Skip to main content
AE Solar AE CME-132-715

AE CME-132-715

715 Wp TOPCon
ComparePV verdict

Light for its output, no clear weak spot

Rank 33 of 14,005
Compare panels Datasheet PDF
Power (Wp)
715
Typical for its class
Efficiency (%)
23.04
Typical · median 23.00%
Density (Wp/m²)
230.4
Typical · median 230.2
Temp (%/°C)
-0.290
Typical · median -0.290
Weight (kg)
31.5
Strong · 6.5 kg below median
Warranty (yrs)
30
Typical · median 30 yrs

The Meteor CME-132 series harnesses the potential of N-type TOPCon cells, which eliminate typical power degradation issues and guarantee higher yields in low-light conditions. The Bifacial Double Glass design makes the panels extremely resistant to mechanical factors and snow loads, while simultaneously capturing additional energy reflected from the ground. This solution effectively addresses the problem of limited installation lifespan in aggressive environments, offering significantly longer durability than standard monofacial modules. The innovative 132-cell architecture optimizes electrical parameters, facilitating compatibility with modern inverters and allowing for the design of more efficient strings. The Meteor CME-132 stands out from the competition with its minimal temperature coefficient, which translates into stable operation in full sun without sudden efficiency drops. Choosing this series is an investment in maximum power density per square meter, which is crucial when roof space is limited. These panels are dedicated to professional solar farms and modern energy-efficient homes, where the priority is reliability and the lowest cost of energy over the system life cycle. Thanks to the reinforced glass-glass structure, the modules exhibit full resistance to ammonia and salt mist, making them an unrivaled solution in harsh industrial conditions.

Ranking

420 panels in the segment TOPCon 700-750 W
Metric This panel Median Position in segment Overall rank
Module efficiency 23.04% 23.00% Typical 1,711
Power density 230.4 230.2 Typical 1,702
Temperature coefficient -0.290 -0.290 Typical 2,165
Weight per kWp 44.1 52.9 Strong · top 3% 371
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

5 positive · 1 caution
Best for

Utility-scale, commercial and hot-climate.

Strengths
44.1 kg per kWp

Top 3% of the TOPCon 700-750 W segment, against a median of 52.9. Ranked 371st in the whole database.

What owners get
Segment efficiency at its peak: 23.21%

The 720 W variant achieves an efficiency of 23.21%, slightly exceeding its direct competitors: Gamko GKA210N132 and Renesola RS9-700~720NBG-E1 (both at 23.18%) and DMEGC DMxxxG12T-B66HSW (23.20%). Given the limited roof space, this difference translates into a significantly higher energy yield without the need to increase the number of modules.

30-year product and performance warranty

AE Solar guarantees over 87% of its rated power after 30 years of operation, supported by both a product warranty and a linear power warranty for the same period. This is one of the longest standard warranty periods in the 700+ Wp module segment, which is important when calculating the LCOE (Levelized Cost of Electricity) for commercial and PV farm installations.

The only European Tier 1 manufacturer of BNEF

AE Solar is the only European manufacturer featured in the BloombergNEF 2024 bankability ranking (16th in a row, confirmed in Q1 2025), and its bankability rating has increased from 26% (2023) to 50% (2024). This makes it easier for European banks to finance projects and meet the requirements of insurers, without needing to accept manufacturers from outside of Europe.

N-type TOPCon: Resistance to LID and Low Temperature Coefficient

The N-type technology eliminates light-induced degradation (LID), which is typical of older PERC cells, providing better performance in cloudy and high-temperature conditions. The double-glass construction, as confirmed in the manufacturer's datasheet, ensures complete resistance to ammonia and saline mist, which extends the actual lifespan of the module in harsh environments (coastal and agricultural areas).

Trade-offs
No bifacial effect

The CME-132 series is monofacial (is_bifacial: false), despite the use of a glass-glass construction. A direct competitor, Gamko New Energy, offers a bifacial variant, the GKA210N132BF, with comparable efficiency of 23.18%. In ground-mounted or flat-roof installations, this results in an additional annual yield of 5–15%. This limits the attractiveness of the CME-132 series in utility-scale projects, where bifaciality is standard.

Notes from the database
  • Efficiency of 23.0% matches the TOPCon 700-750W median
  • Power density of 230.4 W/m² matches the TOPCon 700-750W median
  • Temperature coefficient of -0.29%/°C matches the TOPCon 700-750W median
  • At 31.5 kg, this panel is 6.5 kg lighter than TOPCon 700-750W median (38.0 kg) - easier handling during installation
  • In the top 12% for efficiency among all TOPCon panels

Specifications

Open datasheet PDF
Nominal power (Pmax) 715 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 23.04 % Typical Segment median 23.00%
Vmpp · Impp 41.10 V · 17.40 A Operating point at max power
Voc · Isc 48.90 V · 18.40 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 2383×1302×30 mm · 3.10 m² of roof
Weight 31.5 kg Strong Strong · 6.5 kg below median
Cells 132 · TOPCon Monocrystalline
Coefficient Pmax -0.290 %/°C Typical median -0.290 of its segment
Coefficient Voc · Isc -0.240 · 0.040 %/°C
NOCT 43 °C At 800 W/m², 20 °C ambient
Product warranty 30 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 87.4 % Equals 625 W guaranteed
Degradation 1.00 → 0.40 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by AE Solar in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 715 Wp appear here. The rest cover the whole series.

