Skip to main content
JA Solar JAM72D42-635/LB

JAM72D42-635/LB

635 Wp TOPCon Bifacial 80%
ComparePV verdict

Middle of its segment, heavy for its output

Rank 2,396 of 14,005
Compare panels Datasheet PDF
Power (Wp)
635
Strong · top 16%
Efficiency (%)
22.70
Typical · median 22.80%
Density (Wp/m²)
227.2
Typical · median 227.7
Temp (%/°C)
-0.290
Typical · median -0.290
Weight (kg)
34.6
Weak · 1.9 kg above median
Warranty (yrs)
30
Typical · median 30 yrs

The JA Solar JAM72D42 LB series are modules engineered for PV farms and large-scale installations, where maximizing yield from every string row is critical. Their unique combination of N-type TOPCon cells with a double-glass (glass-glass) construction and bifaciality ensures stable performance even in challenging field conditions and weather, while additionally harnessing reflected ground light.

This solution benefits investors seeking to mitigate operational risks common in large-scale projects: lower long-term degradation facilitates maintaining planned production, and the rigid glass-glass structure enhances resistance to long-term stress. The application of modern cell architecture (including microcell technology) improves resilience against partial shading losses and boosts the reliability of string performance.

JAM72D42 LB modules are most often selected by farm developers, EPC contractors, and the industrial sector-where high power density and a genuinely lower energy cost throughout the installation's lifecycle provide a competitive advantage.

Ranking

1,086 panels in the segment TOPCon 600-650 W
Metric This panel Median Position in segment Overall rank
Module efficiency 22.70% 22.80% Typical 3,307
Power density 227.2 227.7 Typical 3,252
Temperature coefficient -0.290 -0.290 Typical 2,165
Weight per kWp 54.5 53.1 Weak · bottom 23% 8,832
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

5 positive · 2 caution
Best for

Utility-scale, commercial and shaded-installations.

Not ideal for

Weight-limited structures.

Watch-outs
54.5 kg per kWp

Bottom 23% of the TOPCon 600-650 W segment, against a median of 53.1.

What owners get
N-type TOPCon – low degradation rate

N-type TOPCon cell technology delivers an annual degradation rate of 0.4%/year (1% in year 1), guaranteeing ≥87.4% of nameplate power after 30 years. Conventional PERC modules typically degrade at 0.45–0.55%/year, meaning the JAM72D42 LB retains 1–3 pp more power over the same period, translating directly into higher lifetime energy yield and a lower LCOE.

Bifacial double-glass construction

An 80% (±10%) bifaciality factor enables energy harvesting from ground-reflected irradiance, yielding an additional 5–15% annual output on utility-scale ground-mount sites with light-colored substrates (gravel, snow). The glass-glass encapsulation eliminates the EVA backsheet, improving moisture resistance and extending mechanical service life compared to glass-foil modules.

30-year linear power warranty

JA Solar guarantees a 30-year linear power warranty with a ≥87.4% floor at year 30, backed by a 12-year product workmanship warranty — consistent with other Tier-1 bifacial TOPCon peers (Astronergy ASTRO N5, BYD AURO N) and exceeding the 25-year standard common in legacy PERC product lines. The linear structure minimizes uncertainty in long-term yield modeling for project finance.

BNEF Tier-1 bankability

JA Solar (founded 2005, China) maintains BNEF Tier-1 status as of Q1 2026, satisfying the standard non-recourse project finance requirement of modules sourced from a bankable manufacturer. This designation eliminates technology-risk flags during lender due diligence for utility-scale PV projects and supports insurance underwriting.

High power density – 625–650 Wp, 6 variants

The 625–650 Wp power range across 6 variants enables flexible string and MPPT design optimization for utility inverters. High per-module power reduces the total panel count on a given site, lowering BoS costs — including cabling, racking, and installation labor — on a per-MWp basis.

Trade-offs
Lower efficiency vs. Jinko Tiger Neo

The series peaks at 23.3% module efficiency, while the directly comparable Jinko Solar Tiger Neo 66HL4M-BDX (625–650 W, bifacial dual-glass) reaches 24.06% — a gap of approximately 0.76 pp. On area-constrained utility sites with a fixed footprint, this difference may require roughly 3–4% more JAM72D42 LB modules to achieve the same installed capacity, partially offsetting BoS savings.

Notes from the database
  • At 22.7% efficiency, this panel is on par with typical TOPCon 600-650W modules
  • Power density of 227.2 W/m² matches the TOPCon 600-650W median
  • Temperature coefficient of -0.29%/°C matches the TOPCon 600-650W median
  • At 34.6 kg, this panel is 1.9 kg heavier than the TOPCon 600-650W median (32.7 kg) - more demanding for installation crews
  • Bifaciality factor of 80% can add 4-12% extra yield with reflective mounting surface

Specifications

Open datasheet PDF
Nominal power (Pmax) 635 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 22.70 % Typical Segment median 22.80%
Vmpp · Impp 44.10 V · 14.40 A Operating point at max power
Voc · Isc 52.67 V · 15.26 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 2465×1134×30 mm · 2.80 m² of roof
Weight 34.6 kg Weak Weak · 1.9 kg above median
Cells 144 · TOPCon Monocrystalline
Bifaciality 80 % Rear output as a share of front
Coefficient Pmax -0.290 %/°C Typical median -0.290 of its segment
Coefficient Voc · Isc -0.250 · 0.045 %/°C
NOCT 45 °C At 800 W/m², 20 °C ambient
Product warranty 12 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 87.4 % Equals 555 W guaranteed
Degradation 1.00 → 0.40 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by JA Solar in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 635 Wp appear here. The rest cover the whole series.

