Skip to main content

JA Solar NS-650MH-132

650 Wp N-type
ComparePV verdict

Solid all-round for its segment

Rank 930 of 14,129
Compare panels Datasheet PDF
Power (Wp)
650
Weak · bottom 12%
Efficiency (%)
24.06
Typical · median 23.31%
Density (Wp/m²)
240.6
Typical · median 233.2
Temp (%/°C)
-0.290
Typical · median -0.290
Weight (kg)
34.0
Typical · median 33.5 kg
Warranty (yrs)
30
Typical · median 30 yrs

The JA Solar Monocrystalline 132 series consists of modules designed to operate reliably in installations with high requirements, from commercial rooftops to PV farms. A key advantage is the arrangement of 132 cells in combination with a modern module architecture, which helps to minimize internal losses and better utilize energy, even when conditions are not ideal. You will experience improved performance in low-light conditions, which effectively supports energy generation in the morning, evening, and cloudy weather.

Variants based on N-type TOPCon technology stand out with their low susceptibility to light-induced degradation, while the dual-layer structure increases resistance to environmental factors and facilitates long-term parameter maintenance. Furthermore, the availability of bifacial (two-sided) solutions allows for increased energy production through back-side illumination - particularly on bright roofs, ground surfaces, and in projects with reflective substrates. This is the choice for investors who want to maximize the profitability and predictability of their installations without compromising on quality.

Ranking

110 panels in the segment N-type 650-700 W
Metric This panel Median Position in segment Overall rank
Module efficiency 24.06% 23.31% Typical 290
Power density 240.6 233.2 Typical 255
Temperature coefficient -0.290 -0.290 Typical 2,220
Weight per kWp 52.3 51.0 Typical 5,814
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

5 positive · 2 caution
Best for

Commercial and utility-scale.

What owners get
N-type TOPCon Technology

N-type cells eliminate the boron-oxygen complex mechanism, reducing first-year LID to ~0.26% vs. ~1.92% for PERC modules. Annual degradation ≤0.4% (vs. ≥0.55% for PERC) translates into meaningfully higher cumulative energy yield over the 30-year system lifetime.

Up to 24.06% Efficiency

The top variant (650 Wp) achieves 24.06% module efficiency - matching segment leader Jinko Solar Tiger Neo 66HL4M-BDX and outperforming Astronergy ASTRO N5 (23.3%) and BYD AURO N (23.25%) from the peer comparable set. Five power variants (610-650 Wp) simplify design optimization under area constraints.

132 Half-Cut Cell Layout

The 132 half-cut cell configuration halves per-string current, reducing resistive losses (proportional to I²R) and improving partial-shading tolerance. Smaller cell dimensions also lower thermal stress on solder joints, supporting long-term mechanical reliability.

15-Year Product Warranty

The materials-and-workmanship warranty stands at 15 years - 3 years longer than the newer JA Solar JAM66D45-LB series (12 years) and well above the 10-12 year industry standard. Combined with a 30-year linear power warranty, it provides strong downside protection across the full projected asset life.

BNEF Tier-1 Manufacturer

JA Solar has maintained continuous BNEF Tier-1 bankability status since 2012 and reported manufacturing capacity exceeding 100 GW/yr as of Q2 2025. Tier-1 status enables non-recourse project financing and supports long-term service availability throughout the warranty period.

Trade-offs
Discontinued Series (2019-2023)

Manufacturing ceased in 2023; module availability is limited to existing distributor inventory. The lack of ongoing production complicates system expansions requiring matched modules, and over a 30-year power warranty horizon raises the risk of limited access to technical support and compatible replacements.

Monofacial Only - No Bifacial Option

The series is strictly monofacial, while all three peer comparables (Astronergy ASTRO N5, BYD AURO N NLBK-39, Jinko Tiger Neo 66HL4M-BDX) feature bifacial designs capable of 5-20% additional rear-side energy gain. The absence of a bifacial variant reduces LCOE competitiveness in ground-mount and flat-roof installations with reflective albedo surfaces.

Notes from the database
  • Efficiency of 24.1% is 0.8pp above the N-type 650-700W median (23.3%)
  • Power density of 240.6 W/m² packs 7.4 W/m² more into the same footprint vs N-type 650-700W median (233.2 W/m²)
  • At -0.29%/°C, hot weather performance is typical for N-type 650-700W panels
  • In the top 2% for efficiency among all N-type panels

Specifications

Open datasheet PDF
Nominal power (Pmax) 650 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 24.06 % Typical Segment median 23.31%
Vmpp · Impp 41.58 V · 15.64 A Operating point at max power
Voc · Isc 49.92 V · 16.27 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 2382×1134×30 mm · 2.70 m² of roof
Weight 34.0 kg Typical Typical · median 33.5 kg
Cells 132 · N-type Monocrystalline
Coefficient Pmax -0.290 %/°C Typical median -0.290 of its segment
Coefficient Voc · Isc -0.250 · 0.045 %/°C
NOCT 45 °C At 800 W/m², 20 °C ambient
Product warranty 15 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs

Datasheet charts

Open datasheet PDF

Measured curves published by JA Solar in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 650 Wp appear here. The rest cover the whole series.

