Middle of its segment, weak in heat
The RS9H-M TOPCON series is built for installers and investors looking for modules that combine high efficiency with real resilience in demanding operating conditions. The panel is based on N-type TOPCon technology paired with half-cut cells and a multi-busbar grid, which reduces internal power losses and lowers the risk of damage from micro-cracks or broken busbars. Thanks to 3.2mm tempered glass with enhanced transmittance and anti-reflective properties, the series maintains stable energy output even under diffuse, low-light conditions, translating into higher yield on cloudy days or during early morning and dusk hours. The design stands out for its high mechanical strength, certified for wind and snow load, making it a solid fit both for roofs exposed to strong gusts and for regions with heavy snowfall. The panels also show strong PID resistance along with resistance to salt mist and ammonia exposure, making them a good choice for coastal and agricultural installations. The whole package is backed by a 30-year linear power warranty with low annual degradation, giving investors a predictable return and a lower LCOE over the system's lifetime.
Ranking
Signals from the data
Utility-scale, commercial and cold-climate.
Hot climates.
Bottom 22% of the TOPCon 700-750 W segment, against a median of -0.290.
The combination of N-type TOPCon cells with half-cut design and a multi-busbar grid reduces internal module losses and lowers the risk of damage from microcracks or interrupted busbars, translating into more stable power output over the module's lifetime.
3.2 mm tempered glass with enhanced transmittance and anti-reflective coating maintains stable energy production under diffuse, low-light conditions - a real yield benefit during early morning, dusk, and cloudy days.
The module holds certifications for wind and snow load, making it suitable for roofs exposed to strong gusts as well as regions with heavy snowfall, without added failure risk.
The RS9H-M TOPCon series is resistant to PID degradation as well as salt mist and ammonia exposure, making it a solid choice for coastal and agricultural installations where standard modules degrade faster.
Low annual power degradation backed by a 30-year linear warranty gives investors predictable ROI and a lower lifetime LCOE compared to series offering only a 25-year power warranty.
The RS9H-M TOPCon series is monofacial only, while the comparable Astronergy ASTRO N8 (CHSM66N(DG)/F-BH) at the same 735 Wp power and 23.7% efficiency is bifacial, giving the competing model an additional energy gain from reflected rear-side irradiance that is unavailable in this series.
- At 23.2% efficiency, this panel is on par with typical TOPCon 700-750W modules
- Power density of 231.8 W/m² matches the TOPCon 700-750W median
- At -0.30%/°C, hot weather performance is typical for TOPCon 700-750W panels
- #1539 for efficiency, #6298 for temperature performance out of 14354 panels
Specifications
Datasheet charts
Measured curves published by Resun Solar in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 720 Wp appear here. The rest cover the whole series.
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Alternatives
Found 1393 panels of the same or similar size to this one, within ±10 mm. See them here Found 1403 panels of the same or similar size to this one, within ±25 mm. See them here Found 1403 panels of the same or similar size to this one, within ±50 mm. See them here Found 1435 panels of the same or similar size to this one, within ±100 mm. See them here
About the RS9H-M TOPCON series
These answers cover the whole series. Where a figure differs, the specification above is this module's own.