Skip to main content

Avaada AVN66G12RG-625

625 Wp TOPCon Bifacial 80%
ComparePV verdict

Middle of its segment, weak in heat

Rank 2,287 of 14,129
Compare panels Datasheet PDF
Power (Wp)
625
Typical for its class
Efficiency (%)
23.14
Typical · median 22.80%
Density (Wp/m²)
231.4
Typical · median 227.7
Temp (%/°C)
-0.300
Weak · bottom 19%
Weight (kg)
34.0
Weak · 1.2 kg above median
Warranty (yrs)
30
Typical · median 30 yrs

The Avaada Enlume series consists of Glass-to-Glass photovoltaic modules built around N-Type TOPCon cells using half-cut technology, engineered for utility-scale installations and single-axis tracker systems. A key advantage of the series is its bifacial power generation, which captures reflected irradiance from the ground surface to meaningfully boost energy yield without expanding the footprint of a solar farm. The dual 2 mm tempered glass construction on both sides of the module delivers strong mechanical durability, moisture resistance, protection against PID degradation, and extended service life in demanding operating conditions. Thanks to a low temperature coefficient, the panels maintain stable output even under high operating temperatures, making them an attractive choice for PV plant investors in warmer climates. The Enlume series also stands out for its compatibility with single-axis tracker systems, allowing developers to maximize energy production in utility-scale projects. This makes it a compelling option for developers and institutional investors seeking modules that combine high reliability, long-term warranty coverage, and a lower levelized cost of energy over the system's lifetime, while relying on proven manufacturing technology and compliance with rigorous quality standards applied in large-scale infrastructure projects.

Ranking

1,085 panels in the segment TOPCon 600-650 W
Metric This panel Median Position in segment Overall rank
Module efficiency 23.14% 22.80% Typical 1,554
Power density 231.4 227.7 Typical 1,558
Temperature coefficient -0.300 -0.290 Weak · bottom 19% 6,152
Weight per kWp 54.4 53.1 Weak · bottom 25% 8,784
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

5 positive · 3 caution
Best for

Utility-scale and shaded-installations.

Not ideal for

Hot climates and weight-limited structures.

Watch-outs
-0.300 %/°C temperature coefficient

Bottom 19% of the TOPCon 600-650 W segment, against a median of -0.290.

54.4 kg per kWp

Bottom 25% of the TOPCon 600-650 W segment, against a median of 53.1.

What owners get
Top-3 segment efficiency

Efficiency up to 23.3% and power up to 630 Wp put the Enlume series on par with leading peer modules (Canadian Solar TOPBiHiKu6, Resun RS8H-M-BD, Jinko Tiger Neo 66HL4M-BDV), with no meaningful performance gap versus market leaders.

N-Type TOPCon + half-cut technology

N-Type TOPCon half-cut cells deliver lower LID/LeTID degradation and better high-temperature performance than older P-Type PERC cells, translating into higher real-world annual yield.

Bifacial dual-sided energy generation

A bifaciality factor of up to 85% allows the module to capture reflected irradiance from the ground, potentially adding 5-15% additional yield on high-albedo surfaces without increasing installation footprint.

30-year linear power warranty at tier-1 level

The 89.4% power warranty at 25 years and 87.4% at 30 years, plus a 12-year product warranty, matches standards set by leading TOPCon manufacturers such as Jinko Tiger Neo.

Glass-to-Glass 2 mm construction

Dual 2 mm-thick front and back glass improves mechanical durability and protection against PID degradation and moisture ingress, which is critical for utility-scale projects operated over 25-30 years.

Trade-offs
Limited operational track record

The Enlume series launched in 2025, and Avaada Electro is a relatively new entrant on the global module market compared to Canadian Solar or Jinko Solar, which have over a decade of large-scale deployment history - institutional investors may want a longer proven track record before selecting a supplier for utility-scale projects.

Notes from the database
  • Efficiency of 23.1% matches the TOPCon 600-650W median
  • At 231.4 W/m² power density, this panel generates 3.7 W/m² more per unit area than TOPCon 600-650W median (227.7 W/m²)
  • Temperature coefficient of -0.30%/°C matches the TOPCon 600-650W median
  • At 34.0 kg (1.2 kg above TOPCon 600-650W median of 32.8 kg), requires checking roof load capacity
  • 80% bifaciality enables rear-side power generation, boosting yield by 4-12% on reflective surfaces

Specifications

Open datasheet PDF
Nominal power (Pmax) 625 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 23.14 % Typical Segment median 22.80%
Vmpp · Impp 41.45 V · 15.08 A Operating point at max power
Voc · Isc 48.40 V · 16.00 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 2382×1134×35 mm · 2.70 m² of roof
Weight 34.0 kg Weak Weak · 1.2 kg above median
Cells 132 · TOPCon Monocrystalline
Bifaciality 80 % Rear output as a share of front
Coefficient Pmax -0.300 %/°C Weak bottom 19% of its segment
Coefficient Voc · Isc -0.250 · 0.040 %/°C
NOCT 45 °C At 800 W/m², 20 °C ambient
Product warranty 12 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 87.4 % Equals 546 W guaranteed
Degradation 1.00 → 0.40 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by Avaada in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 625 Wp appear here. The rest cover the whole series.

