Skip to main content

APsystems vs EGing PV - solar panel manufacturer comparison

APsystems
China Founded 2010
Read the APsystems review
VS
EGing PV
China Founded 2003 Tier 1
Read the EGing PV review
At a glance

EGing PV has the broader catalog (131 vs 0 models). EGing PV leans bifacial (39% of lineup).

Both catalogues are read from the manufacturers' own datasheets. A brand is not scored against the market here, only against the other brand on this page.

Panel models
0 131
Highest power
0 Wp 685 Wp
Best efficiency
- 22.4%
Average efficiency
- 20.9%
Bifacial share
0% 39%
Average warranty
- 27 yrs
01

The two companies

Company facts, not datasheet figures
APsystems

APsystems (Altenergy Power System, operating as Yuneng Technology) is a global manufacturer specializing in multi-module microinverters, energy storage systems, and rapid shutdown devices for residential and commercial solar installations. Founded in Silicon Valley in 2010 and now headquartered in China with a major...

Founded
2010
Headquarters
Jiaxing, China
Employees
500-1000
EGing PV
Founded
2003
Headquarters
Changzhou, China
Tier 1 bankable
Yes
02

Catalogue against catalogue

Averages over every model in the database
Metric APsystems EGing PV
Catalog & Power
Panel Models 0 131+131
Max Power 0 W 685 W+685 W
Avg Power 0 W 504 W+504 W
Efficiency
Max Efficiency - 22.45%
Avg Efficiency - 20.90%
Reliability & Warranty
Avg Temp Coefficient - -0.336%/°C
Bifacial Share 0 (0%) 51 (39%)+39 pp
Avg Warranty - 26.9 yrs

An average over a catalogue describes the range a manufacturer publishes, not the module you would buy. A brand with two flagship panels and eighty older ones averages worse than one that has retired its back catalogue.

03

What each of them builds

Cell technology across the market
Efficiency spread
Share of each catalogue in every efficiency band
Power spread
Share of each catalogue in every power band

EGing PV offers more 600W+ panels (22% of lineup)

APsystems cell technology
Share of their models by cell architecture
EGing PV cell technology
Share of their models by cell architecture

Dominant cell tech: PERC (76%)

04

The flagships

Highest-power models from each brand
APsystems all models
No panels from this manufacturer are in the database yet.
05

Written summary

Checking cache...

APsystems is a US-founded (Silicon Valley, around 2009-2010) electronics company with its manufacturing base in Jiaxing, China, and it is best known not for solar panels but for multi-module microinverters, such as the YC and DS3/QT2 series. It does not appear on BloombergNEF's Tier 1 module-maker lists because it is not a panel manufacturer. In 2025, Sinovoltaics ranked APsystems as the most bankable inverter company worldwide based on an Altman Z-score financial-health analysis, and the company extended its microinverter warranty to 25 years in North America. EGing PV, by contrast, is a Chinese module manufacturer listed on the Shanghai Stock Exchange (600537), headquartered in Changzhou, with cell and module lines covering PERC and TOPCon technology and roughly 9.5 GW of nameplate module capacity. EGing has historically appeared on BloombergNEF's Tier 1 list, though it has reported serious financial distress, including a 2024 net loss of about 288 million dollars, a 2025 module utilization rate near 35 percent, halted production at some facilities, and a creditor-driven restructuring that is shifting control to Solarspace. On institutional footprint, APsystems currently looks the more stable and better-regarded company, while EGing's Tier 1 status is clouded by its ongoing financial troubles.

Because the two companies occupy different product categories, direct comparison is limited. APsystems' microinverters are typically paired with third-party panels in residential and small commercial rooftop systems, valued for module-level power electronics, monitoring, and rapid-shutdown compliance. EGing's TOPCon and PERC modules are aimed at residential, commercial, and utility-scale installations, generally positioned as a mid-tier, price-competitive option in markets like Australia, where independent reviewers note lower upfront cost but mixed confidence relative to top-tier Chinese brands.

For a typical 2025-2026 buyer, these are not interchangeable products: APsystems should be evaluated purely as an inverter brand, where its bankability credentials are currently strong, while EGing should be evaluated as a panel brand with real due-diligence concerns given its reported losses and restructuring, making a financially healthier Tier 1 alternative generally the safer default.

Generated by Claude Sonnet 5 · 2026-11-09

06

Other brand comparisons

Build your own
Manufacturers
APsystems A.B. Energy
Manufacturers
AE Solar EGing PV
Manufacturers
APsystems AEET
Manufacturers
AIKO EGing PV
Manufacturers
APsystems AKCOME
Manufacturers
ARTsolar EGing PV
Something missing from a catalogue? Both lists are built from the datasheets in the database. If a model is absent, it has not been ingested yet.

Shop prices: See 3 EGing PV offers

Comparisons are computed from manufacturer datasheets held in the ComparePV database and may not reflect a brand's complete current lineup. Nothing on this page is paid placement.