Middle of its segment, heavy for its output
The HY-DH132N11 Pro series represents Runergy's flagship modules, engineered for utility-scale ground-mount projects and large industrial or commercial installations. At their core are N-type TOPCon cells in a half-cut architecture, arranged in a 132-cell configuration that reduces resistive losses and delivers more stable performance under partial shading. The panel features bifacial technology in a dual-glass construction, allowing it to harvest additional energy from the rear side through light reflected off the ground or mounting surface. This meaningfully boosts total energy yield from the same rooftop or land footprint, driving down the levelized cost of energy (LCOE) over the full lifetime of the system. The Pro series also stands out for its low temperature coefficient, meaning less performance loss during hot weather, along with a rugged build designed to withstand mechanical loads and the variable climate conditions typical of Poland. This makes it a strong fit for solar farm investors, industrial project developers, and owners of large warehouse rooftops seeking high power density and predictable returns over decades of operation.
Ranking
Signals from the data
Utility-scale, commercial and shaded-installations.
Weight-limited structures.
Bottom 1% of the N-type 600-650 W segment, against a median of 52.8. Ranked 13,551st in the whole database.
132 half-cut cells in N-type TOPCon architecture deliver lower resistive losses and more stable performance under partial shading than older PERC modules, translating into higher annual energy yield for large ground-mount installations.
The dual-glass bifacial design captures additional energy from reflected irradiance on the rear side, increasing total output per unit of roof or ground area and lowering LCOE over the full project lifecycle.
Efficiency of 22.2-22.8% exceeds comparable 615 Wp modules from GCL-M12/60H (21.7%) and Risen TITAN (21.7%), delivering higher power density on the same installation footprint.
The manufacturer guarantees roughly 87.4% of nominal power retained after 30 years, matching the current Tier-1 market standard of a 25-30 year linear warranty and supporting predictable ROI on long-term projects.
Runergy (founded in 2013) has appeared on BloombergNEF's Tier 1 PV Module Manufacturer list, supporting bank financing for large utility-scale and industrial projects built on this series.
The product warranty is 12 years, while in 2026 some flagship TOPCon competitors (e.g. Trina Vertex N+) now standardly offer 15 years - a gap that may matter for long-term service agreements on large installations.
Peak efficiency of 22.8% is slightly below the comparable JA Solar JAM72D40 LB (23.2%) at the same 615 Wp power class, which can translate into marginally lower yield on constrained mounting area.
- At 22.6% efficiency, this panel is on par with typical N-type 600-650W modules
- Power density of 225.8 W/m² matches the N-type 600-650W median
- At -0.29%/°C, hot weather performance is typical for N-type 600-650W panels
- At 41.0 kg, this panel is 8.2 kg heavier than the N-type 600-650W median (32.8 kg) - more demanding for installation crews
- Bifacial design (80% factor) captures reflected light - adds 4-12% yield on ground-mount or white roof
Specifications
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.
Found 1161 panels of the same or similar size to this one, within ±10 mm. See them here Found 1167 panels of the same or similar size to this one, within ±25 mm. See them here Found 1278 panels of the same or similar size to this one, within ±50 mm. See them here Found 1970 panels of the same or similar size to this one, within ±100 mm. See them here
About the HY-DH132N11 Pro series
These answers cover the whole series. Where a figure differs, the specification above is this module's own.