Skip to main content
Luxen Solar Energy Brand review

LNET-695ND

695 Wp N-type Bifacial 2500%
ComparePV verdict

Middle of its segment, heavy for its output

Rank 1,117 of 14,005
Compare panels Datasheet PDF
Power (Wp)
695
Strong · top 5%
Efficiency (%)
22.37
Typical · median 23.30%
Density (Wp/m²)
223.7
Typical · median 233.2
Temp (%/°C)
-0.300
Weak · bottom 21%
Weight (kg)
38.5
Weak · 5.0 kg above median
Warranty (yrs)
30
Typical · median 30 yrs

The LUXPOWER N-Type 6 series from Luxen Solar Energy answers the growing demand from investors looking to maximize output on limited roof or ground space. The panels are built on TOPCon N-Type cells in the G12/210mm format, arranged in a half-cut layout across 132 cell tiles, which reduces current losses and improves resistance to microcracks and hot-spot effects. The bifacial design captures reflected irradiance from the ground surface, boosting real-world energy yield without increasing the installation footprint - a feature especially valued in commercial projects and utility-scale PV farms where every square meter counts. A low temperature coefficient and stable performance in high heat make this series well suited to warmer climates and high-irradiance sites. Thanks to lower degradation of N-Type cells compared to conventional PERC, the modules maintain high productivity throughout their service life, translating into a more favorable LCOE and faster return on investment. This is a solution for installers and investors who expect modern cell technology, high reliability, and long-term performance, regardless of project scale - from commercial installations to large-scale solar power plants.

Ranking

109 panels in the segment N-type 650-700 W
Metric This panel Median Position in segment Overall rank
Module efficiency 22.37% 23.30% Typical 4,970
Power density 223.7 233.2 Typical 4,877
Temperature coefficient -0.300 -0.290 Weak · bottom 21% 6,093
Weight per kWp 55.4 50.9 Weak · bottom 13% 9,818
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

5 positive · 3 caution
Best for

Utility-scale, commercial, hot-climate and shaded-installations.

Not ideal for

Weight-limited structures and hot climates.

Watch-outs
55.4 kg per kWp

Bottom 13% of the N-type 650-700 W segment, against a median of 50.9.

-0.300 %/°C temperature coefficient

Bottom 21% of the N-type 650-700 W segment, against a median of -0.290.

What owners get
N-Type TOPCon cells with half-cut technology

132 half-cut cells in G12/210mm format reduce current losses and improve resistance to microcracks and hot-spot effects, while lower LID/LeTID degradation compared to conventional PERC results in more stable energy yield over the module's lifetime.

Bifacial design boosts energy yield

The double-sided module design captures albedo radiation reflected from the ground without increasing installation footprint, which is particularly valuable in commercial and utility-scale PV projects where every square meter matters.

Efficiency up to 23.18%, on par with segment leaders

Maximum efficiency of 23.18% at up to 720 Wp places the series among top-tier N-Type solutions, alongside DMEGC (23.2%, 720 Wp) and Leapton (23.18%, 720 Wp) - the gap versus the best peers is practically negligible.

BNEF Tier-1 status since 2022

Luxen Solar Energy has operated since 2005 and has held BloombergNEF Tier-1 status since 2022, confirming manufacturer bankability and easing financing for commercial projects and PV farms.

30-year linear power warranty

The power warranty covers 30 years, matching the standard for modern N-Type modules and ensuring predictable, long-term energy output, favorably impacting project LCOE.

Trade-offs
15-year product warranty below the new premium standard

The standard product warranty is 15 years, whereas by 2026 some competing tier-1 series (e.g., JA Solar DeepBlue, Trina Vertex S+) already offer 25-year product warranties as standard. Extending the coverage period on Luxen modules requires purchasing an additional option.

Notes from the database
  • Module efficiency of 22.4% is 0.9pp below average for N-type 650-700W panels (median: 23.3%)
  • 223.7 W/m² power density is 9.5 W/m² below N-type 650-700W median (233.2 W/m²) - requires larger installation area
  • Temperature coefficient of -0.30%/°C matches the N-type 650-700W median
  • At 38.5 kg, this panel is 5.0 kg heavier than the N-type 650-700W median (33.5 kg) - more demanding for installation crews
  • In the top 35% for efficiency among all N-type panels

Specifications

Open datasheet PDF
Nominal power (Pmax) 695 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 22.37 % Typical Segment median 23.30%
Vmpp · Impp 40.03 V · 17.36 A Operating point at max power
Voc · Isc 48.15 V · 18.34 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 2384×1303×33 mm · 3.11 m² of roof
Weight 38.5 kg Weak Weak · 5.0 kg above median
Cells 132 · N-type Monocrystalline
Bifaciality 2500 % Rear output as a share of front
Coefficient Pmax -0.300 %/°C Weak bottom 21% of its segment
Coefficient Voc · Isc -0.240 · 0.040 %/°C
NOCT 45 °C At 800 W/m², 20 °C ambient
Product warranty 15 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 87.4 % Equals 607 W guaranteed
Degradation 1.00 → 0.40 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by Luxen Solar Energy in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 695 Wp appear here. The rest cover the whole series.

