Skip to main content

WINAICO WST-660BKX72-A3

660 Wp Back Contact Bifacial 70%
ComparePV verdict

Solid all-round for its segment

Rank 592 of 14,354
Compare panels Datasheet PDF
Power (Wp)
660
Typical for its class
Efficiency (%)
24.40
Typical · median 24.40%
Density (Wp/m²)
244.3
Typical · median 244.3
Temp (%/°C)
-0.260
Typical · median -0.260
Weight (kg)
31.9
Typical · median 32.5 kg
Warranty (yrs)
30
Typical · median 30 yrs

The WST-BKX72-A3 WBC Back Contact series is a utility-class module built for large-scale installations where maximum power per panel and lower BoS costs matter most. Its back contact technology removes visible front-side grid lines and ribbons, letting the N-type monocrystalline cells capture more light while giving the panel a uniform, aesthetic surface without the shading losses typically caused by busbars. A bifacial cell design also captures light reflected off the ground, boosting energy yield in ground-mount arrays and installations over bright, reflective surfaces. The glass-glass construction delivers high mechanical durability and limits long-term degradation, supporting stable energy output over decades of operation. The series also stands out with a very low power temperature coefficient, an advantage in hot climates and high-irradiance conditions. Backed by a long-term linear performance warranty, it is a compelling choice for solar farm investors and large commercial projects seeking reliability, high unit power, and a modern design without technical compromises.

Ranking

99 panels in the segment Back Contact 650-700 W
Metric This panel Median Position in segment Overall rank
Module efficiency 24.40% 24.40% Typical 138
Power density 244.3 244.3 Typical 125
Temperature coefficient -0.260 -0.260 Typical 521
Weight per kWp 48.3 49.6 Typical 2,228
Performance warranty 30 yrs 30 yrs Typical 31
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

5 positive · 2 caution
Best for

Utility-scale and commercial.

What owners get
Highest efficiency in the utility segment

Efficiency of 24.1-25% clearly outperforms comparable 675 Wp utility-scale modules from Neo Solar Power, BYD, and Q-Cells, which reach around 21.7-21.73%. This translates into a smaller installation footprint per MW and lower BoS costs.

Back Contact technology without busbars

The absence of visible grids and ribbons on the front allows N-type monocrystalline cells to capture more light and eliminates busbar shading losses - a feature still rare in the utility segment, which is dominated by conventional half-cut PERC/TOPCon modules.

Bifacial cells in glass-glass construction

Bifacial cells in a glass-glass layout increase energy yield by capturing albedo reflected from the ground, while the construction itself limits mechanical damage and degradation over time compared to standard glass-foil modules.

30-year linear power warranty

A long-term linear power warranty (30 years) is a key argument for PV park investors modeling LCOE over the full project lifetime.

Tier-1 manufacturer with 20+ years of track record

WINAICO, founded in 2003 in Taiwan, holds Tier-1 bankable status, easing project financing and reducing risk for institutional investors.

Trade-offs
15-year product warranty is standard, not premium

Given the module's high efficiency, a product warranty limited to 15 years is noticeably shorter than that of some Tier-1 peers (e.g., BYD, Q-Cells), who have recently moved to 20-25 year product warranty standards - potentially a weaker point in an otherwise premium offering.

Limited field track record for utility-scale Back Contact

WINAICO only introduced Back Contact technology in 2025, initially in the residential segment (480-500 Wp modules per pv-magazine). The 650-675 Wp utility version is therefore a newer product without an extensive operating history in large ground-mounted installations, adding uncertainty around real-world durability and failure rates.

Notes from the database
  • Efficiency of 24.4% matches the Back Contact 650-700W median
  • Power density of 244.3 W/m² matches the Back Contact 650-700W median
  • At -0.26%/°C, hot weather performance is typical for Back Contact 650-700W panels
  • 70% bifaciality enables rear-side power generation, boosting yield by 4-10% on reflective surfaces
  • Ranked #138 out of 14354 panels for efficiency in the database

Specifications

Open datasheet PDF
Nominal power (Pmax) 660 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 24.40 % Typical Segment median 24.40%
Vmpp · Impp 45.19 V · 14.61 A Operating point at max power
Voc · Isc 54.20 V · 15.38 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 2382×1134×30 mm · 2.70 m² of roof
Weight 31.9 kg Typical Typical · median 32.5 kg
Cells 144 · Back Contact Monocrystalline
Bifaciality 70 % Rear output as a share of front
Coefficient Pmax -0.260 %/°C Typical median -0.260 of its segment
Coefficient Voc · Isc -0.220 · 0.050 %/°C
NOCT 45 °C At 800 W/m², 20 °C ambient
Product warranty 15 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 88.8 % Equals 586 W guaranteed
Degradation 1.00 → 0.35 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by WINAICO in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 660 Wp appear here. The rest cover the whole series.

