Light for its output, needs the roof space
Jinko Solar's Tiger Neo 78HL4-(V) series was designed for maximum yield from every square meter - these are monocrystalline N-type modules featuring TOPCon technology and a half-cell structure. This design handles partial shading more effectively and minimizes heating losses. This translates to more stable energy production in variable conditions, especially on rooftops with obstacles, installations near attics, and facilities where shade appears periodically.
A key feature is high resistance to degradation, typical of N-type cells - translating to better predictability of yield over the long term and lower power drop risks compared to many standard P-type modules. Additionally, a lower temperature coefficient helps maintain performance during summer, and a robust construction (anti-reflective glass and housing with a high-sealability rating) facilitates trouble-free operation.
This is an excellent choice for commercial and industrial installations, PV farms, and large rooftops, where yield, reliability, and minimizing losses in real operating conditions matter.
Ranking
Signals from the data
Commercial, utility-scale, shaded-installations and hot-climate.
Roofs where every square metre has to count and tight roof space.
Top 23% of the N-type 600-650 W segment, against a median of 52.7.
Bottom 6% of the N-type 600-650 W segment, against a median of 227.7. Ranked 6,655th in the whole database.
Bottom 7% of the N-type 600-650 W segment, against a median of 22.77%. Ranked 6,517th in the whole database.
N-type TOPCon cells deliver a temperature coefficient of Pmax at -0.29%/°C versus the typical -0.35%/°C of PERC modules, translating into measurably higher summer energy yield. SMBB technology and the half-cut cell layout minimize partial-shading losses and suppress LID/LETID degradation.
Jinko guarantees ≥87.4% of nominal power after 30 years with an annual degradation rate of 0.4% (post year 1), exceeding the common 25-year / 84.8% retention standard offered by P-type modules from Trina or JA Solar in the same vintage period.
The 615–635 Wp power range reduces module count per installation and lowers BoS costs (cabling, racking, labor). The top-tier 635 Wp variant matches the peak wattage of comparable series including the Talesun TM7G78M and Longi Hi-MO X10 Explorer.
Jinko Solar maintains continuous BNEF Tier 1 bankable status, facilitating non-recourse project financing and satisfying lender due diligence requirements for commercial and utility-scale installations. Founded in 2006, Jinko is among the global top four manufacturers each exceeding 80 GW annually.
Certified wind load of 2,400 Pa and snow load of 5,400 Pa ensure reliable operation in demanding climatic conditions and on rooftops with variable snow accumulation, meeting requirements common in Central European markets.
The Tiger Neo 78HL4-(V) line was discontinued in 2024 (released 2021). This limits availability of new modules, complicates replenishment in case of damage, and shortens the manufacturer's active technical support lifecycle compared to current Jinko product lines.
All three identified peer comparables — Longi Hi-MO X10 Explorer, Sunpro TOPCon 210R Bifacial, and Talesun TM7G78M BIPRO — are bifacial modules offering a potential 10–20% additional yield from albedo reflection. The absence of bifaciality is a material limitation for ground-mount and light-membrane rooftop installations where bifacial factor directly impacts LCOE.
At the same module footprint, the Longi Hi-MO X10 Explorer and Sunpro TOPCon 210R reach 23.5–23.51% efficiency, exceeding the 78HL4-(V) maximum by approximately 0.78 percentage points. On a 100 kWp installation, this gap equates to roughly 3–4 m² less roof area needed — or proportionally higher yield at the same footprint.
- Module efficiency of 22.0% is 0.8pp below average for N-type 600-650W panels (median: 22.8%)
- Power density of 220.0 W/m² is 7.7 W/m² below N-type 600-650W median (227.7 W/m²) - needs more roof space
- At -0.29%/°C, hot weather performance is typical for N-type 600-650W panels
- At 29.5 kg, this panel is 3.0 kg lighter than N-type 600-650W median (32.5 kg) - easier handling during installation
- Ranked #6517 out of 14005 panels for efficiency in the database
Specifications
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Found 616 panels of the same or similar size to this one, within ±10 mm. See them here Found 616 panels of the same or similar size to this one, within ±25 mm. See them here Found 616 panels of the same or similar size to this one, within ±50 mm. See them here Found 1813 panels of the same or similar size to this one, within ±100 mm. See them here