Skip to main content

LNDT-605N

605 Wp N-type
ComparePV verdict

Light for its output, no clear weak spot

Rank 2,123 of 14,005
Compare panels Datasheet PDF
Power (Wp)
605
Weak · bottom 10%
Efficiency (%)
22.40
Typical · median 22.77%
Density (Wp/m²)
224.0
Typical · median 227.7
Temp (%/°C)
-0.290
Typical · median -0.290
Weight (kg)
28.8
Strong · 3.7 kg below median
Warranty (yrs)
30
Typical · median 30 yrs

The N5 series from Luxen Solar Energy consists of photovoltaic modules built on N-type cells in a TOPCon architecture, combining high conversion efficiency with resistance to common PV degradation issues such as light- and voltage-induced degradation. The use of half-cut cells along with multi-busbar (SMBB) technology reduces resistive and current losses, allowing the panel to maintain stable output even under partial shading. The glass-glass construction in the bifacial version enables additional energy harvest from light reflected off the ground surface, making this series an attractive choice for ground-mount installations, solar farms, and flat roofs where maximizing energy yield per available area is a priority. The panels stand out for their high PID resistance and low power temperature coefficient, resulting in better performance in high-temperature conditions and a stable performance ratio throughout the module's lifetime. The N5 series is aimed at both commercial investors and installers seeking a solution with low levelized cost of energy (LCOE) per kWp, while maintaining a robust mechanical build and long module lifespan.

Ranking

359 panels in the segment N-type 600-650 W
Metric This panel Median Position in segment Overall rank
Module efficiency 22.40% 22.77% Typical 4,774
Power density 224.0 227.7 Typical 4,780
Temperature coefficient -0.290 -0.290 Typical 2,165
Weight per kWp 47.6 52.7 Strong · top 21% 1,769
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

6 positive · 2 caution
Best for

Utility-scale, commercial, shaded-installations and hot-climate.

Strengths
47.6 kg per kWp

Top 21% of the N-type 600-650 W segment, against a median of 52.7.

What owners get
N-type TOPCon cells with SMBB technology

The use of N-type TOPCon half-cut cells combined with multi-busbar (SMBB) technology reduces resistive losses and delivers high resistance to LID/PID degradation, resulting in more stable energy yield over the module's lifetime compared to older PERC modules.

Wide power range of 420-640 Wp

15 variants in the N5 series cover power ratings from 420 to 640 Wp, allowing the panel to be matched to both residential installations and utility-scale PV farms without switching suppliers. The 640 Wp top model matches the flagship power output of peer series (REC Alpha Pro M, Jetion JT SRt(B)).

Tier-1 manufacturer per BloombergNEF

Luxen Solar Energy has held Tier-1 BNEF status since 2022 and has operated since 2005, easing project financing (bankability) for PV installations built on this series - a key factor for commercial investors.

Low power temperature coefficient

A Pmax temperature coefficient of -0.29%/°C limits power losses at high module temperatures, improving performance ratio in installations exposed to strong irradiance and high ambient temperatures.

Long warranty: 20 years / 30 years power

A 20-year product warranty combined with a 30-year power warranty retaining a minimum of 87.4% output is a premium-class standard among N-type manufacturers, supporting a lower LCOE over the long investment horizon.

Trade-offs
Efficiency trails segment leader

The maximum efficiency of 23.14% is about 0.55 pp lower than the Jinko Solar EAGLE G7B module (23.69%) at the same 640 Wp max power - a small gap, but noticeable on roofs with limited surface area.

Shorter Tier-1 track record and production scale

Luxen has held Tier-1 BNEF status only since 2022, with a targeted production capacity of 10 GW, whereas global peers such as Jinko Solar operate at a far larger, long-established production scale and longer bankability track record.

Notes from the database
  • At 22.4% efficiency, this panel is on par with typical N-type 600-650W modules
  • 224.0 W/m² power density is 3.7 W/m² below N-type 600-650W median (227.7 W/m²) - requires larger installation area
  • At -0.29%/°C, hot weather performance is typical for N-type 600-650W panels
  • Weight of 28.8 kg (3.7 kg below N-type 600-650W median of 32.5 kg) allows easier transport and roof mounting
  • #4774 for efficiency, #2165 for temperature performance out of 14005 panels

Specifications

Open datasheet PDF
Nominal power (Pmax) 605 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 22.40 % Typical Segment median 22.77%
Vmpp · Impp 40.71 V · 14.86 A Operating point at max power
Voc · Isc 47.85 V · 15.78 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 2382×1134×33 mm · 2.70 m² of roof
Weight 28.8 kg Strong Strong · 3.7 kg below median
Cells 132 · N-type Monocrystalline
Coefficient Pmax -0.290 %/°C Typical median -0.290 of its segment
Coefficient Voc · Isc -0.250 · 0.045 %/°C
NOCT 45 °C At 800 W/m², 20 °C ambient
Product warranty 20 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 87.4 % Equals 529 W guaranteed
Degradation 1.00 → 0.40 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by Luxen Solar Energy in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 605 Wp appear here. The rest cover the whole series.

