Skip to main content

LX-660M/210-132+BiF

660 Wp HJT Bifacial 75%
ComparePV verdict

Light for its output, weak in heat

Rank 3,258 of 14,005
Compare panels Datasheet PDF
Power (Wp)
660
Weak · bottom 8%
Efficiency (%)
21.46
Weak · bottom 7%
Density (Wp/m²)
212.5
Weak · bottom 7%
Temp (%/°C)
-0.360
Weak · bottom 4%
Weight (kg)
34.0
Strong · 4.5 kg below median
Warranty (yrs)
25
Weak · bottom 7%

The Luxor Solar ECO LINE Half Cell Bifacial (White mesh) M132 650-670 W series is designed as a high-power module for installations where maximizing energy yield from each structural section is crucial. It combines bifacial technology with half-cell architecture, allowing it to effectively generate power not only from the front, but also by utilizing reflected light from the ground - which significantly improves production in PV farms, industrial rooftops, and ground-mounted systems. The distinctive White mesh on the back side enhances the utilization of diffuse radiation and facilitates stable operation in varying lighting conditions. It is also a series for investors who want to reduce costs related to equipment and installation - the high power of a single module means fewer units are needed for the same project, resulting in simpler wiring and faster logistics. The ECO LINE M132 also features a glass-foil construction, which helps reduce the module's weight without compromising its durability, which is important for large-scale projects and rooftop installations.

Ranking

61 panels in the segment HJT 650-700 W
Metric This panel Median Position in segment Overall rank
Module efficiency 21.46% 22.20% Weak · bottom 7% 8,250
Power density 212.5 222.1 Weak · bottom 7% 8,959
Temperature coefficient -0.360 -0.240 Weak · bottom 4% 12,345
Weight per kWp 51.5 55.7 Strong · top 11% 4,883
Performance warranty 25 yrs 30 yrs Weak · bottom 7% 9,798
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

6 positive · 6 caution
Best for

Commercial, utility-scale and shaded-installations.

Not ideal for

Hot climates, roofs where every square metre has to count and tight roof space.

Strengths
51.5 kg per kWp

Top 11% of the HJT 650-700 W segment, against a median of 55.7.

Watch-outs
-0.360 %/°C temperature coefficient

Bottom 4% of the HJT 650-700 W segment, against a median of -0.240. Ranked 12,345th in the whole database.

212.5 watts per square metre

Bottom 7% of the HJT 650-700 W segment, against a median of 222.1. Ranked 8,959th in the whole database.

21.46% module efficiency

Bottom 7% of the HJT 650-700 W segment, against a median of 22.20%. Ranked 8,250th in the whole database.

What owners get
Above-peer efficiency

Peak efficiency of 21.78% exceeds directly comparable modules: Hiwatt Solar HW-M12/132H (21.6%), Techwise Summit Series (21.57%), and Resun RS9H-M (21.57%). That's a real advantage per unit of installed area.

HJT + bifacial + half-cut + white mesh

Combining HJT cells with a half-cut layout and a bifacial white mesh backsheet delivers low LID/LeTID degradation, extra rear-side gain from reflected light, and better performance under diffuse irradiance than mono-facial PERC designs.

High unit power 650-670 Wp

Fewer modules per project mean simpler cabling, faster installation, and lower BoS costs — relevant for utility-scale PV and large rooftop installations.

Lightweight glass-foil construction

Unlike the heavier glass-glass variant in the same series (e.g. HJT GG BiF M132 680-700W), the glass-foil build reduces module mass, easing installation on roofs with limited load capacity.

Established manufacturer track record

Luxor Solar has operated since 2007, headquartered in Germany, and the ECO LINE M132 series has been on the market since 2022 without discontinuation, ensuring supply and service continuity.

Trade-offs
No Tier-1 (BNEF) status

Luxor Solar is not listed on the current BNEF Tier-1 manufacturer list, which can complicate non-recourse bank financing for large-scale PV projects compared to Tier-1 peers.

Warranty below HJT's potential

A 15-year product warranty and 25-year power warranty reflect an older industry standard — thanks to low annual degradation, HJT technology now lets many manufacturers offer 25-30 year product warranties and 30-year linear power warranties.

White mesh instead of glass-glass

A white mesh backsheet typically yields a lower bifaciality factor than the glass-glass construction used in other HJT variants of the same series (e.g. LX_EL_HJT_GG_HC_BiF M132 680-700W), potentially limiting extra rear-side yield.

Notes from the database
  • At 21.5% efficiency, this panel is 0.7pp below the HJT 650-700W median of 22.2%
  • 212.5 W/m² power density is 9.6 W/m² below HJT 650-700W median (222.1 W/m²) - requires larger installation area
  • -0.36%/°C temperature coefficient - 0.12pp worse than HJT 650-700W median (-0.24%/°C), expect higher hot weather losses
  • 34.0 kg weight - 4.5 kg lighter than HJT 650-700W median (38.5 kg), reducing installation effort
  • Bifacial design (75% factor) captures reflected light - adds 4-11% yield on ground-mount or white roof

Specifications

Open datasheet PDF
Nominal power (Pmax) 660 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 21.46 % Weak Segment median 22.20%
Vmpp · Impp 37.85 V · 17.45 A Operating point at max power
Voc · Isc 45.06 V · 18.43 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 2384×1303×35 mm · 3.11 m² of roof
Weight 34.0 kg Strong Strong · 4.5 kg below median
Cells 132 · HJT Monocrystalline
Bifaciality 75 % Rear output as a share of front
Coefficient Pmax -0.360 %/°C Weak bottom 4% of its segment
Coefficient Voc · Isc -0.285 · 0.049 %/°C
NOCT 45 °C At 800 W/m², 20 °C ambient
Product warranty 15 years Hardware defects only
Performance warranty 25 years Weak bottom 7% · median 30 yrs
End-of-warranty output 85.5 % Equals 548 W guaranteed
Degradation 2.50 % First year

