Skip to main content

APsystems vs Renew Photovoltaics - solar panel manufacturer comparison

APsystems
China Founded 2010
Read the APsystems review
VS
Renew Photovoltaics
India Founded 2011
Read the Renew Photovoltaics review
At a glance

Renew Photovoltaics has the broader catalog (14 vs 0 models). Renew Photovoltaics leans bifacial (93% of lineup).

Both catalogues are read from the manufacturers' own datasheets. A brand is not scored against the market here, only against the other brand on this page.

Panel models
0 14
Highest power
0 Wp 640 Wp
Best efficiency
- 23.7%
Average efficiency
- 21.8%
Bifacial share
0% 93%
Average warranty
- 30 yrs
01

The two companies

Company facts, not datasheet figures
APsystems

APsystems (Altenergy Power System, operating as Yuneng Technology) is a global manufacturer specializing in multi-module microinverters, energy storage systems, and rapid shutdown devices for residential and commercial solar installations. Founded in Silicon Valley in 2010 and now headquartered in China with a major...

Founded
2010
Headquarters
Jiaxing, China
Employees
500-1000
Renew Photovoltaics

ReNew is a leading decarbonization company and one of the largest renewable energy independent power producers in India. Founded in 2011 by Sumant Sinha, the company delivers end-to-end decarbonization solutions, including wind, solar, hydropower, green hydrogen, energy storage, carbon credits and energy services...

Founded
2011
Headquarters
Gurugram, India
Annual capacity
6+ GW/year
Employees
4,336
02

Catalogue against catalogue

Averages over every model in the database
Metric APsystems Renew Photovoltaics
Catalog & Power
Panel Models 0 14+14
Max Power 0 W 640 W+640 W
Avg Power 0 W 569 W+569 W
Efficiency
Max Efficiency - 23.69%
Avg Efficiency - 21.80%
Reliability & Warranty
Avg Temp Coefficient - -0.311%/°C
Bifacial Share 0 (0%) 13 (93%)+93 pp
Avg Warranty - 29.6 yrs

An average over a catalogue describes the range a manufacturer publishes, not the module you would buy. A brand with two flagship panels and eighty older ones averages worse than one that has retired its back catalogue.

03

What each of them builds

Cell technology across the market
Efficiency spread
Share of each catalogue in every efficiency band

Renew Photovoltaics skews to higher efficiency: 7% of lineup is 23%+

Power spread
Share of each catalogue in every power band

Renew Photovoltaics offers more 600W+ panels (14% of lineup)

APsystems cell technology
Share of their models by cell architecture
Renew Photovoltaics cell technology
Share of their models by cell architecture

Dominant cell tech: PERC (57%)

04

The flagships

Highest-power models from each brand
APsystems all models
No panels from this manufacturer are in the database yet.
05

Written summary

Checking cache...

APsystems is a California-headquartered microinverter and module-level power electronics (MLPE) specialist with roots dating back to the early 2010s and manufacturing operations extending into Asia. In 2025 it was ranked first in Sinovoltaics' global inverter bankability assessment, which uses an Altman Z-score to gauge financial stability, and the company reports cumulative shipments exceeding 6 GW of MLPE products installed across more than 130 countries, alongside extended 25-year warranties on its DS3 and QT2 lines introduced that year. These figures are largely self-reported or drawn from a single third-party financial ranking rather than an independent product test, but the volume of press coverage and the Sinovoltaics placement point to a company with an established institutional footprint in the microinverter segment specifically. Renew Photovoltaics, by contrast, does not appear in any of the industry publications, bankability lists, or independent review sites typically used to evaluate solar manufacturers, and no verifiable information on its founding, headquarters, production scale, or certification status could be located through available research. This asymmetry means APsystems currently has the far stronger and better-documented institutional footprint of the two.

Given the confirmed information, APsystems is positioned around residential and light-commercial rooftop installations, with its EZ1 plug-in unit aimed at the DIY and balcony-solar market and the QT2 three-phase line serving small commercial sites; it operates purely in power electronics rather than manufacturing the solar cells or panels themselves, so comparisons to cell technologies like TOPCon or HJT do not directly apply to its product line. No comparable profile, typical use case, or technology mix could be substantiated for Renew Photovoltaics given the absence of independent or company-level sourcing.

Because one brand is well documented through a recognized bankability ranking and extensive press coverage, while the other returned no verifiable public information in trade press, review sites, or certification databases, a meaningful side-by-side verdict is not possible. A buyer evaluating Renew Photovoltaics should request documentation directly from the manufacturer, including certifications, warranty terms, and manufacturing location, before treating it as comparable to a documented player like APsystems.

Generated by Claude Sonnet 5 · 2026-11-13

06

Other brand comparisons

Build your own
Manufacturers
APsystems A.B. Energy
Manufacturers
AE Solar Renew Photovoltaics
Manufacturers
APsystems AEET
Manufacturers
AIKO Renew Photovoltaics
Manufacturers
APsystems AKCOME
Manufacturers
ARTsolar Renew Photovoltaics
Something missing from a catalogue? Both lists are built from the datasheets in the database. If a model is absent, it has not been ingested yet.

Comparisons are computed from manufacturer datasheets held in the ComparePV database and may not reflect a brand's complete current lineup. Nothing on this page is paid placement.