Skip to main content
Renew Photovoltaics RPS2MH72BD585
Renew Photovoltaics Brand review

RPS2MH72BD585

585 Wp TOPCon Bifacial 80%
ComparePV verdict

Solid all-round for its segment

Rank 4,144 of 14,005
Compare panels Datasheet PDF
Power (Wp)
585
Typical for its class
Efficiency (%)
22.65
Typical · median 22.44%
Density (Wp/m²)
226.5
Typical · median 224.4
Temp (%/°C)
-0.300
Typical · median -0.290
Weight (kg)
32.5
Typical · median 31.2 kg
Warranty (yrs)
30
Typical · median 30 yrs

The M10 Cells TOPCon Module series from ReNew consists of bifacial N-type panels engineered for installations that demand both high output and resilience under demanding operating conditions. The panel uses M10 half-cut cells and 16 busbars, which reduces the impact of micro-cracks on performance and enables stable operation even under partial shading. Smart soldering combined with zero LID technology results in a low first-year power drop, while the module's construction has been tested for resistance to wind and snow loads, making it a solid choice for installations exposed to extreme weather. Thanks to a bifaciality factor of up to 80%, the panel also captures light reflected off the ground, boosting energy yield without increasing the installation footprint. A low temperature coefficient and strong performance under weak light conditions keep output stable both in hot climates and on overcast days. The series is aimed at commercial and industrial investors who expect durability, predictable yield, and a 30-year power warranty backed by quality certifications and Tier 1 status.

Ranking

1,018 panels in the segment TOPCon 550-600 W
Metric This panel Median Position in segment Overall rank
Module efficiency 22.65% 22.44% Typical 3,522
Power density 226.5 224.4 Typical 3,500
Temperature coefficient -0.300 -0.290 Typical 6,093
Weight per kWp 55.6 53.8 Typical 9,909
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

5 positive · 1 caution
Best for

Utility-scale and commercial.

What owners get
Bifacial N-type TOPCon cells

N-type TOPCon technology delivers a lower LID degradation rate (around 1% in the first year) and better high-temperature performance than legacy PERC cells, translating into higher real-world annual yield in hot climates.

Bifaciality factor up to 80%

The module captures reflected ground-albedo light thanks to a bifaciality factor of up to 80%, boosting energy production without increasing the installed footprint — a key advantage for commercial and industrial projects with limited roof or land area.

30-year linear power warranty

The 30-year power warranty aligns with the current premium standard for tier-1 TOPCon modules in the 2026 market, giving investors predictable, long-term energy yield backed by quality certifications.

High mechanical load resistance

The module is tested for wind loads up to 2400 Pa and snow loads up to 5400 Pa, making it a strong choice for installations in regions with extreme weather conditions, including areas with heavy snowfall.

Half-cut design with 16 busbars

M10 half-cut cells combined with 16 busbars limit the impact of micro-cracks on performance and improve stability under partial shading, reducing the risk of localized power loss in real-world operating conditions.

Trade-offs
Product warranty trails premium trend

The 12-year product warranty is now the baseline for the TOPCon segment — some tier-1 competitors (e.g., Risen Energy) already offer 15-year product warranties alongside the same 30-year power warranty, which may make ReNew's offering less competitive for buyers seeking maximum coverage.

Notes from the database
  • At 22.6% efficiency, this panel is on par with typical TOPCon 550-600W modules
  • Power density of 226.5 W/m² matches the TOPCon 550-600W median
  • At -0.30%/°C, hot weather performance is typical for TOPCon 550-600W panels
  • At 32.5 kg, this panel is 1.3 kg heavier than the TOPCon 550-600W median (31.2 kg) - more demanding for installation crews
  • Bifaciality factor of 80% can add 4-12% extra yield with reflective mounting surface

Specifications

Open datasheet PDF
Nominal power (Pmax) 585 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 22.65 % Typical Segment median 22.44%
Vmpp · Impp 44.97 V · 13.01 A Operating point at max power
Voc · Isc 53.00 V · 13.62 A Sizes the string length
Dimensions 2278×1134×30 mm · 2.58 m² of roof
Weight 32.5 kg Typical Typical · median 31.2 kg
Cells 144 · TOPCon Monocrystalline
Bifaciality 80 % Rear output as a share of front
Coefficient Pmax -0.300 %/°C Typical median -0.290 of its segment
Coefficient Voc · Isc -0.240 · 0.040 %/°C
NOCT 45 °C At 800 W/m², 20 °C ambient
Product warranty 12 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 87.4 % Equals 511 W guaranteed
Degradation 1.00 → 0.40 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by Renew Photovoltaics in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 585 Wp appear here. The rest cover the whole series.