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.360 %/°C against a segment median of -0.240
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Filter these
Size
Panel Power Eff. Temp. Weight Difference
Luxor Solar LX-660M/210-132+BiF 660 W 21.46% -0.360 34.0 kg You are here
AIKO-A650-MAE72Mw 650 W 25.20% -0.260 27.0 kg Cooler, lighter, +3.7 pp
AIKO-A680-MDE72Mw 680 W 25.20% -0.260 29.0 kg Cooler, lighter, +3.7 pp
AIKO-A675-MDE72Mw 675 W 25.00% -0.260 29.0 kg Cooler, lighter, +3.5 pp
AIKO-A645-MAE72Mw 645 W 25.00% -0.260 27.0 kg Cooler, lighter, +3.5 pp
AIKO-A700-MAE78Dw 700 W 25.00% -0.260 34.5 kg Cooler, +3.5 pp, +5 yr warranty
AIKO-A695-MAE78Dw 695 W 24.90% -0.260 34.5 kg Cooler, +3.4 pp, +5 yr warranty
AIKO-G670-MCH72Mw 670 W 24.80% -0.260 28.2 kg Cooler, lighter, +3.3 pp
LX-650M/210-132+BiF 650 W 21.13% -0.360 34.0 kg -10 W, -0.3 pp
LX-655M/210-132+BiF 655 W 21.29% -0.360 34.0 kg Very close match
LX-665M/210-132+BiF 665 W 21.62% -0.360 34.0 kg Very close match
LX-670M/210-132+BiF 670 W 21.78% -0.360 34.0 kg +10 W, +0.3 pp
AIKO-A805-GRH78Dw 805 W 25.10% -0.260 39.8 kg +145 W, cooler, +3.6 pp
AIKO-A800-GRH78Dw 800 W 24.90% -0.260 39.8 kg +140 W, cooler, +3.4 pp
AIKO-A795-GRH78Dw 795 W 24.80% -0.260 39.8 kg +135 W, cooler, +3.3 pp
AIKO-A790-GRH78Dw 790 W 24.60% -0.260 39.8 kg +130 W, cooler, +3.1 pp
TSM-NEG21C.20Q-760 760 W 24.50% -0.260 38.3 kg +100 W, cooler, +3.0 pp

Found 1390 panels of the same or similar size to this one, within ±10 mm. See them here Found 1400 panels of the same or similar size to this one, within ±25 mm. See them here Found 1400 panels of the same or similar size to this one, within ±50 mm. See them here Found 1432 panels of the same or similar size to this one, within ±100 mm. See them here

Common questions

6 answered
What warranty does the Luxor Solar ECO LINE Half Cell Bifacial M132 650–670 W carry?
The manufacturer provides a 15-year product warranty and a 25-year linear power output warranty. For a full quarter-century, Luxor Solar guarantees a defined minimum power output per module. With headquarters in Germany, the company designs its modules to European quality standards, ensuring predictable long-term system performance for both residential and commercial owners.
What is HJT cell technology in the Luxor Solar ECO LINE M132, and is the premium worth it?
HJT (Heterojunction Technology) combines a monocrystalline silicon wafer with an amorphous silicon thin film, achieving higher efficiency than conventional PERC cells and a lower temperature coefficient. In the ECO LINE M132 series this translates to up to 670 Wp per module and reduced power losses on hot summer days — a meaningful advantage for large commercial installations and utility-scale PV farms.
How does bifacial technology work in the Luxor Solar ECO LINE M132, and how much additional energy yield can I expect?
Bifacial modules harvest irradiation from both the front and the rear side of the cells. The White mesh backsheet of the ECO LINE M132 series enhances absorption of reflected and diffuse light (albedo gain). In practice, ground-mount systems or installations over high-albedo surfaces such as gravel or light-colored roofing membrane can achieve 5–15% higher annual energy yield compared to a monofacial module.
Are the Luxor Solar ECO LINE M132 670 W panels suited for large industrial rooftops and ground-mount systems?
Yes — the ECO LINE M132 series is engineered for high-power applications: utility-scale PV farms, warehouse rooftops, and ground-mount systems. At up to 670 Wp per module, fewer panels are required for the same target output, reducing string count, cabling complexity, and installation time. The glass-foil construction keeps module weight around 34 kg while maintaining a snow load rating of 5400 Pa and wind load of 2400 Pa.
How does the White mesh backsheet on the ECO LINE M132 differ from a standard white backsheet?
A conventional white backsheet on a bifacial module blocks light transmission entirely. White mesh is a perforated rear layer that allows a portion of reflected irradiation to reach the rear cells while still providing mechanical protection and electrical insulation. This enables the ECO LINE M132 series to better capture diffuse irradiation, especially under partially overcast skies or in systems installed over high-albedo ground surfaces.
Is Luxor Solar a reliable manufacturer? The brand is not Tier 1 — should that be a concern?
Luxor Solar is a German-headquartered company with a long track record in the European PV market. Bloomberg NEF's Tier 1 classification is based on financial criteria related to module securitization, not product quality directly. Luxor Solar modules comply with IEC standards and are sold through certified distributors across Europe. For commercial or project-financed installations, it is advisable to confirm that the project insurer or lender accepts modules from manufacturers outside the Tier 1 list.
Add to compare