Solid all-round for its segment
The Hitouch 6B series consists of Hanersun photovoltaic modules built around back contact (BC) cell technology, where all electrical contacts are moved to the rear side of the cell. This leaves the front surface free of visible grid lines and busbars, improving light utilization while giving the panel a sleek, uniform appearance - a real advantage for residential rooftop installations and projects where aesthetics matter. The modules use bifacial energy generation, capturing light reflected from the ground to boost energy yield without increasing the footprint of the installation. An optimized electrical design and lower operating current reduce the risk of hot spots and microcracks, resulting in high long-term reliability. The panels are certified for mechanical load resistance and for operation in harsh conditions - salt mist, ammonia, sand, high temperature, and humidity - making them suitable for both rooftop systems and large-scale PV farms. The series is backed by a 15-year product warranty and a 30-year linear power output warranty, supported by Munich RE, positioning Hitouch 6B as a solution for investors seeking low LCOE and stable returns over decades of operation.
Ranking
Signals from the data
Residential, commercial and utility-scale.
Absence of visible front grid lines and busbars improves light utilization and module aesthetics, yielding efficiency up to 24.8% - clearly above peer comparables in the 670 Wp class (Hiwatt Solar 21.6%, Techwise Solar 21.57%, Resun Solar 21.57%).
The 23.9-24.8% efficiency range is roughly 3 percentage points higher than comparable models from competitors at the same maximum power rating, meaning a smaller installation footprint for the same energy yield.
Modules capture radiation reflected from the ground, increasing annual energy yield without expanding installation area - particularly valuable in ground-mounted systems over high-albedo surfaces.
The 30-year linear power warranty, backed by reinsurer Munich RE, lowers investor financial risk and favorably impacts LCOE calculations over a multi-decade operating horizon.
Optimized electrical design and lower operating current limit thermal degradation risk of the cells, directly supporting long-term reliability in harsh operating conditions (salt mist, ammonia, high humidity).
Hanersun achieved BNEF Tier 1 status in Q2 2023 on the strength of its 600W+ technology, but the BNEF list is updated quarterly and the manufacturer's current bankability status is not confirmed (tier_1_bankable: false) - this may complicate financing for large-scale projects requiring continuous Tier 1 listing.
The 15-year product warranty is shorter than the 25-year standard offered by leading N-type/TOPCon manufacturers (e.g., Trina Solar, JinkoSolar), despite matching the 30-year linear power warranty - this may affect the installation's perceived residual value.
- Efficiency of 24.4% matches the Back Contact 650-700W median
- At 244.3 W/m² power density, roof space requirements are typical for Back Contact 650-700W panels
- At -0.26%/°C, hot weather performance is typical for Back Contact 650-700W panels
- #113 for efficiency, #515 for temperature performance out of 14129 panels
Specifications
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Found 1144 panels of the same or similar size to this one, within ±10 mm. See them here Found 1150 panels of the same or similar size to this one, within ±25 mm. See them here Found 1261 panels of the same or similar size to this one, within ±50 mm. See them here Found 1942 panels of the same or similar size to this one, within ±100 mm. See them here
About the Hitouch 6B series
These answers cover the whole series. Where a figure differs, the specification above is this module's own.