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.290 %/°C against a segment median of -0.290
-
Filter these
Size
Panel Power Eff. Temp. Weight Difference
AE Solar AE CME-132-715 715 W 23.04% -0.290 31.5 kg You are here
AIKO-A680-MDE72Mw 680 W 25.20% -0.260 29.0 kg -35 W, cooler, +2.2 pp
AIKO-A675-MDE72Mw 675 W 25.00% -0.260 29.0 kg -40 W, cooler, +2.0 pp
AIKO-A700-MAE78Dw 700 W 25.00% -0.260 34.5 kg Cooler, heavier, +2.0 pp
AIKO-A695-MAE78Dw 695 W 24.90% -0.260 34.5 kg Cooler, heavier, +1.9 pp
AIKO-G670-MCH72Mw 670 W 24.80% -0.260 28.2 kg -45 W, lighter, +1.8 pp
LR7-72HVHF-670M 670 W 24.80% -0.260 28.5 kg -45 W, lighter, +1.8 pp
JKM650-670N-66QL6-BDV (670W class) 670 W 24.80% -0.260 32.5 kg -45 W, cooler, +1.8 pp
AE ME-132 640W 640 W 20.63% -0.340 31.5 kg -75 W, hotter, -2.4 pp
AE ME-132 645W 645 W 20.79% -0.340 31.5 kg -70 W, hotter, -2.2 pp
AIKO-A805-GRH78Dw 805 W 25.10% -0.260 39.8 kg +90 W, heavier, +2.1 pp
AIKO-A800-GRH78Dw 800 W 24.90% -0.260 39.8 kg +85 W, heavier, +1.9 pp
AIKO-A795-GRH78Dw 795 W 24.80% -0.260 39.8 kg +80 W, heavier, +1.8 pp
AIKO-A790-GRH78Dw 790 W 24.60% -0.260 39.8 kg +75 W, heavier, +1.6 pp
TSM-NEG21C.20Q-760 760 W 24.50% -0.260 38.3 kg +45 W, heavier, +1.5 pp
AIKO-A785-GRH78Dw 785 W 24.40% -0.260 39.8 kg +70 W, heavier, +1.4 pp
GK-4-78HGBD-780M 780 W 24.30% -0.260 38.7 kg +65 W, heavier, +1.3 pp

Found 1390 panels of the same or similar size to this one, within ±10 mm. See them here Found 1400 panels of the same or similar size to this one, within ±25 mm. See them here Found 1400 panels of the same or similar size to this one, within ±50 mm. See them here Found 1432 panels of the same or similar size to this one, within ±100 mm. See them here

Common questions

6 answered
What is the warranty on AE Solar Meteor CME-132 solar panels?
AE Solar offers up to 30 years of product warranty and 30 years of performance warranty for the Meteor CME-132 series. This means that the manufacturer guarantees both the physical integrity of the module and the consistent energy output for three decades. This is one of the longest warranties available on the market, comparable to those offered by other Tier 1 manufacturers.
Do AE Solar Meteor CME-132 solar panels perform well in cloudy and low-light conditions?
Yes. The N-type TOPCon cell technology used in the Meteor CME-132 series offers significantly improved performance under low sunlight conditions compared to older PERC cells. Due to its higher bifaciality and lower carrier recombination rate, the panels produce more energy on cloudy days and in the early morning or late evening, which has a real impact on the annual energy yield in the Polish climate.
What distinguishes the double-glass construction of the Meteor CME-132 from standard panels with a rear foil layer?
In the Meteor CME-132 series, instead of the traditional backsheet, a glass back was used. This glass-to-glass construction is resistant to ammonia, saline mist, and humidity, making the modules suitable for installations in agricultural facilities, near coastal areas, or in aggressive industrial environments. Furthermore, the glass does not degrade like a sheet, which extends the actual lifespan of the panel to over 30 years.
Is the Meteor CME-132, with a power output of 720 Wp, suitable for a small residential rooftop?
720 Wp modules are large-format modules primarily designed for solar farms and large commercial installations. Their size and weight may pose challenges for installation on an average residential roof, limiting the number of possible configurations. However, with limited roof space, the high power density of the CME-132 series is an advantage, allowing for the generation of more kilowatts from a smaller number of modules.
How does the low temperature coefficient of the Meteor CME-132 panels translate into summer performance?
N-type TOPCon cells have a power temperature coefficient of approximately -0.30%/°C, which is better than typical PERC cells (-0.35%/°C). In practice, this means that when the module temperature on a sunny summer day reaches 65-70°C, the Meteor CME-132 series loses less power than a PERC panel with the same nominal power output. Stable performance in hot weather translates to a real increase in kilowatt-hours during peak season.
Is AE Solar a reputable manufacturer, and does the Meteor CME-132 have certifications?
AE Solar is a German-based manufacturer, classified by Bloomberg NEF as Tier 1, which indicates its financial and operational credibility, confirmed by independent analysts. The Meteor CME-132 series has IEC 61215 and IEC 61730 certifications. Production takes place in modern facilities with ISO 9001 certification, and the modules have undergone tests for mechanical load resistance, salt fog resistance, and ammonia resistance, according to IEC standards.
Add to compare