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.300 %/°C against a segment median of -0.290
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Alternatives

All Avaada panels
Filter these
Size
Panel Power Eff. Temp. Weight Difference
Avaada AVN66G12RG-625 625 W 23.14% -0.300 34.0 kg You are here
AIKO-A650-MAE72Mw 650 W 25.20% -0.260 27.0 kg Cooler, lighter, +2.1 pp
AIKO-A675-MDE72Mw 675 W 25.00% -0.260 29.0 kg +50 W, lighter, +1.9 pp
AIKO-A645-MAE72Mw 645 W 25.00% -0.260 27.0 kg Cooler, lighter, +1.9 pp
WST-675BKX72-A2 675 W 25.00% -0.260 32.1 kg +50 W, cooler, +1.9 pp
AIKO-G670-MCH72Mw 670 W 24.80% -0.260 28.2 kg +45 W, lighter, +1.7 pp
LR7-72HVHF-670M 670 W 24.80% -0.260 28.5 kg +45 W, lighter, +1.7 pp
AIKO-A640-MAE72Mw 640 W 24.80% -0.260 27.0 kg Cooler, lighter, +1.7 pp
AVN66G12RG-610 610 W 22.60% -0.300 34.0 kg -15 W, -0.5 pp
AVN66G12RG-615 615 W 22.80% -0.300 34.0 kg -10 W, -0.3 pp
AVN66G12RG-620 620 W 23.00% -0.300 34.0 kg Very close match
AVN66G12RG-630 630 W 23.30% -0.300 34.0 kg Very close match
AIKO-A680-MDE72Mw 680 W 25.20% -0.260 29.0 kg +55 W, lighter, +2.1 pp
AIKO-A700-MAE78Dw 700 W 25.00% -0.260 34.5 kg +75 W, cooler, +1.9 pp
AIKO-A695-MAE78Dw 695 W 24.90% -0.260 34.5 kg +70 W, cooler, +1.8 pp
JKM650-670N-66QL6-BDV (670W class) 670 W 24.80% -0.260 32.5 kg +45 W, cooler, +1.7 pp

Found 1144 panels of the same or similar size to this one, within ±10 mm. See them here Found 1150 panels of the same or similar size to this one, within ±25 mm. See them here Found 1261 panels of the same or similar size to this one, within ±50 mm. See them here Found 1942 panels of the same or similar size to this one, within ±100 mm. See them here

About the Enlume series

6 answered

These answers cover the whole series. Where a figure differs, the specification above is this module's own.

How does N-Type TOPCon technology in Avaada Enlume panels differ from older PERC cells?
N-Type TOPCon cells used in the Enlume series have a lower degradation rate and higher efficiency than conventional P-Type PERC cells. The additional passivating layer in TOPCon reduces recombination losses, resulting in higher energy yield, especially at high temperatures and in low-light conditions. This is one reason the series is popular for large-scale solar farms.
What practical benefit does bifacial energy production offer in Enlume panels?
Bifacial modules in the Enlume series generate power from both the front and rear side, capturing light reflected from the ground, such as bright gravel or roofing surfaces. In practice this delivers an additional energy gain of several to over ten percent without increasing installation area, making it especially cost-effective for utility-scale projects and single-axis tracker systems.
Are Avaada Enlume panels compatible with single-axis tracker systems?
Yes, the Enlume series is designed for compatibility with single-axis tracker systems. The Glass-to-Glass construction and rigid frame handle the dynamic loads from tracker movement well, while the bifacial design further improves the economics of such installations since the rear side generates power for most of the day.
What warranty comes with Avaada Enlume panels and what does it cover?
The manufacturer provides a 12-year product warranty and a 30-year power output warranty. The product warranty covers material and workmanship defects, while the power warranty guarantees a minimum performance level over the module's lifetime, which is a key factor when calculating return on investment for utility-scale projects.
Does the dual glass construction in Enlume actually improve panel durability?
Yes, the Glass-to-Glass construction with two 2 mm glass layers replaces the traditional rear backsheet, significantly improving mechanical strength, sealing, and moisture resistance. This design effectively reduces the risk of PID degradation and microcracks, extending module lifespan in harsh climates with large temperature swings or high humidity.
Do 630 Wp Avaada Enlume panels lose performance at high temperatures?
The Enlume series features a low temperature coefficient of power, so output drops less as operating temperature rises compared to older cell technologies. This means panels rated up to 630 Wp maintain stable energy production even in hot climates, making them a strong choice for solar farms located in warmer regions.
Add to compare