Middle of its segment, weak in heat
The RS9H-M-DG series is a bifacial dual-glass photovoltaic module designed for projects where every extra kilowatt-hour of yield matters. The panel is built on N-type TOPCon cells with multi-busbar (MBB) technology, which reduces internal power loss and boosts conversion efficiency compared to conventional PERC designs. The half-cell construction further lowers the risk of failures caused by microcracks and busbar breakage, while effectively mitigating hot-spot issues triggered by partial shading. Thanks to its bifacial dual-glass design, the module captures irradiance from both sides, delivering higher energy yield, especially in ground-mount installations over reflective surfaces. The panel also stands out for its high mechanical load resistance, certified for wind loads up to 2400 Pa and snow loads up to 5400 Pa, and it withstands salt mist and ammonia exposure, making it a solid choice for coastal and agricultural installations. Anti-PID performance combined with low annual power degradation ensures stable energy output throughout the module's service life, backed by a 30-year linear power warranty. This makes the series a strong fit for investors seeking high reliability and reduced LCOE in commercial and industrial-scale projects.
Ranking
Signals from the data
Utility-scale, commercial and agrivoltaic.
Hot climates.
Bottom 22% of the TOPCon 700-750 W segment, against a median of -0.290.
N-type TOPCon cells with multi-busbar (MBB) technology reduce internal resistive losses and deliver higher conversion efficiency than conventional PERC modules, along with lower first-year LID degradation.
The module captures irradiance from both sides thanks to tempered double glass, which can boost energy yield by several to low-double-digit percentage points versus monofacial panels of the same power rating in ground-mount installations over bright surfaces (e.g., gravel, white roofing).
The power warranty runs 30 years, exceeding the 25-year standard offered by many TOPCon competitors, which translates into a lower projected LCOE for long-term commercial projects.
Certified for wind loads up to 2400 Pa and snow loads up to 5400 Pa, combined with salt-mist and ammonia resistance, making the module well suited for coastal and agricultural (agri-PV) installations where standard glass-foil modules degrade faster.
Maximum efficiency of 23.18% is on par with the Leapton LP210*210-M-66-NH (23.18%) and only marginally below GCL-NH12/66GDF and DMEGC DMxxxG12T-B66HSW (23.2%), confirming the series sits at the technological forefront of the 720 Wp segment.
The top-end efficiency of 23.18% is 0.02 pp lower than GCL and DMEGC (23.2%). The gap is negligible in real-world operation but could factor into tender comparisons on very large commercial projects.
Unlike established brands such as Trina, JinkoSolar, or LONGi, Resun Solar does not clearly appear on current BNEF Tier 1 lists (Q2/Q3 2026), which may complicate non-recourse bank financing for large commercial projects and requires individual bankability verification before investment.
- Efficiency of 23.2% matches the TOPCon 700-750W median
- Power density of 231.8 W/m² matches the TOPCon 700-750W median
- Temperature coefficient of -0.30%/°C matches the TOPCon 700-750W median
- In the top 11% for efficiency among all TOPCon panels
Specifications
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Alternatives
Found 1393 panels of the same or similar size to this one, within ±10 mm. See them here Found 1403 panels of the same or similar size to this one, within ±25 mm. See them here Found 1403 panels of the same or similar size to this one, within ±50 mm. See them here Found 1435 panels of the same or similar size to this one, within ±100 mm. See them here
About the RS9H-M-DG series
These answers cover the whole series. Where a figure differs, the specification above is this module's own.