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.290 %/°C against a segment median of -0.290
-
Filter these
Size
Panel Power Eff. Temp. Weight Difference
Luxen Solar Energy LNDT-605N 605 W 22.40% -0.290 28.8 kg You are here
AIKO-A650-MAE72Mw 650 W 25.20% -0.260 27.0 kg +45 W, cooler, +2.8 pp
AIKO-A645-MAE72Mw 645 W 25.00% -0.260 27.0 kg +40 W, cooler, +2.6 pp
LR7-60HVH-560M 560 W 24.80% -0.260 25.0 kg -45 W, lighter, +2.4 pp
AIKO-A640-MAE72Mw 640 W 24.80% -0.260 27.0 kg +35 W, cooler, +2.4 pp
LR7-60HVH-555M 555 W 24.60% -0.260 25.0 kg -50 W, lighter, +2.2 pp
AIKO-A635-MAE72Mw 635 W 24.60% -0.260 27.0 kg +30 W, cooler, +2.2 pp
LNDT-610ND 610 W 22.58% -0.290 33.8 kg Heavier
LNDT-615ND 615 W 22.77% -0.290 33.8 kg +10 W, heavier, +0.4 pp
LNDT-620N 620 W 22.95% -0.290 28.8 kg +15 W, +0.6 pp
LNDT-625N 625 W 23.14% -0.290 28.8 kg +20 W, +0.7 pp
AIKO-A680-MDE72Mw 680 W 25.20% -0.260 29.0 kg +75 W, cooler, +2.8 pp
AIKO-A675-MDE72Mw 675 W 25.00% -0.260 29.0 kg +70 W, cooler, +2.6 pp
AIKO-A700-MAE78Dw 700 W 25.00% -0.260 34.5 kg +95 W, heavier, +2.6 pp
AIKO-A695-MAE78Dw 695 W 24.90% -0.260 34.5 kg +90 W, heavier, +2.5 pp
AIKO-G670-MCH72Mw 670 W 24.80% -0.260 28.2 kg +65 W, cooler, +2.4 pp
LR7-72HVHF-670M 670 W 24.80% -0.260 28.5 kg +65 W, cooler, +2.4 pp

Found 1119 panels of the same or similar size to this one, within ±10 mm. See them here Found 1125 panels of the same or similar size to this one, within ±25 mm. See them here Found 1236 panels of the same or similar size to this one, within ±50 mm. See them here Found 1917 panels of the same or similar size to this one, within ±100 mm. See them here

Common questions

6 answered
How does the N5 series differ from panels based on P-type cells?
N5 panels use N-type cells in TOPCon architecture, which offer higher base efficiency and practically no light-induced degradation (LID), common in older P-type cells. As a result, the module loses less power in the first year of operation and maintains higher energy yield throughout the 30-year power warranty period.
What is the maximum power output of a Luxen N5 series panel?
The most powerful variant in the N5 series reaches up to 640 Wp. This high unit power comes from half-cut cells and multi-busbar (SMBB) technology, which reduce current losses and deliver more energy from the same module surface — especially valuable when designing PV farms and large flat roofs.
What warranty comes with Luxen LUXPOWER N5 panels?
The manufacturer provides a 20-year product warranty and a 30-year power performance warranty. This covers both material and workmanship defects, as well as guaranteed power output retention over a long period — a standard offered by tier 1 manufacturers like Luxen Solar Energy.
Are N5 panels suitable for solar farms and flat roof installations?
Yes, the glass-glass construction and high PID resistance make the N5 series well suited for ground-mount installations and flat roofs, where modules face longer sun exposure and harsher operating conditions. A low power temperature coefficient also ensures stable performance at the high module temperatures typical of summer PV farms.
What is PID resistance and why does it matter for N5 panels?
PID (potential-induced degradation) is a power loss phenomenon caused by voltage differences between cells and the frame or grounding, common in large string installations. N5 panels offer high PID resistance, reducing the risk of performance decline over time and delivering higher, more predictable energy yield throughout the system's lifetime.
Is Luxen Solar Energy a reliable PV panel manufacturer?
Luxen Solar Energy is a tier 1 manufacturer headquartered in China, meeting the strict financial and production criteria used to classify the largest, most stable module makers. Tier 1 status also facilitates bank financing for projects and provides greater assurance regarding future warranty service availability.
Add to compare