Middle of its segment, heavy for its output
The M10 Cells TOPCon Module series from ReNew consists of bifacial N-type panels engineered for installations that demand both high output and resilience under demanding operating conditions. The panel uses M10 half-cut cells and 16 busbars, which reduces the impact of micro-cracks on performance and enables stable operation even under partial shading. Smart soldering combined with zero LID technology results in a low first-year power drop, while the module's construction has been tested for resistance to wind and snow loads, making it a solid choice for installations exposed to extreme weather. Thanks to a bifaciality factor of up to 80%, the panel also captures light reflected off the ground, boosting energy yield without increasing the installation footprint. A low temperature coefficient and strong performance under weak light conditions keep output stable both in hot climates and on overcast days. The series is aimed at commercial and industrial investors who expect durability, predictable yield, and a 30-year power warranty backed by quality certifications and Tier 1 status.
Ranking
Signals from the data
Utility-scale and commercial.
Weight-limited structures.
Bottom 11% of the TOPCon 550-600 W segment, against a median of 53.8.
N-type TOPCon technology delivers a lower LID degradation rate (around 1% in the first year) and better high-temperature performance than legacy PERC cells, translating into higher real-world annual yield in hot climates.
The module captures reflected ground-albedo light thanks to a bifaciality factor of up to 80%, boosting energy production without increasing the installed footprint — a key advantage for commercial and industrial projects with limited roof or land area.
The 30-year power warranty aligns with the current premium standard for tier-1 TOPCon modules in the 2026 market, giving investors predictable, long-term energy yield backed by quality certifications.
The module is tested for wind loads up to 2400 Pa and snow loads up to 5400 Pa, making it a strong choice for installations in regions with extreme weather conditions, including areas with heavy snowfall.
M10 half-cut cells combined with 16 busbars limit the impact of micro-cracks on performance and improve stability under partial shading, reducing the risk of localized power loss in real-world operating conditions.
The 12-year product warranty is now the baseline for the TOPCon segment — some tier-1 competitors (e.g., Risen Energy) already offer 15-year product warranties alongside the same 30-year power warranty, which may make ReNew's offering less competitive for buyers seeking maximum coverage.
- At 22.1% efficiency, this panel is on par with typical TOPCon 550-600W modules
- At 220.7 W/m², this panel generates 3.8 W/m² less per unit area than TOPCon 550-600W median (224.4 W/m²)
- Temperature coefficient of -0.30%/°C matches the TOPCon 550-600W median
- Weight of 32.5 kg is 1.3 kg above TOPCon 550-600W median (31.2 kg) - verify structural support
- Bifacial design (80% factor) captures reflected light - adds 4-12% yield on ground-mount or white roof
Specifications
Datasheet charts
Measured curves published by Renew Photovoltaics in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 570 Wp appear here. The rest cover the whole series.
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.
Alternatives
Found 2326 panels of the same or similar size to this one, within ±10 mm. See them here Found 2368 panels of the same or similar size to this one, within ±25 mm. See them here Found 2382 panels of the same or similar size to this one, within ±50 mm. See them here Found 2547 panels of the same or similar size to this one, within ±100 mm. See them here