Skip to main content

PS-M156(HCBF)-GG-590W

590 Wp PERC Bifacial 2500%
ComparePV verdict

Warranty pick, heavy for its output

Rank 5,790 of 14,005
Compare panels Datasheet PDF
Power (Wp)
590
Strong · top 17%
Efficiency (%)
21.06
Typical · median 21.29%
Density (Wp/m²)
210.6
Typical · median 212.9
Temp (%/°C)
-0.349
Typical · median -0.350
Weight (kg)
35.3
Weak · 4.5 kg above median
Warranty (yrs)
30
Strong · top 25%

The PS-M156(HCBF)-GG-xxxW series, part of Philadelphia Solar's PHENex lineup, is built for commercial, industrial, and utility-scale installations where maximizing output from every square meter of roof or ground space matters. The panel uses half-cut cells sized at 182 mm, which reduces losses from partial shading and microcracks while improving temperature coefficients compared to full-cell modules. The bifacial technology captures additional light reflected off the rear side of the panel, boosting total energy yield without increasing the footprint of the array. A construction based on double glass and an AL 6063-T5/6005-T6 aluminum frame delivers strong mechanical durability - the module withstands loads up to 5400 Pa on the front and 2400 Pa on the back, making it a solid choice for regions with heavy snow loads or strong winds. The 10-busbar layout lowers internal resistance and improves current collection across the cell. Backed by certified resistance to PID, salt mist, and ammonia, the panel performs reliably in demanding environments, including coastal areas and agricultural sites. Manufactured on automated robotic production lines in Jordan, it delivers consistent quality, while the long linear power warranty confirms low degradation over the module's lifetime.

Ranking

589 panels in the segment PERC 550-600 W
Metric This panel Median Position in segment Overall rank
Module efficiency 21.06% 21.29% Typical 9,625
Power density 210.6 212.9 Typical 9,610
Temperature coefficient -0.349 -0.350 Typical 10,404
Weight per kWp 59.8 52.7 Weak · bottom 8% 12,311
Performance warranty 30 yrs 27 yrs Strong · top 25% 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

6 positive · 3 caution
Best for

Commercial and utility-scale.

Not ideal for

Weight-limited structures.

Strengths
30 year performance warranty

Top 25% of the PERC 550-600 W segment, against a median of 27 yrs.

Watch-outs
59.8 kg per kWp

Bottom 8% of the PERC 550-600 W segment, against a median of 52.7. Ranked 12,311th in the whole database.

What owners get
182 mm half-cut cells + bifacial technology

Half-cut cells sized at 182 mm reduce losses from microcracks and partial shading while improving temperature coefficients versus full-cell modules. Bifacial light absorption captures additional rear-side energy, boosting yield per square meter without expanding the installation footprint.

Reinforced mechanical construction

Double glass and an AL 6063-T5/6005-T6 aluminum frame give the module a load rating of up to 5400 Pa front / 2400 Pa rear, above the typical market standard (2400/2400 Pa), making it well suited to sites with heavy snow loads or strong wind.

30-year linear power warranty

The manufacturer offers a 30-year power warranty alongside a 12-year product warranty - a term comparable to leading tier-1 manufacturers, improving project bankability and long-term yield predictability.

Resistance to harsh environmental conditions

PID, salt mist, and ammonia resistance certifications allow deployment in coastal installations and agricultural (agriPV) sites, where standard panels often suffer accelerated degradation.

Tier-1 manufacturer since 2007, robotic production

Philadelphia Solar is a tier-1 (bankable) manufacturer operating since 2007, with automated production lines in Jordan, ensuring consistent module quality and supporting bank financing for projects.

Trade-offs
Series discontinued

The PS-M156(HCBF)-GG-xxxW series launched in 2021 and was discontinued in 2024 (superseded by newer series, including PS-MNB144/156). This means limited availability of identical modules for expanding existing installations and potentially longer lead times for warranty claims.

Efficiency below current market benchmarks

Module efficiency (20.7-21.06%) trails comparable 590 Wp modules built on newer N-type cells, e.g., Talesun TM7G72M (22.8%), Horay Solar HS 182-144 TC-D Ocean (22.8%), and AE Solar HORIZON CMD-144BDS (22.86%) - a gap of roughly 1.8-2.2 percentage points that translates into a larger required installation area for the same capacity.

Notes from the database
  • At 21.1% efficiency, this panel is on par with typical PERC 550-600W modules
  • At 210.6 W/m² power density, roof space requirements are typical for PERC 550-600W panels
  • Temperature coefficient of -0.35%/°C matches the PERC 550-600W median
  • At 35.3 kg (4.5 kg above PERC 550-600W median of 30.8 kg), requires checking roof load capacity
  • #9625 for efficiency, #10404 for temperature performance out of 14005 panels

Specifications

Open datasheet PDF
Nominal power (Pmax) 590 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 21.06 % Typical Segment median 21.29%
Vmpp · Impp 45.74 V · 12.90 A Operating point at max power
Voc · Isc 54.60 V · 13.76 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 2471×1134×30 mm · 2.80 m² of roof
Weight 35.3 kg Weak Weak · 4.5 kg above median
Cells 156 · PERC Monocrystalline
Bifaciality 2500 % Rear output as a share of front
Coefficient Pmax -0.349 %/°C Typical median -0.350 of its segment
Coefficient Voc · Isc -0.267 · 0.049 %/°C
NOCT 45 °C At 800 W/m², 20 °C ambient
Product warranty 12 years Hardware defects only
Performance warranty 30 years Strong top 25% · median 27 yrs
End-of-warranty output 85.0 % Equals 501 W guaranteed
Degradation 2.00 → 0.45 % First year, then annual

