Skip to main content
DMEGC DM590M10T-B72HSW

DM590M10T-B72HSW

590 Wp TOPCon Bifacial 80%
ComparePV verdict

Space saver, no clear weak spot

Rank 3,167 of 14,005
Compare panels Datasheet PDF
Power (Wp)
590
Strong · top 18%
Efficiency (%)
22.80
Strong · top 22%
Density (Wp/m²)
228.4
Strong · top 17%
Temp (%/°C)
-0.290
Typical · median -0.290
Weight (kg)
31.8
Typical · median 31.2 kg
Warranty (yrs)
30
Typical · median 30 yrs

The DMEGC DMxXXM10T-B72HSW series are modules designed for maximum yield from the same surface area, especially where fast returns and stable performance over years are crucial. The use of n-type TOPCon cells minimizes typical losses found in older technologies and maintains high efficiency even under weaker sunlight. The bifacial glass-glass construction supports an additional gain from reflected radiation, which genuinely helps on light-colored roofs, aggregate ground, or on installations on east-west facades. Thanks to the 144 half-cut format, the modules handle partial shading better and offer more stable performance under uneven row illumination. In practice, this series solves the problem of limited surface area and increases investment profitability without complicating the design. This is an excellent choice for utility-scale PV farms, large commercial & industrial (C&I) rooftops, and installations requiring weather resistance and long-term reliability - where competitive monofacial panels fail to utilize the surrounding potential.

Ranking

1,018 panels in the segment TOPCon 550-600 W
Metric This panel Median Position in segment Overall rank
Module efficiency 22.80% 22.44% Strong · top 22% 2,714
Power density 228.4 224.4 Strong · top 17% 2,598
Temperature coefficient -0.290 -0.290 Typical 2,165
Weight per kWp 53.9 53.8 Typical 8,021
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

7 positive · 1 caution
Best for

Commercial, utility-scale and shaded-installations.

Strengths
228.4 watts per square metre

Top 17% of the TOPCon 550-600 W segment, against a median of 224.4.

22.80% module efficiency

Top 22% of the TOPCon 550-600 W segment, against a median of 22.44%.

What owners get
Efficiency at the Top of Its Segment

The 22.5–23.2% efficiency range places this series on par with the Tongwei TWMND (23.2%) and Lexron 144HC TOPCon (23.23%), and significantly above the Talesun BISTAR TP7F78M (21.5%). The ~1.7 percentage-point advantage over Talesun translates into measurably higher energy yield from the same roof or ground area.

Low TOPCon Temperature Coefficient

The Pmax temperature coefficient of -0.31%/°C compares favorably to the typical -0.35–0.37%/°C of PERC technology. Under Polish summer conditions—with module temperatures reaching ~65°C—this results in approximately 1–1.5% lower power losses than comparable PERC modules.

Degradation ≤0.4%/year and 30-Year Linear Power Warranty

The manufacturer guarantees ≤1% first-year degradation (LID) and ≤0.4%/year over the subsequent 29 years, retaining ≥87.4% of rated power after 30 years. Kiwa PVEL has confirmed the series' resilience across thermal cycling, PID, and LID+LETID test sequences in its 2025 Reliability Scorecard.

BNEF Tier 1 (Q3 2025) and Kiwa PVEL Top Performer 2025

DMEGC has maintained BNEF Tier 1 status for six consecutive years (confirmed Q3 2025) and is listed by both S&P and SMM. The Kiwa PVEL Top Performer 2025 designation—awarded following independent stress testing—effectively eliminates the bankability risk associated with smaller manufacturers.

Bifacial Glass-Glass with Up to +25% Rear-Side Gain

The glass-glass construction with bifacial cells enables up to 25% additional energy harvest from reflected irradiance on high-albedo surfaces such as gravel, white roofing membranes, or snow. Compared to monofacial equivalents, real-world annual energy yield is 5–15% higher depending on the installation configuration.

Trade-offs
Product Warranty Limited to 15 Years

At 15 years, the product warranty falls short of premium competitors offering 25-year coverage—such as the Jinko Tiger Neo and LONGi Hi-MO 6. In the utility-scale PV and C&I segments, where financing agreements and insurance policies frequently require a 20–25-year product warranty, this limitation may complicate project bankability.

Notes from the database
  • Efficiency of 22.8% matches the TOPCon 550-600W median
  • Power density of 228.4 W/m² packs 4.0 W/m² more into the same footprint vs TOPCon 550-600W median (224.4 W/m²)
  • At -0.29%/°C, hot weather performance is typical for TOPCon 550-600W panels
  • 80% bifaciality enables rear-side power generation, boosting yield by 4-12% on reflective surfaces
  • #2714 for efficiency, #2165 for temperature performance out of 14005 panels

Specifications

Open datasheet PDF
Nominal power (Pmax) 590 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 22.80 % Strong Segment median 22.44%
Vmpp · Impp 44.23 V · 13.36 A Operating point at max power
Voc · Isc 52.90 V · 14.11 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 2278×1134×30 mm · 2.58 m² of roof
Weight 31.8 kg Typical Typical · median 31.2 kg
Cells 144 · TOPCon Monocrystalline
Bifaciality 80 % Rear output as a share of front
Coefficient Pmax -0.290 %/°C Typical median -0.290 of its segment
Coefficient Voc · Isc -0.250 · 0.048 %/°C
NOCT 42 °C At 800 W/m², 20 °C ambient
Product warranty 15 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 87.4 % Equals 516 W guaranteed
Degradation 1.00 → 0.40 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by DMEGC in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 590 Wp appear here. The rest cover the whole series.

