Skip to main content
Heliene 156HC-635 M10 NTYP SL
Heliene Brand review

156HC-635 M10 NTYP SL

635 Wp N-type Bifacial 80%
ComparePV verdict

Middle of its segment, short guarantee

Rank 2,641 of 14,005
Compare panels Datasheet PDF
Power (Wp)
635
Strong · top 22%
Efficiency (%)
22.73
Typical · median 22.77%
Density (Wp/m²)
227.3
Typical · median 227.7
Temp (%/°C)
-0.300
Weak · bottom 11%
Weight (kg)
31.0
Typical · median 32.5 kg
Warranty (yrs)
25
Weak · bottom 4%

The 156HC M10 NTYP SL Bifacial series is designed for investors who want to squeeze maximum energy yield out of limited roof or ground space. The module is built on N-type TOPCon technology, which, unlike older PERC cells, offers lower degradation over time and better performance at high temperatures, translating into a real gain in annual energy output. The use of half-cut cells reduces series resistance losses and improves the panel's resilience to partial shading, keeping production stable even under less favorable conditions. The bifacial design captures light reflected off the ground, making this model particularly attractive for solar farms and installations on light, reflective surfaces. Mechanical durability is supported by a reinforced frame engineered for higher snow and wind loads, while 3.2mm tempered glass adds extra resistance to mechanical damage and hail. This makes the series a solid choice for both commercial investors and developers of large ground-mount projects who prioritize low failure rates and predictable performance over the long service life of the installation.

Ranking

359 panels in the segment N-type 600-650 W
Metric This panel Median Position in segment Overall rank
Module efficiency 22.73% 22.77% Typical 3,241
Power density 227.3 227.7 Typical 3,230
Temperature coefficient -0.300 -0.290 Weak · bottom 11% 6,093
Weight per kWp 48.8 52.7 Typical 2,487
Performance warranty 25 yrs 30 yrs Weak · bottom 4% 9,798
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

5 positive · 3 caution
Best for

Utility-scale and commercial.

Not ideal for

Owners who want a long output guarantee and hot climates.

Watch-outs
25 year performance warranty

Bottom 4% of the N-type 600-650 W segment, against a median of 30 yrs. Ranked 9,798th in the whole database.

-0.300 %/°C temperature coefficient

Bottom 11% of the N-type 600-650 W segment, against a median of -0.290.

What owners get
N-type TOPCon cell technology

N-type TOPCon cells deliver a lower degradation rate (0.4% annually after year one per the manufacturer datasheet) and better high-temperature performance than legacy PERC cells, translating into higher annual energy yield across the 25-year service life.

Bifacial design with half-cut cells

Combining bifacial construction with half-cut cells reduces series resistance losses and improves partial-shading tolerance, while also capturing albedo light reflected from the ground — a clear advantage for ground-mount installations and high-reflectivity surfaces.

High efficiency up to 23.08%

Efficiency of 22.01–23.08% places the series near the top of its segment, on par with Runergy's HY-DH156N8 (23.1%) and clearly ahead of Resun Solar's RS9K-M (22.79%) at the same 645 Wp max power.

Tier-1, North American manufacturing

Heliene is a Tier-1 bankable manufacturer with factories in Minnesota, Florida, and Ontario (Canada), and is listed on PVEL's Top Performer list. Unlike Chinese peer comparables (Runergy, Resun Solar), the module qualifies for Buy America/domestic-content programs, a meaningful factor for project financing in the US and Canada.

Reinforced mechanical build

3.2mm tempered glass and a reinforced frame engineered for higher snow and wind loads improve hail resistance and reduce failure risk in harsh climate conditions.

Trade-offs
Shorter product warranty than some N-type peers

The 15-year product warranty trails what some N-type competitors now offer (e.g., 25-year product warranties on Trina Vertex N or JinkoSolar Tiger Neo series), despite matching the industry-standard 25-year linear power warranty. This can affect bankability scoring on long-horizon financed projects.

Notes from the database
  • Efficiency of 22.7% matches the N-type 600-650W median
  • Power density of 227.3 W/m² matches the N-type 600-650W median
  • At -0.30%/°C, hot weather performance is typical for N-type 600-650W panels
  • At 31.0 kg, this panel is 1.5 kg lighter than N-type 600-650W median (32.5 kg) - easier handling during installation
  • Bifaciality factor of 80% can add 4-12% extra yield with reflective mounting surface

Specifications

Open datasheet PDF
Nominal power (Pmax) 635 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 22.73 % Typical Segment median 22.77%
Vmpp · Impp 48.59 V · 13.07 A Operating point at max power
Voc · Isc 57.54 V · 13.79 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 2464×1134×35 mm · 2.79 m² of roof
Weight 31.0 kg Typical Typical · median 32.5 kg
Cells 156 · N-type Monocrystalline
Bifaciality 80 % Rear output as a share of front
Coefficient Pmax -0.300 %/°C Weak bottom 11% of its segment
Coefficient Voc · Isc -0.250 · 0.045 %/°C
NOCT 42 °C At 800 W/m², 20 °C ambient
Product warranty 15 years Hardware defects only
Performance warranty 25 years Weak bottom 4% · median 30 yrs
End-of-warranty output 90.0 % Equals 555 W guaranteed
Degradation 1.00 → 0.40 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by Heliene in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 635 Wp appear here. The rest cover the whole series.