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.349 %/°C against a segment median of -0.350
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Filter these
Size
Panel Power Eff. Temp. Weight Difference
Philadelphia Solar PS-M156(HCBF)-GG-590W 590 W 21.06% -0.349 35.3 kg You are here
LR7-60HVH-560M 560 W 24.80% -0.260 25.0 kg Cooler, lighter, +3.7 pp
AIKO-A640-MAE72Mw 640 W 24.80% -0.260 27.0 kg Cooler, lighter, +3.7 pp
LR7-60HVH-555M 555 W 24.60% -0.260 25.0 kg Cooler, lighter, +3.5 pp
AIKO-A635-MAE72Mw 635 W 24.60% -0.260 27.0 kg Cooler, lighter, +3.5 pp
AIKO-A630-MAH72Dw 630 W 24.40% -0.260 32.5 kg +40 W, cooler, +3.3 pp
LR7-60HVHL-550M 550 W 24.40% -0.260 16.3 kg Cooler, 19 kg lighter, +3.3 pp
PS-M156(HCBF)-GG-580W 580 W 20.70% -0.349 35.3 kg -10 W, -0.4 pp
PS-M156(HCBF)-GG-585W 585 W 20.88% -0.349 35.3 kg Very close match
PS-MNB156(HCBF)-630W 630 W 22.57% -0.290 32.5 kg +40 W, cooler, +1.5 pp
PS-MNB156(HCBF)-635W 635 W 22.75% -0.290 32.5 kg +45 W, cooler, +1.7 pp
PS-MNB156(HCBF)-640W 640 W 22.90% -0.290 32.5 kg +50 W, cooler, +1.8 pp
PS-MNB156(HCBF)-645W 645 W 23.08% -0.290 32.5 kg +55 W, cooler, +2.0 pp
PS-MNB156(HCBF)-650W 650 W 23.26% -0.290 32.5 kg +60 W, cooler, +2.2 pp
AIKO-A680-MDE72Mw 680 W 25.20% -0.260 29.0 kg +90 W, cooler, +4.1 pp
AIKO-A675-MDE72Mw 675 W 25.00% -0.260 29.0 kg +85 W, cooler, +3.9 pp
AIKO-A700-MAE78Dw 700 W 25.00% -0.260 34.5 kg +110 W, cooler, +3.9 pp

Found 577 panels of the same or similar size to this one, within ±10 mm. See them here Found 616 panels of the same or similar size to this one, within ±25 mm. See them here Found 616 panels of the same or similar size to this one, within ±50 mm. See them here Found 1813 panels of the same or similar size to this one, within ±100 mm. See them here

Common questions

6 answered
Is the PS-M156(HCBF)-GG-xxxW series by Philadelphia Solar still available for purchase?
The PS-M156(HCBF)-GG-xxxW series has been discontinued from active production and replaced by newer models in Philadelphia Solar's lineup. Availability is now limited to remaining distributor stock. Anyone expanding an existing installation built on this series should act quickly or consider replacement modules with similar power output and dimensions.
How does bifacial technology in the PS-M156(HCBF)-GG-xxxW panels differ from standard monofacial panels?
A bifacial panel captures energy not only through its front side but also through the rear side, using light reflected off the ground, roof, or snow. For the PS-M156(HCBF)-GG-xxxW series, this results in additional energy yield without increasing the installation's footprint, which is especially beneficial for ground-mounted solar farms with light-colored surfaces.
What warranty comes with the Philadelphia Solar PS-M156(HCBF)-GG-xxxW series?
The manufacturer offers a 12-year product warranty along with a 30-year linear power output warranty. This means the panel is expected to maintain its guaranteed performance level even after three decades of use, reflecting the low annual degradation of the half-cut PERC cells used in this series.
Can the PS-M156(HCBF)-GG-xxxW panels withstand heavy snow loads and strong wind?
Yes, thanks to the AL 6063-T5/6005-T6 aluminum frame and dual-glass construction, the module withstands a front load of up to 5400 Pa and a rear load of up to 2400 Pa. These ratings allow for safe installation in regions with heavy snowfall and strong winds, such as on farm and industrial rooftops.
What benefits do half-cut cells and 10 busbars provide in the PS-M156(HCBF)-GG-xxxW panel?
The 182 mm half-cut cells are split in half, reducing current losses and limiting the impact of partial shading and microcracks on overall module performance. The 10-busbar layout further lowers internal resistance and improves current collection, together delivering higher efficiency and better temperature coefficients compared to full-cell panels.
Are the PS-M156(HCBF)-GG-xxxW panels suitable for coastal installations or agricultural areas?
Yes, the series is certified for resistance to PID, salt mist, and ammonia exposure, making it a suitable choice for coastal installations exposed to salt corrosion as well as for solar farms in agricultural areas where ammonia fumes from livestock operations are present in the air.
Add to compare