IV Curve IV Curve Whole series PV Curve PV Curve Whole series

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.300 %/°C against a segment median of -0.290
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Filter these
Size
Panel Power Eff. Temp. Weight Difference
Renew Photovoltaics RPS2MH72BD585 585 W 22.65% -0.300 32.5 kg You are here
LR7-60HVH-560M 560 W 24.80% -0.260 25.0 kg Cooler, lighter, +2.2 pp
LR7-60HVH-555M 555 W 24.60% -0.260 25.0 kg Cooler, lighter, +2.0 pp
AIKO-A635-MAE72Mw 635 W 24.60% -0.260 27.0 kg +50 W, lighter, +2.0 pp
AIKO-A630-MAH72Dw 630 W 24.40% -0.260 32.5 kg +45 W, cooler, +1.8 pp
LR7-60HVHL-550M 550 W 24.40% -0.260 16.3 kg Cooler, 16 kg lighter, +1.8 pp
RPS2MH72BD530 530 W 20.52% -0.320 32.5 kg -55 W, hotter, -2.1 pp
RPS2MH72BD535 535 W 20.71% -0.320 32.5 kg -50 W, hotter, -1.9 pp
RPS2MH72BD540 540 W 20.90% -0.320 32.5 kg -45 W, hotter, -1.8 pp
RPS2MH72BD545 545 W 21.10% -0.320 32.5 kg -40 W, hotter, -1.5 pp
RPS2MH72BD550 550 W 21.29% -0.320 32.5 kg -35 W, hotter, -1.4 pp
RPS2MH72BD555 555 W 21.48% -0.320 32.5 kg -30 W, hotter, -1.2 pp
RPS2MH72BD560 560 W 21.68% -0.320 32.5 kg -25 W, hotter, -1.0 pp
RPS2MH72BD570 570 W 22.07% -0.300 32.5 kg -15 W, -0.6 pp
RPS2MH72BD575 575 W 22.26% -0.300 32.5 kg -10 W, -0.4 pp
RPS2MH72BD580 580 W 22.45% -0.300 32.5 kg Very close match
AIKO-A650-MAE72Mw 650 W 25.20% -0.260 27.0 kg +65 W, lighter, +2.6 pp

Found 2326 panels of the same or similar size to this one, within ±10 mm. See them here Found 2368 panels of the same or similar size to this one, within ±25 mm. See them here Found 2382 panels of the same or similar size to this one, within ±50 mm. See them here Found 2547 panels of the same or similar size to this one, within ±100 mm. See them here

Common questions

6 answered
What is the maximum power output of the ReNew M10 Cells TOPCon Module?
The module reaches a maximum power output of up to 590 Wp. This is achieved through N-type TOPCon cells combined with half-cut cell technology and 16 busbars, which reduce power losses from microcracks and partial shading. Higher unit power means fewer modules are needed for the same output, which matters for commercial and industrial installations with limited roof or ground space.
How does TOPCon cell technology differ from standard PERC cells?
The N-type TOPCon cells used in the M10 series show lower power degradation over time and better high-temperature performance than conventional P-type PERC cells. An additional passivation layer in the TOPCon structure reduces charge carrier recombination, resulting in higher module efficiency and more stable energy yield throughout the module's lifetime, especially in hot climates.
What does the bifacial design of the M10 modules offer, and is it worth the extra cost?
The double-sided construction, with a bifaciality factor of up to 80%, allows the module to capture light reflected from the surface below, such as a light-colored roof, gravel, or snow, generating additional energy without increasing the installation's footprint. Actual gains depend on ground albedo and mounting method, but with proper racking, bifacial gain can meaningfully boost annual energy yield by several percentage points.
What warranty applies to the M10 Cells TOPCon Module series?
ReNew Photovoltaics provides a 12-year product warranty and a 30-year linear power warranty. This means the module is guaranteed to retain a specified percentage of its initial power output after 30 years of operation, backed by quality certifications and Tier 1 manufacturer status, ensuring predictable long-term returns for commercial and industrial projects.
Are M10 modules suitable for installations exposed to heavy wind and snow loads?
Yes, the module's design has been tested for resistance to wind and snow loads, making it a suitable choice for commercial and industrial sites in regions with harsh weather conditions. Combined with zero LID technology and low first-year power degradation, the panel maintains stable performance even under fluctuating mechanical stress.
Do M10 panels lose efficiency in hot weather or low-light conditions?
Not significantly. The low temperature coefficient of the TOPCon cells limits power loss in high ambient temperatures, while good low-irradiance performance allows the module to keep generating energy on cloudy days. As a result, installations using this module maintain a more stable and predictable energy yield across varying climate conditions throughout the year.
Add to compare