Strong in heat, no clear weak spot
The Recom Lynx series consists of modules based on N-type TOPCon cells, designed for high efficiency and stable performance over long periods. A key advantage is minimal LID degradation and the absence of LeTID risk, which translates directly into more predictable energy production throughout the entire lifespan of the installation. In practice, this means fewer disappointments after several seasons and a better return on investment - especially in situations where long-term performance is critical.
The Lynx series is available in mono- and bi-facial versions, including a double-sided (glass-glass) construction, which enhances resistance to weather conditions and mechanical loads. Thanks to its bi-facial design, the module can utilize reflected light from the ground, improving efficiency without increasing the surface area. This makes it a good choice for PV farms, commercial and industrial rooftops, and demanding prosumers who require low temperature coefficients and high performance in hot weather. Furthermore, the series is supported by a long warranty, which simplifies cost and risk planning for the project.
Ranking
Signals from the data
Utility-scale, commercial and hot-climate.
Top 7% of the TOPCon 600-650 W segment, against a median of -0.290. Ranked 1,309th in the whole database.
Top 16% of the TOPCon 600-650 W segment, against a median of 227.7.
N-type TOPCon cells exhibit negligible LID degradation and no LeTID risk, and combined with up to 23.5% efficiency deliver a more predictable and stable energy yield throughout the system's operating life.
The manufacturer guarantees at least 87.4% of nominal power retained after 30 years, backed by a 30-year product warranty - well above the market-standard 25 years, simplifying long-term project risk and cost planning.
The 23.5% peak efficiency matches the best comparable series, such as Huasun Himalaya V-ocean and Phono Solar Monocrystalline132/Helios, which reach the same 23.5% at the same maximum power of 730 Wp.
A 33-variant portfolio spanning 440 to 730 Wp allows the right module to be selected for both C&I rooftops and utility-scale PV farms without switching suppliers.
The double-glass construction available in the series improves mechanical and weather resistance, reducing the risk of microcracking and laminate degradation over the long term, consistent with the 30-year product warranty.
Recom achieved BNEF Tier 1 status back in 2019, but according to current data the manufacturer is not presently classified as tier-1 bankable, which can complicate project financing for banks and funds screening suppliers against the current BNEF list.
The flagship Lynx specification indicates a monofacial module, while a direct competitor at the same power and efficiency (Huasun Himalaya V-ocean, 730 Wp/23.5%) offers a bifacial construction with additional rear-side yield - in ground-mount farm applications this means forgoing a potential energy gain of several percent.
- Efficiency of 22.9% matches the TOPCon 600-650W median
- Power density of 233.2 W/m² packs 5.5 W/m² more into the same footprint vs TOPCon 600-650W median (227.7 W/m²)
- Temperature coefficient of -0.28%/°C matches the TOPCon 600-650W median
- #2268 for efficiency, #1309 for temperature performance out of 14005 panels
Specifications
Datasheet charts
Measured curves published by Recom in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 630 Wp appear here. The rest cover the whole series.
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Found 1119 panels of the same or similar size to this one, within ±10 mm. See them here Found 1125 panels of the same or similar size to this one, within ±25 mm. See them here Found 1236 panels of the same or similar size to this one, within ±50 mm. See them here Found 1917 panels of the same or similar size to this one, within ±100 mm. See them here