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.290 %/°C against a segment median of -0.290
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Filter these
Size
Panel Power Eff. Temp. Weight Difference
DMEGC DM590M10T-B72HSW 590 W 22.80% -0.290 31.8 kg You are here
LR7-60HVH-560M 560 W 24.80% -0.260 25.0 kg -30 W, lighter, +2.0 pp
AIKO-A640-MAE72Mw 640 W 24.80% -0.260 27.0 kg +50 W, lighter, +2.0 pp
LR7-60HVH-555M 555 W 24.60% -0.260 25.0 kg -35 W, lighter, +1.8 pp
AIKO-A635-MAE72Mw 635 W 24.60% -0.260 27.0 kg +45 W, lighter, +1.8 pp
AIKO-A630-MAH72Dw 630 W 24.40% -0.260 32.5 kg +40 W, cooler, +1.6 pp
LR7-60HVHL-550M 550 W 24.40% -0.260 16.3 kg -40 W, 16 kg lighter, +1.6 pp
GH285M10T-B36HST 285 W 11.03% -0.290 31.0 kg -305 W, -11.8 pp
GH290M10T-B36HST 290 W 11.23% -0.290 31.0 kg -300 W, -11.6 pp
GH295M10T-B36HST 295 W 11.42% -0.290 31.0 kg -295 W, -11.4 pp
GH300M10T-B36HST 300 W 11.61% -0.290 31.0 kg -290 W, -11.2 pp
GH400M10T-B48HST-385 385 W 14.90% -0.290 31.7 kg -205 W, -7.9 pp
GH400M10T-B48HST-390 390 W 15.10% -0.290 31.7 kg -200 W, -7.7 pp
GH400M10T-B48HST-395 395 W 15.29% -0.290 31.7 kg -195 W, -7.5 pp
AIKO-A650-MAE72Mw 650 W 25.20% -0.260 27.0 kg +60 W, lighter, +2.4 pp
AIKO-A645-MAE72Mw 645 W 25.00% -0.260 27.0 kg +55 W, lighter, +2.2 pp

Found 2326 panels of the same or similar size to this one, within ±10 mm. See them here Found 2368 panels of the same or similar size to this one, within ±25 mm. See them here Found 2382 panels of the same or similar size to this one, within ±50 mm. See them here Found 2547 panels of the same or similar size to this one, within ±100 mm. See them here

Common questions

6 answered
What warranty is provided for the DMEGC DMxxxM10T-B72HSW panels, and what does it exactly cover?
The DMEGC DMxxxM10T-B72HSW series comes with a 15-year product warranty covering material and workmanship defects, along with a 30-year linear power output warranty. The manufacturer guarantees that after 30 years the module will retain at least 87.4% of its nominal power. This is one of the longest warranty periods currently available on the market and is a critical factor when calculating the return on investment for a utility-scale PV plant or an industrial installation.
Do the DMEGC DMxxxM10T-B72HSW modules perform well under low-irradiance conditions and on overcast days?
Yes. The n-type TOPCon cells used in this series feature a low temperature coefficient (approx. -0.29%/°C) and superior response to diffuse irradiance compared to older PERC modules. In practical terms, this translates into higher energy yield on cloudy days and during early morning or late afternoon hours, resulting in measurably more kilowatt-hours generated annually for the same nominal power rating.
What is the bifacial glass-glass construction in the DMxxxM10T-B72HSW series, and when does it truly pay off?
Bifacial glass-glass means the module features two glass panes instead of a rear backsheet, enabling it to generate power from both the front and rear sides by capturing irradiance reflected from the ground surface (albedo). The greatest bifacial gain is achieved on high-albedo substrates such as gravel, light-colored roofing membranes, and snow, as well as in east-west racking configurations. The all-glass encapsulation also provides enhanced resistance to moisture ingress and ammonia exposure, extending the module's service life.
What is the maximum power output of the DMEGC DMxxxM10T-B72HSW module, and what types of installations is it designed for?
The series covers modules up to 600 Wp under STC conditions. The 144 half-cut cell format in a 2278×1134 mm form factor makes this series primarily suited for large-scale applications: utility-scale PV farms, industrial rooftops, and commercial & industrial (C&I) facilities. The high per-module power rating reduces the total number of modules required per installation, thereby lowering balance-of-system (BoS) costs including structural and cabling expenses.
How do the n-type TOPCon cells in the DMEGC DMxxxM10T-B72HSW differ from mainstream PERC modules?
TOPCon (Tunnel Oxide Passivated Contact) technology based on n-type silicon achieves higher cell efficiency than PERC — approximately 22–23% versus 20–21% — and exhibits significantly lower first-year degradation as well as reduced susceptibility to LID (Light Induced Degradation). This results in higher energy yield throughout the entire system lifetime and more stable performance over subsequent decades of operation.
Is DMEGC a reputable PV manufacturer, and is the DMxxxM10T-B72HSW series a trustworthy investment?
DMEGC (Dongguan Meike Electric Co.) is a Chinese manufacturer listed on the Bloomberg NEF Tier 1 ranking, which confirms its verified financial capacity to honor long-term warranty obligations. The company holds IEC and TÜV certifications for its modules. Tier 1 status is a prerequisite for securing project finance for PV installations and provides investors with an additional layer of protection when pursuing warranty claims.
Add to compare