Skip to main content
Avaada Brand review

AVN66G12G

720 Wp TOPCon Bifacial 80%
ComparePV verdict

Middle of its segment, weak in heat

Rank 550 of 14,129
Compare panels Datasheet PDF
Power (Wp)
720
Typical for its class
Efficiency (%)
23.18
Typical · median 23.00%
Density (Wp/m²)
231.8
Typical · median 230.2
Temp (%/°C)
-0.300
Weak · bottom 22%
Weight (kg)
38.0
Typical · median 38.0 kg
Warranty (yrs)
30
Typical · median 30 yrs

The Avaada ENLUME series is a line of photovoltaic modules built on N-Type TOPCon cell technology in a glass-to-glass design, engineered for projects where long-term reliability and predictable return on investment matter most. The use of half-cut G12 cells reduces resistive losses and improves current distribution within the module, resulting in more stable performance even under partial shading or elevated operating temperatures. The bifacial glass-to-glass construction further allows the module to harvest reflected light from the rear side, boosting energy yield without requiring additional installation area. This makes the ENLUME series well suited for rooftop, commercial, and utility-scale projects alike, where a low LCOE over the system's lifetime is a decisive factor. Its robust mechanical build and resistance to demanding weather conditions make these panels an attractive alternative to conventional PERC modules, delivering higher efficiency at comparable installation cost. International certifications confirm manufacturing quality and compliance with industry standards, simplifying the deployment of these modules in projects that require rigorous technical documentation.

Ranking

420 panels in the segment TOPCon 700-750 W
Metric This panel Median Position in segment Overall rank
Module efficiency 23.18% 23.00% Typical 1,468
Power density 231.8 230.2 Typical 1,390
Temperature coefficient -0.300 -0.290 Weak · bottom 22% 6,152
Weight per kWp 52.8 52.9 Typical 6,514
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

4 positive · 3 caution
Best for

Commercial, utility-scale and shaded-installations.

Not ideal for

Hot climates.

Watch-outs
-0.300 %/°C temperature coefficient

Bottom 22% of the TOPCon 700-750 W segment, against a median of -0.290.

What owners get
N-type TOPCon technology

N-type TOPCon cells exhibit lower LID/LeTID degradation and better high-temperature performance than legacy PERC modules; combined with a -0.30%/°C Pmax temperature coefficient, this translates into higher energy yield in hot climates.

30-year power warranty

The manufacturer offers a 30-year linear power warranty alongside a 12-year product warranty - a tier-1 standard for TOPCon technology, notably longer than the typical 25 years offered on older PERC lines.

Bifacial glass-glass design with high bifaciality

A bifaciality factor of up to 85% (lab scale) combined with a 2 mm/2 mm dual-glass construction enables additional energy harvest from reflected rear-side light without increasing installation footprint.

23.18% efficiency at the top of the segment

The 23.18% efficiency is virtually identical to the best comparable 720 Wp modules on the market (DMEGC 23.2%, Renesola and Gamko at 23.18%), confirming the competitiveness of the G12 132-cell platform used by Avaada.

Trade-offs
No confirmed BNEF Tier 1 status

Unlike established manufacturers on the BNEF Tier 1 list (e.g., DMEGC), Avaada Electro is a relatively new entrant in the PV module segment (ENLUME series launched in 2025) and has no publicly confirmed Tier 1 status, which may affect project bankability assessments by financing institutions.

Commodity platform with limited technical differentiation

The 720 Wp / 23.18% specs are identical to Renesola RS9-700~720NBG-E1 and Gamko GKA210N132BF, and nearly identical to DMEGC (23.2%), indicating a widely available G12 132-cell platform where selection may come down mainly to price rather than unique technology.

Notes from the database
  • Efficiency of 23.2% matches the TOPCon 700-750W median
  • At 231.8 W/m² power density, roof space requirements are typical for TOPCon 700-750W panels
  • At -0.30%/°C, hot weather performance is typical for TOPCon 700-750W panels
  • Bifacial design (80% factor) captures reflected light - adds 4-12% yield on ground-mount or white roof
  • #1468 for efficiency, #6152 for temperature performance out of 14129 panels

Specifications

Open datasheet PDF
Nominal power (Pmax) 720 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 23.18 % Typical Segment median 23.00%
Vmpp · Impp 41.30 V · 17.43 A Operating point at max power
Voc · Isc 49.00 V · 18.48 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 2384×1303×35 mm · 3.11 m² of roof
Weight 38.0 kg Typical Typical · median 38.0 kg
Cells 132 · TOPCon Monocrystalline
Bifaciality 80 % Rear output as a share of front
Coefficient Pmax -0.300 %/°C Weak bottom 22% of its segment
Coefficient Voc · Isc -0.250 · 0.040 %/°C
NOCT 45 °C At 800 W/m², 20 °C ambient
Product warranty 12 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 87.4 % Equals 629 W guaranteed
Degradation 1.00 → 0.40 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by Avaada in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 720 Wp appear here. The rest cover the whole series.