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.290 %/°C against a segment median of -0.290
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Filter these
Size
Panel Power Eff. Temp. Weight Difference
JA Solar JAM72D42-635/LB 635 W 22.70% -0.290 34.6 kg You are here
AIKO-A650-MAE72Mw 650 W 25.20% -0.260 27.0 kg Cooler, lighter, +2.5 pp
AIKO-A680-MDE72Mw 680 W 25.20% -0.260 29.0 kg +45 W, lighter, +2.5 pp
AIKO-A675-MDE72Mw 675 W 25.00% -0.260 29.0 kg +40 W, lighter, +2.3 pp
AIKO-A645-MAE72Mw 645 W 25.00% -0.260 27.0 kg Cooler, lighter, +2.3 pp
AIKO-G670-MCH72Mw 670 W 24.80% -0.260 28.2 kg +35 W, lighter, +2.1 pp
LR7-72HVHF-670M 670 W 24.80% -0.260 28.5 kg +35 W, lighter, +2.1 pp
AIKO-A640-MAE72Mw 640 W 24.80% -0.260 27.0 kg Cooler, lighter, +2.1 pp
JAM78S30-580/MR 580 W 20.70% -0.350 30.5 kg -55 W, hotter, -2.0 pp
JAM78S30-585/MR 585 W 20.90% -0.350 30.5 kg -50 W, hotter, -1.8 pp
JAM78S30-590/MR 590 W 21.10% -0.350 30.5 kg Hotter, -1.6 pp, -5 yr warranty
JAM78S30-595/MR 595 W 21.30% -0.350 30.5 kg Hotter, -1.4 pp, -5 yr warranty
JAM78S30-600/MR 600 W 21.50% -0.350 30.5 kg Hotter, -1.2 pp, -5 yr warranty
AIKO-A700-MAE78Dw 700 W 25.00% -0.260 34.5 kg +65 W, cooler, +2.3 pp
AIKO-A695-MAE78Dw 695 W 24.90% -0.260 34.5 kg +60 W, cooler, +2.2 pp
JKM650-670N-66QL6-BDV (670W class) 670 W 24.80% -0.260 32.5 kg +35 W, cooler, +2.1 pp

Found 616 panels of the same or similar size to this one, within ±10 mm. See them here Found 616 panels of the same or similar size to this one, within ±25 mm. See them here Found 616 panels of the same or similar size to this one, within ±50 mm. See them here Found 1813 panels of the same or similar size to this one, within ±100 mm. See them here

Common questions

6 answered
What warranty does the JA Solar JAM72D42 LB come with?
The JAM72D42 LB series carries a 12-year product warranty and a 30-year linear power output warranty. After 30 years of operation, JA Solar guarantees at least 87.4% of nominal power, with an annual degradation rate of only 0.4%. This allows developers and EPC contractors to model energy production with high confidence across the full project lifetime.
What is the real-world bifacial gain for JAM72D42 LB modules?
The JAM72D42 LB has a bifaciality factor of 80% (±10%), meaning the rear side can produce up to 80% of the power the front side generates under the same irradiance. In practice, with high-albedo ground surfaces such as concrete, light gravel, or snow, the bifacial gain typically ranges from 5% to 15% above STC nameplate power. The gain is maximized with tracker or elevated fixed-tilt mounting that allows light to reach the rear side.
How does N-type TOPCon technology in the JAM72D42 LB compare to standard PERC cells?
N-type TOPCon cells in the JAM72D42 LB deliver a lower annual degradation rate (0.4% vs. approximately 0.55% for PERC) and are virtually free of light-induced degradation (LID/LeTID). This results in higher module efficiency (up to 22.9%), better low-irradiance performance, and a lower LCOE over the project lifetime compared to equivalent PERC-based modules.
Can JAM72D42 LB panels withstand heavy snow loads and strong winds?
Yes. The double glass construction provides a front mechanical load rating of 5,400 Pa and 2,400 Pa on the rear — sufficient for heavy snow accumulation and high wind loads. The glass-glass build also seals cells from moisture ingress far more effectively than glass-backsheet alternatives, which is critical for multi-decade reliability of utility-scale plants operating in demanding climates.
What types of installations is the JA Solar JAM72D42 LB designed for?
The JAM72D42 LB is engineered for utility-scale solar farms and large commercial or industrial projects. At 2,465 × 1,134 mm and approximately 34.6 kg, with power outputs up to 650 Wp, it is not suited for residential rooftop installations. It requires professional mounting structures and handling equipment, making it the preferred choice of solar developers, EPC contractors, and industrial asset owners.
Is the JAM72D42 LB compatible with 1,500 V inverter systems?
Yes, the JAM72D42 LB is rated for a 1,500 V DC system voltage, the current utility-scale standard. Operating at 1,500 V allows longer string configurations per MPPT input, reducing balance-of-system (BoS) costs through lower cabling losses and fewer combiner boxes per megawatt installed — a key advantage for large-scale project economics.
Add to compare