Skip to main content
Luxen Solar Energy Brand review

LNDT-660BD

660 Wp Back Contact Bifacial 70%
ComparePV verdict

Solid all-round for its segment

Rank 564 of 14,129
Compare panels Datasheet PDF
Power (Wp)
660
Typical for its class
Efficiency (%)
24.43
Typical · median 24.40%
Density (Wp/m²)
244.3
Typical · median 244.3
Temp (%/°C)
-0.260
Typical · median -0.260
Weight (kg)
32.5
Typical · median 32.8 kg
Warranty (yrs)
30
Typical · median 30 yrs

The 132BC series from Luxen Solar Energy stands out through its use of back contact (BC) cell technology combined with a 0BB (zero busbar) design, resulting in a front surface completely free of visible grid lines and busbars. The outcome is a uniform, elegant double-glass module with a white backsheet that suits both residential rooftops and commercial installations where facade aesthetics matter as much as performance. The busbar-free construction eliminates typical microcrack stress points and reduces the risk of localized hotspots, delivering greater operational safety even under partial shading. The panels offer a high bifaciality factor, allowing additional energy harvest from reflected light reaching the rear surface, which is especially valuable for ground-mount arrays and flat roofs with light-colored surroundings. Thanks to a low power temperature coefficient, the modules maintain stable output on hot days better than designs built on conventional PERC or TOPCon cells. The 132BC series is backed by a 30-year linear power warranty, making it an attractive choice for investors planning long-term returns and a lower LCOE. It is a fitting option for customers seeking a combination of modern design, high reliability, and predictable energy yield for decades to come.

Ranking

88 panels in the segment Back Contact 650-700 W
Metric This panel Median Position in segment Overall rank
Module efficiency 24.43% 24.40% Typical 99
Power density 244.3 244.3 Typical 100
Temperature coefficient -0.260 -0.260 Typical 515
Weight per kWp 49.2 49.8 Typical 2,818
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

5 positive · 2 caution
What owners get
Record module efficiency of 23.69-24.8%

The 132BC series efficiency exceeds comparable 670 Wp peer modules by roughly 3 percentage points (Hiwatt HW-M12/132H - 21.6%, Techwise Summit Series - 21.57%, Resun RS9H-M - 21.57%), meaning a smaller footprint per kWp installed.

Back contact 0BB busbar-free technology

The absence of visible busbars and grid lines on the front side eliminates typical micro-crack and hot-spot initiation points, improving operational safety under partial shading while delivering a uniform, aesthetically clean surface valued in commercial and façade installations.

Bifacial design with extra energy yield

The dual-glass construction with a high bifaciality factor enables extra energy generation from reflected light on the rear side, particularly valuable for ground-mount installations and flat roofs with light-colored surfaces.

30-year linear power warranty

The power warranty covers 30 years, matching the premium tier-1 standard and supporting a lower LCOE and more predictable long-term return on investment.

BNEF Tier-1 status since 2022

Luxen Solar Energy has held BloombergNEF Tier-1 status since 2022 and ranks among the top 50 most bankable module manufacturers per PV Tech, easing project financing for commercial and utility-scale deployments.

Trade-offs
15-year product warranty trails premium trend

While the power warranty extends to 30 years, the product (materials) warranty is limited to 15 years - many tier-1 manufacturers now offer 25-year product warranties on premium lines, which may matter to investors weighing total service-risk cost.

Limited field track record for back contact at scale

Back contact 0BB technology has a shorter mass-production history than TOPCon or PERC used by the peer comparables (Hiwatt, Techwise, Resun), so long-term field data on back-contact soldering durability under real-world conditions remains more limited.

Notes from the database
  • At 24.4% efficiency, this panel is on par with typical Back Contact 650-700W modules
  • At 244.3 W/m² power density, roof space requirements are typical for Back Contact 650-700W panels
  • At -0.26%/°C, hot weather performance is typical for Back Contact 650-700W panels
  • 70% bifaciality enables rear-side power generation, boosting yield by 4-10% on reflective surfaces
  • In the top 1% for efficiency among all Back Contact panels

Specifications

Open datasheet PDF
Nominal power (Pmax) 660 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 24.43 % Typical Segment median 24.40%
Vmpp · Impp 41.18 V · 16.03 A Operating point at max power
Voc · Isc 49.92 V · 16.70 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 2382×1134×30 mm · 2.70 m² of roof
Weight 32.5 kg Typical Typical · median 32.8 kg
Cells 132 · Back Contact Monocrystalline
Bifaciality 70 % Rear output as a share of front
Coefficient Pmax -0.260 %/°C Typical median -0.260 of its segment
Coefficient Voc · Isc -0.200 · 0.050 %/°C
NOCT 45 °C At 800 W/m², 20 °C ambient
Product warranty 15 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 88.8 % Equals 586 W guaranteed
Degradation 1.00 → 0.35 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by Luxen Solar Energy in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 660 Wp appear here. The rest cover the whole series.

