Cooler, lighter, +1.6 pp
JKM650-670N-66QL6-BDV (670W class) 670 W 24.80% -0.260 32.5 kg Cooler, lighter, +1.6 pp
YH710W-33MHD/MH 710 W 22.86% -0.350 38.0 kg -10 W, -0.3 pp
YH715W-33MHD/MH 715 W 23.02% -0.350 38.0 kg Very close match
AIKO-A805-GRH78Dw 805 W 25.10% -0.260 39.8 kg +85 W, cooler, +1.9 pp
AIKO-A800-GRH78Dw 800 W 24.90% -0.260 39.8 kg +80 W, cooler, +1.7 pp
AIKO-A795-GRH78Dw 795 W 24.80% -0.260 39.8 kg +75 W, cooler, +1.6 pp
AIKO-A790-GRH78Dw 790 W 24.60% -0.260 39.8 kg +70 W, cooler, +1.4 pp
TSM-NEG21C.20Q-760 760 W 24.50% -0.260 38.3 kg +40 W, cooler, +1.3 pp
AIKO-A785-GRH78Dw 785 W 24.40% -0.260 39.8 kg +65 W, cooler, +1.2 pp
GK-4-78HGBD-780M 780 W 24.30% -0.260 38.7 kg +60 W, cooler, +1.1 pp

Found 1390 panels of the same or similar size to this one, within ±10 mm. See them here Found 1400 panels of the same or similar size to this one, within ±25 mm. See them here Found 1400 panels of the same or similar size to this one, within ±50 mm. See them here Found 1432 panels of the same or similar size to this one, within ±100 mm. See them here

Common questions

6 answered
What is the maximum power output of the Isola New Energy 210M HALF CELL Bifacial TOPCon panels and what installations are they designed for?
Modules in the Isola New Energy 210M HALF CELL Bifacial TOPCon series reach a peak power of up to 720 Wp, placing them firmly in the utility-scale segment. They are primarily intended for large commercial installations and solar farms, but also suit ambitious prosumer systems where maximizing energy yield per square meter of roof or ground area is the priority.
How long is the power output warranty on the Isola New Energy 210M Bifacial TOPCon series?
The manufacturer provides a 30-year linear power output warranty for this series. This means that after 30 years of operation the panel must retain at least the minimum power percentage stated in the warranty document. N-type TOPCon technology inherently suppresses light-induced degradation, resulting in more stable energy production throughout the entire warranty period.
What does bifacial technology mean in the Isola 210M series and is the premium worth it?
Bifacial means the panel generates electricity from both its front and rear surfaces. In ground-mount systems over a reflective surface, or when installed above a light-colored roof membrane, the additional rear-side energy gain typically ranges from 5 to 15 percent compared to a monofacial equivalent. The return on investment is faster wherever the albedo is high, such as concrete, light gravel, or snow cover in winter.
Do the Isola New Energy 210M TOPCon panels perform well on cloudy days and in extreme heat?
Yes, TOPCon technology on N-type cells delivers higher efficiency under diffuse irradiance compared to standard PERC cells, which translates into better yields in Poland's variable climate. A temperature coefficient close to minus 0.30 percent per degree Celsius also means smaller power losses during summer heat waves than older technologies, keeping annual energy production stable and predictable.
How do the TOPCon cells in the Isola 210M series differ from widely used PERC cells?
TOPCon is the next generation beyond PERC. The key difference is a tunnel-oxide passivating contact layer on the rear side that drastically reduces carrier recombination. The result is cell efficiency often exceeding 23 percent, significantly lower light-induced degradation, and better low-light performance. The Isola 210M series uses N-type wafers, which further extends the module's practical service life well beyond the stated 30-year warranty.
Do the large 210M module dimensions of the Isola series cause problems during installation on a pitched roof?
210M-class modules rated at 720 Wp have large dimensions, approximately 2280 by 1134 mm, and weigh around 30 to 35 kg. On pitched roofs this requires a robust racking structure and an experienced installation crew. These modules are far more practical in ground-mount systems or on large, unobstructed roof planes of industrial buildings. For typical residential roofs, smaller modules in the 400 to 500 Wp range are a more manageable choice.
Add to compare