Light for its output, modest efficiency
The AE Solar AURORA ME-132 series are monofacial modules designed for high energy production where predictability and stable performance in real-world conditions are key. The use of P-type PERC cells allows for efficient utilization of solar radiation even under less-than-ideal conditions, which is important in the Polish climate and with occasional cloud cover. The design, based on a modern cell layout and refined laminate, provides improved tolerance to partial shading - a practical solution for roofs with obstructions, chimneys, or neighboring buildings. These modules are designed for durability and resilience in typical commercial applications and larger installations, where consistent performance over time is essential. The AURORA ME-132 also stands out for its focus on quality and degradation control, which translates to more reliable energy production over the course of a year. It is a good choice for PV farms, warehouses, and industrial facilities, as well as projects where consistent results are the priority, rather than compromises in materials.
Ranking
Signals from the data
Commercial, utility-scale and shaded-installations.
Tight roof space and roofs where every square metre has to count.
Top 10% of the PERC 600-650 W segment, against a median of 55.7. Ranked 2,805th in the whole database.
Bottom 5% of the PERC 600-650 W segment, against a median of 21.38%. Ranked 11,057th in the whole database.
Bottom 5% of the PERC 600-650 W segment, against a median of 213.8. Ranked 11,057th in the whole database.
AE Solar offers a full 30-year warranty on both the product and its performance – a standard significantly exceeding the typical 25-year warranties offered by many Tier 1 competitors. For projects involving PV farms and commercial properties with long-term investment horizons, this translates to reduced residual risk and improved project bankability.
AE Solar has been included in the BloombergNEF Tier 1 Global Solar Module Manufacturer list for the 16th time (Q1 2025), meeting the stricter criteria of 10 MW in non-recourse-funded projects from 6 independent banks. This status directly translates to greater access to financing for PV projects in Poland and the EU, without requiring additional security.
Research from 2025 (ScienceDirect) indicates that PERC modules, after 1000 hours of damp-heat testing, lose only 1–2% of their power, while TOPCon modules – which are the most common in this series – experience losses ranging from 4% to as high as 65%. In a climate with higher relative humidity, PERC therefore demonstrates better long-term stability compared to the newer N-type technology.
The range of 20.63–21.27% represents the upper limit of performance achievable with P-type PERC technology in a 132-cell half-cut configuration, as confirmed by the Ver24.5.1 datasheet. For commercial and PV farm installations, where consistency of parameters across the entire batch is crucial, the series offers a narrow variation in efficiency (0.64 pp).
The datasheet confirms resistance to ammonia, saline mists, sand, and dust – important certifications for installation in agricultural, port, and industrial facilities. The manufacturer, with 20 years of experience (founded in 2003, HQ in Germany) and a proven presence in the European market, provides an additional guarantee of service availability.
Longi Hi-MO 9 and Canadian Solar TOPBiHiKu6 achieve 24.4% efficiency, while Sunpro TOPCon reaches 23.32%. In contrast, AURORA ME-132 achieves 20.63–21.27% efficiency. The difference of approximately 3% means that, with the same roof/ground area, the competition will produce about 12–18% more energy – a significant advantage in projects with limited space.
The P-type PERC technology exhibits a first-year degradation rate of approximately 2% (LID) compared to the ~1% for N-type TOPCon used by all three comparable products in this series. Over a 30-year lifespan, the difference in cumulative energy production could be 2–4% in favor of TOPCon modules – a significant cost advantage for large-scale projects.
The Sunpro TOPCon 210 and Canadian Solar TOPBiHiKu6 are bifacial modules, and when installed with a reflective surface (albedo of 0.2–0.3 on ground-mounted farms), they generate an additional 5–15% of energy. The AURORA ME-132, as a monofacial module, does not utilize this effect, making it less competitive in the segment of large-scale ground-mounted PV farms.
- At 20.6% efficiency, this panel is 0.8pp below the PERC 600-650W median of 21.4%
- 206.3 W/m² power density is 7.5 W/m² below PERC 600-650W median (213.8 W/m²) - requires larger installation area
- Temperature coefficient of -0.34%/°C matches the PERC 600-650W median
- At 31.5 kg, this panel is 2.5 kg lighter than PERC 600-650W median (34.0 kg) - easier handling during installation
- In the top 79% for efficiency among all PERC panels
Specifications
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Found 1390 panels of the same or similar size to this one, within ±10 mm. See them here Found 1400 panels of the same or similar size to this one, within ±25 mm. See them here Found 1400 panels of the same or similar size to this one, within ±50 mm. See them here Found 1432 panels of the same or similar size to this one, within ±100 mm. See them here