Guaranteed Power Output vs. Year – 25-Year Linear Performance Guarantee (NTYP vs PERC Modules) Guaranteed Power Output vs. Year – 25-Year Linear Performance Guarantee (NTYP vs PERC Modules) Whole series

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.300 %/°C against a segment median of -0.290
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Alternatives

All Heliene panels
Filter these
Size
Panel Power Eff. Temp. Weight Difference
Heliene 156HC-635 M10 NTYP SL 635 W 22.73% -0.300 31.0 kg You are here
AIKO-A650-MAE72Mw 650 W 25.20% -0.260 27.0 kg Lighter, +2.5 pp, +5 yr warranty
AIKO-A680-MDE72Mw 680 W 25.20% -0.260 29.0 kg +45 W, +2.5 pp, +5 yr warranty
AIKO-A675-MDE72Mw 675 W 25.00% -0.260 29.0 kg +40 W, +2.3 pp, +5 yr warranty
AIKO-A645-MAE72Mw 645 W 25.00% -0.260 27.0 kg Lighter, +2.3 pp, +5 yr warranty
AIKO-G670-MCH72Mw 670 W 24.80% -0.260 28.2 kg Cooler, +2.1 pp, +5 yr warranty
LR7-72HVHF-670M 670 W 24.80% -0.260 28.5 kg Cooler, +2.1 pp, +5 yr warranty
AIKO-A640-MAE72Mw 640 W 24.80% -0.260 27.0 kg Lighter, +2.1 pp, +5 yr warranty
156HC M10 SL Bifacial - 565W class 565 W 20.20% -0.340 31.0 kg -70 W, hotter, -2.5 pp
156HC M10 SL Bifacial - 570W class 570 W 20.40% -0.340 31.0 kg -65 W, hotter, -2.3 pp
156HC M10 SL Bifacial - 575W class 575 W 20.60% -0.340 31.0 kg -60 W, hotter, -2.1 pp
156HC M10 SL Bifacial - 580W class 580 W 20.80% -0.340 31.0 kg -55 W, hotter, -1.9 pp
156HC M10 SL Bifacial - 585W class 585 W 20.90% -0.340 31.0 kg -50 W, hotter, -1.8 pp
AIKO-A700-MAE78Dw 700 W 25.00% -0.260 34.5 kg +65 W, +2.3 pp, +5 yr warranty
AIKO-A695-MAE78Dw 695 W 24.90% -0.260 34.5 kg +60 W, +2.2 pp, +5 yr warranty
JKM650-670N-66QL6-BDV (670W class) 670 W 24.80% -0.260 32.5 kg Cooler, +2.1 pp, +5 yr warranty

Found 616 panels of the same or similar size to this one, within ±10 mm. See them here Found 616 panels of the same or similar size to this one, within ±25 mm. See them here Found 616 panels of the same or similar size to this one, within ±50 mm. See them here Found 1813 panels of the same or similar size to this one, within ±100 mm. See them here

Common questions

6 answered
What is the maximum power output of the Heliene 156HC M10 NTYP SL Bifacial panels?
Panels in this series reach a maximum power output of up to 645 Wp. This is achieved through N-type TOPCon half-cut cells combined with a bifacial design that also captures reflected light from the ground surface. As a result, this series delivers higher energy yield per unit of roof or ground area compared to comparable modules built on older PERC technology.
How does N-type TOPCon technology differ from PERC in Heliene panels?
N-type TOPCon cells, used in the 156HC M10 series, feature lower annual degradation and better performance at high temperatures compared to older P-type PERC cells. In practice, this means higher energy production during summer months and a slower decline in panel efficiency over the years, resulting in a better return on investment over the long term.
Are Heliene 156HC M10 bifacial panels worth it on a single-family home roof?
Bifacial construction performs best where the panel can capture light reflected from a bright surface, such as on solar farms, flat roofs with light-colored coverings, or ground covered with gravel or snow. On a typical sloped roof with dark tiles mounted close to the surface, the bifacial gain will be limited, though the panel still retains all the benefits of TOPCon and half-cut technology.
What warranty comes with the Heliene 156HC M10 NTYP SL Bifacial series?
The manufacturer offers a 15-year product warranty and a 25-year linear power output warranty. As a Tier 1 manufacturer headquartered in Canada, Heliene provides stable servicing conditions and predictable module performance throughout the system's lifetime, which matters both for commercial investors and homeowners planning a 20-25 year installation.
Do half-cut cells in Heliene panels improve shading tolerance?
Yes, splitting cells into halves (half-cut) reduces series resistance losses and means partial shading, from a chimney, tree, or neighboring building, has less impact on the panel's overall power output. As a result, an installation using 156HC M10 panels maintains more stable energy production compared to modules built with full, undivided cells.
How thick is the glass on Heliene 156HC M10 panels and are they hail resistant?
The panels feature 3.2 mm tempered glass, providing additional resistance to mechanical damage and hail. Combined with a reinforced frame designed for increased snow and wind loads, the module suits areas with harsher climate conditions as well as large ground-mounted installations that require low failure rates.
Add to compare