Efficiency leader, weak in heat
The Huasun Aurora Pro RS705~730S9-132GANT series are bidirectional glass-glass modules designed for high energy production even under less-than-ideal conditions. The use of N-type cells helps minimize typical power losses over time, while the bifacial design allows for a real increase in energy yield from reflected light from the ground - particularly on bright roofs, membranes, and ground-mounted structures. In practice, this means greater production from the same area and better cost-effectiveness in projects where every square meter counts.
These modules are characterized by excellent performance in low light, which will be appreciated by investors in Poland, given the frequent cloud cover and seasonal variations in sunlight. A key advantage is also high PID resistance, which makes it easier to maintain stable operation of the installation for years.
This solution is particularly suitable for PV farms, large industrial roofs, and investments where maximizing energy yield and durability are the top priorities.
Ranking
Signals from the data
Commercial, utility-scale and shaded-installations.
Hot climates.
Top 10% of the TOPCon 700-750 W segment, against a median of 23.00%.
Top 11% of the TOPCon 700-750 W segment, against a median of 230.2.
Bottom 8% of the TOPCon 700-750 W segment, against a median of -0.290. Ranked 8,005th in the whole database.
The series reaches a peak efficiency of 23.5% — identical to the best peer comparables (HY Solar TOPCon, Waaree HJT, PolyCrown Mono132) — placing it firmly at the top of the 700+ Wp segment. Even the lowest variant at 22.7% clearly exceeds Huasun's own portfolio average (~22.1%), confirming consistent above-average performance across all six variants.
HJT technology guarantees ≤1% first-year degradation and ≤0.3%/year in years 2–30, ensuring ≥90.3% of nameplate power after three decades. Comparable Tier-1 TOPCon modules (e.g., Jinko Tiger Neo) typically guarantee ~87.4% after 30 years — Huasun's advantage of ~2.9 percentage points translates into measurably lower LCOE at utility scale.
HJT delivers a power temperature coefficient of –0.24%/°C — substantially better than standard TOPCon (~–0.30 to –0.35%/°C) and PERC (~–0.35%/°C). At a typical cell operating temperature of 55°C, the module loses ~8.4% instead of ~10.5–12.3%, meaningfully increasing summer yield in passively cooled rooftop and ground-mount installations.
Bifaciality exceeding 95% delivers near-symmetric rear-side output — far above typical TOPCon bifacial modules at 70–85%. On bright white EPDM membranes or light-colored gravel, the rear-side contribution can reach 10–15% above an equivalent monofacial module, directly boosting specific energy yield (kWh/kWp) in ground-mount and flat-roof applications.
The amorphous silicon interlayer in the HJT heterojunction structure enhances photon absorption under diffuse and low-irradiance conditions — a critical advantage in Central European climates with frequent overcast days. A real-world 2.65 GW Huasun HJT plant in Yunnan, China exceeded its designed annual output by 2.85% in 2024, demonstrating measurable above-STC generation under sub-optimal irradiance conditions.
Huasun Energy was founded in 2020, giving it only ~5 years of operational history compared to Jinko Solar (2006), Trina Solar (1997), and LONGi (2000). Despite holding BNEF Tier-1 bankability status, the absence of a multi-decade financial track record increases uncertainty when assessing the credibility of a 30-year linear power warranty versus manufacturers with at least 15 years of market history.
HJT modules typically carry a 10–20% cost premium over TOPCon modules of comparable wattage. Direct peer comparables in this series (HY Solar N-Type TOPCon 730 Wp, PolyCrown Mono132 730 Wp) offer identical peak efficiency of 23.5% at a lower per-Wp purchase price, which may extend the simple payback period by approximately 0.5–1 year in standard residential or small commercial installations where rooftop area is not constrained.
- At 23.5% efficiency, this panel is on par with typical TOPCon 700-750W modules
- 235.0 W/m² power density - 4.8 W/m² more than TOPCon 700-750W median (230.2 W/m²), more power per roof area
- At -0.31%/°C, loses 0.02pp more power per degree than TOPCon 700-750W median (-0.29%/°C)
- Ranked #716 out of 14005 panels for efficiency in the database
Specifications
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Found 1390 panels of the same or similar size to this one, within ±10 mm. See them here Found 1400 panels of the same or similar size to this one, within ±25 mm. See them here Found 1400 panels of the same or similar size to this one, within ±50 mm. See them here Found 1432 panels of the same or similar size to this one, within ±100 mm. See them here