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.290 %/°C against a segment median of -0.290
-
Filter these
Size
Panel Power Eff. Temp. Weight Difference
JA Solar NS-650MH-132 650 W 24.06% -0.290 34.0 kg You are here
AIKO-A650-MAE72Mw 650 W 25.20% -0.260 27.0 kg Cooler, lighter, +1.1 pp
AIKO-A680-MDE72Mw 680 W 25.20% -0.260 29.0 kg +30 W, lighter, +1.1 pp
AIKO-A675-MDE72Mw 675 W 25.00% -0.260 29.0 kg Cooler, lighter, +0.9 pp
AIKO-A645-MAE72Mw 645 W 25.00% -0.260 27.0 kg Cooler, lighter, +0.9 pp
AIKO-A700-MAE78Dw 700 W 25.00% -0.260 34.5 kg +50 W, cooler, +0.9 pp
WST-675BKX72-A2 675 W 25.00% -0.260 32.1 kg +25 W, cooler, +0.9 pp
AIKO-A695-MAE78Dw 695 W 24.90% -0.260 34.5 kg +45 W, cooler, +0.8 pp
AIKO-G670-MCH72Mw 670 W 24.80% -0.260 28.2 kg Cooler, lighter, +0.7 pp
JAM66D45-605/LB 605 W 22.40% -0.290 33.1 kg -45 W, -1.7 pp
JAM66D45-610/LB 610 W 22.60% -0.290 33.1 kg -40 W, -1.5 pp
JAM66D45-615/LB 615 W 22.80% -0.290 33.1 kg -35 W, -1.3 pp
JAM66D45-620/LB 620 W 23.00% -0.290 33.1 kg -30 W, -1.1 pp
JAM66D45-625/LB 625 W 23.10% -0.290 33.1 kg -25 W, -1.0 pp
JAM66D45-630/LB 630 W 23.30% -0.290 33.1 kg -20 W, -0.8 pp
JAM66D45-635/LB 635 W 23.50% -0.290 33.1 kg -15 W, -0.6 pp
LR7-72HVHF-670M 670 W 24.80% -0.260 28.5 kg Cooler, lighter, +0.7 pp

Found 1144 panels of the same or similar size to this one, within ±10 mm. See them here Found 1150 panels of the same or similar size to this one, within ±25 mm. See them here Found 1261 panels of the same or similar size to this one, within ±50 mm. See them here Found 1942 panels of the same or similar size to this one, within ±100 mm. See them here

About the Monocrystalline 132 series

6 answered

These answers cover the whole series. Where a figure differs, the specification above is this module's own.

Is the JA Solar Monocrystalline 132 series still available for purchase?
The JA Solar Monocrystalline 132 series has been discontinued and is no longer actively distributed through authorized JA Solar partners. Residual stock may still exist at some wholesale distributors, but availability is limited. Before purchasing, check current inventory levels and consider newer JA Solar series that offer comparable or improved specifications.
What warranty does the JA Solar Monocrystalline 132 series carry?
JA Solar provides a 15-year product warranty and a 30-year linear power output warranty on the Monocrystalline 132 series. The linear power guarantee ensures the module stays above the declared degradation threshold for three decades. Since the series is discontinued, keeping purchase documentation is especially important for any future warranty claims.
What is N-type TOPCon technology in the JA Solar Monocrystalline 132 and is it worth the premium?
N-type TOPCon cells exhibit very low light-induced degradation (LID), resulting in more stable output over the full system lifetime compared to P-type PERC modules. For commercial installations with a 15-year or longer payback horizon, this translates into measurably higher energy yields and more predictable LCOE. The technology also improves low-irradiance performance, which compounds the long-term advantage.
How does the JA Solar Monocrystalline 132 perform in low-light and overcast conditions?
The 132-cell layout and optimized module architecture reduce internal losses at low irradiance levels, improving performance during early morning, late evening, and cloudy days relative to conventional 60- or 72-cell modules. This is particularly relevant in Central European climates, where a significant portion of annual energy yield is generated under diffuse irradiance conditions.
Are the JA Solar Monocrystalline 132 panels suitable for large commercial and utility-scale PV projects?
Yes, the Monocrystalline 132 series with up to 650 Wp per module is engineered for commercial rooftop and utility-scale applications. The high per-unit power rating reduces module count per project, lowering BoS and labor costs. The dual-glass construction adds mechanical durability and simplifies long-term O&M on large rooftop arrays and ground-mounted PV farms.
Is JA Solar a Tier 1 manufacturer and can buyers trust the brand?
Yes, JA Solar holds Tier 1 status according to independent industry assessments, meeting strict financial stability and manufacturing quality criteria. The company ranks among the world's top PV module manufacturers by shipment volume. Tier 1 classification is also a standard requirement for project financing acceptance by banks and lenders in commercial and utility-scale PV development.
Add to compare