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.260 %/°C against a segment median of -0.260
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Filter these
Size
Panel Power Eff. Temp. Weight Difference
WINAICO WST-660BKX72-A3 660 W 24.40% -0.260 31.9 kg You are here
AIKO-A650-MAE72Mw 650 W 25.20% -0.260 27.0 kg -10 W, lighter, +0.8 pp
AIKO-A680-MDE72Mw 680 W 25.20% -0.260 29.0 kg +20 W, lighter, +0.8 pp
AIKO-A675-MDE72Mw 675 W 25.00% -0.260 29.0 kg +15 W, lighter, +0.6 pp
AIKO-A645-MAE72Mw 645 W 25.00% -0.260 27.0 kg -15 W, lighter, +0.6 pp
AIKO-A700-MAE78Dw 700 W 25.00% -0.260 34.5 kg +40 W, heavier, +0.6 pp
WST-675BKX72-A2 675 W 25.00% -0.260 32.1 kg +15 W, +0.6 pp
AIKO-A695-MAE78Dw 695 W 24.90% -0.260 34.5 kg +35 W, heavier, +0.5 pp
WST-625NHX66-A4 625 W 23.10% -0.240 32.6 kg -35 W, cooler, -1.3 pp
WST-630NHX66-A4 630 W 23.30% -0.240 32.6 kg -30 W, cooler, -1.1 pp
WST-650BKX72-A3 650 W 24.10% -0.260 31.9 kg -10 W, -0.3 pp
WST-655BKX72-A3 655 W 24.20% -0.260 31.9 kg Very close match
WST-665BKX72-A2 665 W 24.60% -0.260 32.1 kg +0.2 pp
WST-670BKX72-A2 670 W 24.80% -0.260 32.1 kg +10 W, +0.4 pp
AIKO-G670-MCH72Mw 670 W 24.80% -0.260 28.2 kg +10 W, lighter, +0.4 pp
LR7-72HVHF-670M 670 W 24.80% -0.260 28.5 kg +10 W, lighter, +0.4 pp

Found 1161 panels of the same or similar size to this one, within ±10 mm. See them here Found 1167 panels of the same or similar size to this one, within ±25 mm. See them here Found 1278 panels of the same or similar size to this one, within ±50 mm. See them here Found 1970 panels of the same or similar size to this one, within ±100 mm. See them here

About the WST-BKX72-A3 WBC Back Contact Series series

6 answered

These answers cover the whole series. Where a figure differs, the specification above is this module's own.

What is back contact technology in the WINAICO WST-BKX72-A3 panels, and how does it differ from conventional busbar modules?
Back contact means all electrical connections of the cell are located on its rear side instead of the front, unlike conventional modules with visible busbars and ribbons. This allows the entire surface of the N-type monocrystalline cell to capture light without shading losses from busbars, resulting in higher per-module power output and a uniform, aesthetic appearance with no visible metallization strips.
Are the WST-BKX72-A3 WBC panels bifacial, and is it worth installing them in ground-mount systems?
Yes, the series uses bifacial cells that also generate energy from light reflected off the ground. This makes it particularly well suited for ground-mounted installations and rooftops with light-colored, reflective surfaces, where the additional rear-side gain can meaningfully increase annual energy yield compared to monofacial modules.
What is the maximum power rating of the WINAICO WST-BKX72-A3 panel, and what installations is it suited for?
The module reaches up to 675 Wp of maximum power, placing it among high power-density utility-class modules. Due to its high unit power and design aimed at reducing BoS costs, the panel is primarily recommended for solar farms and large commercial or industrial installations rather than typical small residential systems.
What warranty applies to the WST-BKX72-A3 WBC series panels?
WINAICO offers a 15-year product warranty and a 30-year linear power output warranty. This means the manufacturer guarantees a stable, predictable decline in module performance over three decades, which is an important factor when calculating return on investment for large-scale PV projects.
Does the glass-glass construction of WINAICO back contact panels affect their durability and resistance to damage?
Yes, the glass-glass design replaces the standard rear backsheet with an additional glass layer, increasing mechanical rigidity and improving resistance to moisture, microcracks, and laminate degradation over time. Combined with back contact technology and a low power temperature coefficient, the panel maintains stable energy production even in hot climates and under high irradiance.
Is WINAICO, as the manufacturer of the WST-BKX72-A3, a reliable supplier for large PV investments?
WINAICO is a Taiwan-based manufacturer with Tier 1 status, meaning its modules are recognized as bankable by financing institutions for large solar projects. Combined with the long-term linear power warranty and the use of advanced back contact and bifacial cell technology, the WST-BKX72-A3 series is a solid choice for solar farm investors seeking reliability and high unit power.
Add to compare