30-year Linear Performance Warranty 30-year Linear Performance Warranty Whole series I-V/P-V Curve at Different Irradiation I-V/P-V Curve at Different Irradiation Whole series I-V Curve at Different Temperature I-V Curve at Different Temperature Whole series

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.300 %/°C against a segment median of -0.290
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Alternatives

All Avaada panels
Filter these
Size
Panel Power Eff. Temp. Weight Difference
Avaada AVN66G12G 720 W 23.18% -0.300 38.0 kg You are here
AIKO-A680-MDE72Mw 680 W 25.20% -0.260 29.0 kg -40 W, lighter, +2.0 pp
AIKO-A675-MDE72Mw 675 W 25.00% -0.260 29.0 kg -45 W, lighter, +1.8 pp
AIKO-A700-MAE78Dw 700 W 25.00% -0.260 34.5 kg Cooler, lighter, +1.8 pp
WST-675BKX72-A2 675 W 25.00% -0.260 32.1 kg -45 W, lighter, +1.8 pp
AIKO-A695-MAE78Dw 695 W 24.90% -0.260 34.5 kg Cooler, lighter, +1.7 pp
AIKO-G670-MCH72Mw 670 W 24.80% -0.260 28.2 kg -50 W, lighter, +1.6 pp
LR7-72HVHF-670M 670 W 24.80% -0.260 28.5 kg -50 W, lighter, +1.6 pp
JKM650-670N-66QL6-BDV (670W class) 670 W 24.80% -0.260 32.5 kg -50 W, lighter, +1.6 pp
AIKO-A805-GRH78Dw 805 W 25.10% -0.260 39.8 kg +85 W, cooler, +1.9 pp
AIKO-A800-GRH78Dw 800 W 24.90% -0.260 39.8 kg +80 W, cooler, +1.7 pp
AIKO-A795-GRH78Dw 795 W 24.80% -0.260 39.8 kg +75 W, cooler, +1.6 pp
AIKO-A790-GRH78Dw 790 W 24.60% -0.260 39.8 kg +70 W, cooler, +1.4 pp
TSM-NEG21C.20Q-760 760 W 24.50% -0.260 38.3 kg +40 W, cooler, +1.3 pp
AIKO-A785-GRH78Dw 785 W 24.40% -0.260 39.8 kg +65 W, cooler, +1.2 pp
GK-4-78HGBD-780M 780 W 24.30% -0.260 38.7 kg +60 W, cooler, +1.1 pp
AIKO-A780-GRH78Dw 780 W 24.30% -0.260 39.8 kg +60 W, cooler, +1.1 pp

Found 1393 panels of the same or similar size to this one, within ±10 mm. See them here Found 1403 panels of the same or similar size to this one, within ±25 mm. See them here Found 1403 panels of the same or similar size to this one, within ±50 mm. See them here Found 1435 panels of the same or similar size to this one, within ±100 mm. See them here

About the ENLUME series

6 answered

These answers cover the whole series. Where a figure differs, the specification above is this module's own.

What is the maximum power output of Avaada ENLUME panels?
The most powerful modules in the ENLUME series reach up to 720 Wp. This is achieved through N-Type TOPCon half-cut cells in the G12 format, which reduce resistive losses and improve current distribution across the module. Higher per-panel power output means fewer modules are needed to reach a target system size, lowering mounting structure and labor costs.
How does TOPCon technology in ENLUME panels differ from classic PERC panels?
TOPCon is a newer generation of N-Type cells that reduces rear-surface recombination losses, resulting in higher efficiency and better high-temperature performance than classic PERC cells. In practice this means higher energy yield from the same roof area and slower power degradation over time, at comparable installation costs.
What is the benefit of the bifacial glass-glass construction in ENLUME panels?
ENLUME bifacial glass-glass modules generate power from both the front and rear side, capturing light reflected from the roof, ground, or bright surfaces. Depending on ground albedo and mounting configuration, this can boost total energy yield by several percentage points without increasing installation footprint. The glass-glass build is also more resistant to moisture ingress and degradation than a standard backsheet.
What warranty comes with Avaada ENLUME panels?
ENLUME panels come with a 12-year product warranty covering material and workmanship defects, plus a 30-year power warranty guaranteeing a defined performance level over the long term. These terms are comparable to leading TOPCon manufacturers, allowing investors to accurately project ROI over several decades.
Are ENLUME panels suitable for utility-scale and commercial installations?
Yes, the high per-module power output (up to 720 Wp), low degradation rate, and bifacial design make the ENLUME series particularly cost-effective for large-scale PV farms and commercial projects, where low LCOE over the system's lifetime matters most. The sturdy mechanical build also ensures resilience against harsh weather typical of ground-mounted installations.
Who manufactures Avaada ENLUME panels and are they certified?
Avaada is a manufacturer based in India, and the ENLUME series holds international certifications confirming production quality and compliance with industry standards. This makes it easier to deploy these modules in projects requiring rigorous technical documentation, including tenders and large externally financed commercial investments.
Add to compare