Linear Power Warranty Linear Power Warranty Whole series

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.260 %/°C against a segment median of -0.260
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Filter these
Size
Panel Power Eff. Temp. Weight Difference
Luxen Solar Energy LNDT-660BD 660 W 24.43% -0.260 32.5 kg You are here
AIKO-A650-MAE72Mw 650 W 25.20% -0.260 27.0 kg -10 W, lighter, +0.8 pp
AIKO-A680-MDE72Mw 680 W 25.20% -0.260 29.0 kg +20 W, lighter, +0.8 pp
AIKO-A675-MDE72Mw 675 W 25.00% -0.260 29.0 kg +15 W, lighter, +0.6 pp
AIKO-A645-MAE72Mw 645 W 25.00% -0.260 27.0 kg -15 W, lighter, +0.6 pp
AIKO-A700-MAE78Dw 700 W 25.00% -0.260 34.5 kg +40 W, heavier, +0.6 pp
WST-675BKX72-A2 675 W 25.00% -0.260 32.1 kg +15 W, +0.6 pp
AIKO-A695-MAE78Dw 695 W 24.90% -0.260 34.5 kg +35 W, heavier, +0.5 pp
AIKO-G670-MCH72Mw 670 W 24.80% -0.260 28.2 kg +10 W, lighter, +0.4 pp
LNDT-605ND 605 W 22.40% -0.290 33.8 kg -55 W, hotter, -2.0 pp
LNDT-610ND 610 W 22.58% -0.290 33.8 kg -50 W, hotter, -1.9 pp
LNDT-615ND 615 W 22.77% -0.290 33.8 kg -45 W, hotter, -1.7 pp
LNDT-620N 620 W 22.95% -0.290 28.8 kg -40 W, lighter, -1.5 pp
LNDT-625N 625 W 23.14% -0.290 28.8 kg -35 W, lighter, -1.3 pp
LR7-72HVHF-670M 670 W 24.80% -0.260 28.5 kg +10 W, lighter, +0.4 pp
JKM650-670N-66QL6-BDV (670W class) 670 W 24.80% -0.260 32.5 kg +10 W, +0.4 pp

Found 1144 panels of the same or similar size to this one, within ±10 mm. See them here Found 1150 panels of the same or similar size to this one, within ±25 mm. See them here Found 1261 panels of the same or similar size to this one, within ±50 mm. See them here Found 1942 panels of the same or similar size to this one, within ±100 mm. See them here

About the 132BC series

7 answered

These answers cover the whole series. Where a figure differs, the specification above is this module's own.

How does back contact (BC) cell technology in the 132BC series differ from classic PERC or TOPCon cells?
In back contact cells, all electrical connections are moved to the rear of the cell, so the front surface is completely free of visible busbars and metallization grids. In classic PERC or TOPCon cells, front-side metallization shades part of the surface, reducing yield. The 132BC series, combining BC with a 0BB busbar-free design, gains more active surface area, better aesthetics, and lower optical losses.
Are Luxen 132BC panels suitable for residential roofs in terms of appearance?
Yes, this is one of the series' main advantages. The absence of visible busbars and the uniform surface, available in a dual-glass version with a white backsheet, give the panels an elegant, discreet look on sloped roofs. This line was specifically designed for customers who value facade aesthetics as much as energy performance.
How much extra energy does a bifacial 132BC panel produce compared to a monofacial module?
Thanks to a high bifaciality factor, 132BC modules capture additional reflected radiation on the rear surface. In practice, for ground-mounted installations or flat roofs with a light, reflective surface, the additional energy gain can range from a few percent to over ten percent annually, depending on the ground albedo and mounting height.
What is the warranty on Luxen Solar Energy 132BC series panels?
The 132BC series comes with a 15-year product warranty and a 30-year linear power warranty. This means the manufacturer covers material and workmanship defects for 15 years, while guaranteeing a minimum power output level for 30 years, resulting in a more predictable return on investment and lower LCOE for the investor.
Do 132BC panels handle heat better than modules with classic cells?
Yes, the 132BC series features a low temperature coefficient of power, meaning a smaller output drop at high cell temperatures. In practice, on hot, sunny days the module maintains higher productivity compared to designs based on classic PERC or TOPCon cells, which matters for roof installations with limited ventilation.
Does the busbar-free design of 132BC panels affect module durability and safety?
Yes, the busbar-free construction eliminates typical stress concentration points where microcracks most often form. It also reduces the risk of local hotspots under partial shading, such as from leaves or a chimney. As a result, 132BC panels are less prone to degradation and localized defects compared to classic modules with busbar grids.
Is Luxen Solar Energy a reputable manufacturer, and is it worth investing in modules made in China?
Luxen Solar Energy holds Tier 1 manufacturer status, indicating strong financial stability, large-scale production, and international market recognition. The company is headquartered in China, but Tier 1 status is granted based on bankability audits assessing manufacturer reliability, not country of origin, giving investors added confidence in long-term warranty support.
Add to compare