Linear Power Warranty Linear Power Warranty Whole series

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.300 %/°C against a segment median of -0.290
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Filter these
Size
Panel Power Eff. Temp. Weight Difference
Luxen Solar Energy LNET-695ND 695 W 22.37% -0.300 38.5 kg You are here
AIKO-A650-MAE72Mw 650 W 25.20% -0.260 27.0 kg -45 W, lighter, +2.8 pp
AIKO-A680-MDE72Mw 680 W 25.20% -0.260 29.0 kg Cooler, lighter, +2.8 pp
AIKO-A675-MDE72Mw 675 W 25.00% -0.260 29.0 kg Cooler, lighter, +2.6 pp
AIKO-A645-MAE72Mw 645 W 25.00% -0.260 27.0 kg -50 W, lighter, +2.6 pp
AIKO-A700-MAE78Dw 700 W 25.00% -0.260 34.5 kg Cooler, lighter, +2.6 pp
AIKO-A695-MAE78Dw 695 W 24.90% -0.260 34.5 kg Cooler, lighter, +2.5 pp
AIKO-G670-MCH72Mw 670 W 24.80% -0.260 28.2 kg Cooler, lighter, +2.4 pp
LNET-655M 655 W 21.09% -0.340 34.0 kg Lighter, -1.3 pp, -5 yr warranty
LNET-660M 660 W 21.25% -0.340 34.0 kg Lighter, -1.1 pp, -5 yr warranty
LNET-665M 665 W 21.41% -0.340 34.0 kg Lighter, -1.0 pp, -5 yr warranty
LNET-670M 670 W 21.60% -0.340 34.0 kg Hotter, lighter, -5 yr warranty
LNET-675M 675 W 21.73% -0.340 34.0 kg Hotter, lighter, -5 yr warranty
LNET-685N 685 W 22.05% -0.290 34.0 kg Cooler, lighter, -0.3 pp
LNET-690N 690 W 22.21% -0.290 34.0 kg Cooler, lighter
AIKO-A805-GRH78Dw 805 W 25.10% -0.260 39.8 kg +110 W, cooler, +2.7 pp
AIKO-A800-GRH78Dw 800 W 24.90% -0.260 39.8 kg +105 W, cooler, +2.5 pp

Found 1390 panels of the same or similar size to this one, within ±10 mm. See them here Found 1400 panels of the same or similar size to this one, within ±25 mm. See them here Found 1400 panels of the same or similar size to this one, within ±50 mm. See them here Found 1432 panels of the same or similar size to this one, within ±100 mm. See them here

Common questions

6 answered
How do N-Type TOPCon cells in the LUXPOWER N-Type 6 differ from classic PERC cells?
N-Type TOPCon cells offer lower annual degradation and better high-temperature performance than classic PERC. As a result, LUXPOWER N-Type 6 panels maintain higher productivity throughout their lifespan, translating into better LCOE and a faster return on investment, particularly in commercial projects and PV farms.
Is it worth paying extra for bifacial technology in the LUXPOWER N-Type 6 panels?
Yes, if the installation has a bright, reflective surface (such as white gravel or a membrane roof) or is mounted on a ground-mount structure with adequate clearance. The bifacial design captures reflected radiation from the ground, boosting real energy yield without increasing the installation footprint - the extra annual energy gain can often reach several percent.
What is the maximum power of LUXPOWER N-Type 6 panels and how many modules are needed for a 10 kWp system?
The maximum output in the LUXPOWER N-Type 6 series is 720 Wp per module. At that power level, roughly 14 panels are needed for a 10 kWp system, significantly reducing the required roof or ground area compared to older, less efficient modules.
What warranty does Luxen Solar Energy offer on LUXPOWER N-Type 6 panels?
The manufacturer provides a 15-year product warranty along with a 30-year linear power output warranty. This means long-term protection against both manufacturing defects and excessive power degradation, which is an important factor when calculating the investment's profitability.
Do LUXPOWER N-Type 6 panels perform well in hot climates and high irradiance conditions?
Yes, N-Type TOPCon technology has a low temperature coefficient and stable performance at high temperatures, resulting in smaller power losses during heat waves compared to classic PERC panels. This makes the series well suited to regions with high irradiance and elevated ambient temperatures.
Does the half-cut technology in the LUXPOWER N-Type 6 improve shading tolerance and resistance to microcracks?
Yes, cells split into 132 half-cut tiles reduce current losses caused by partial shading and increase resistance to microcracks and the hot-spot effect. This gives the panel more stable performance under uneven illumination, such as shadows cast by chimneys or neighboring buildings.
Add to compare