Strong in heat, no clear weak spot
The RPS2MH72BDXXX series consists of bifacial photovoltaic modules built on M10 PERC cells using half-cut cell technology, designed to maximize energy yield in both rooftop and ground-mounted installations. Thanks to gallium-doped cells and a multi busbar layout, these panels reduce power losses caused by micro-cracking and hot-spot effects, delivering greater reliability under demanding operating conditions. The rear side uses a high-transmission glass cover, allowing the cells to capture additional reflected light from the ground - a feature that performs especially well on solar farms with light-colored surfaces or rooftops covered with reflective membranes. The anodized aluminum frame combined with a reinforced front glass gives the series strong resistance to heavy snow and wind loads, making it a solid choice for installers working in regions with variable climate conditions. The modules also stand out for stable performance in low-light conditions - early morning, sunset, or overcast weather - which meaningfully boosts annual energy output. This solution is aimed at both commercial investors and residential installers looking for a balance between performance, durability, and predictable LCOE over the system's lifetime.
Ranking
Signals from the data
Utility-scale, commercial, shaded-installations and cold-climate.
Top 3% of the PERC 550-600 W segment, against a median of -0.350. Ranked 8,312th in the whole database.
Top 8% of the PERC 550-600 W segment, against a median of 212.9. Ranked 7,452nd in the whole database.
Top 10% of the PERC 550-600 W segment, against a median of 21.29%.
- At 21.7% efficiency, this panel is on par with typical PERC 550-600W modules
- Power density of 216.8 W/m² packs 3.9 W/m² more into the same footprint vs PERC 550-600W median (212.9 W/m²)
- -0.32%/°C temperature coefficient (median: -0.35%/°C) - retains ~1% more power at high temperatures
- At 32.5 kg, this panel is 1.7 kg heavier than the PERC 550-600W median (30.8 kg) - more demanding for installation crews
- 70% bifaciality enables rear-side power generation, boosting yield by 4-10% on reflective surfaces
Specifications
Datasheet charts
Measured curves published by Renew Photovoltaics in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 560 Wp appear here. The rest cover the whole series.
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.
Alternatives
Found 2326 panels of the same or similar size to this one, within ±10 mm. See them here Found 2368 panels of the same or similar size to this one, within ±25 mm. See them here Found 2382 panels of the same or similar size to this one, within ±50 mm. See them here Found 2547 panels of the same or similar size to this one, within ±100 mm. See them here