Middle of its segment, weak in heat
The HD Solar HD-N-G12 132 half-cell series utilizes monocrystalline N-type TOPCon cells, designed to maximize energy yield under real-world operating conditions. The use of a 132 half-cell arrangement minimizes losses due to microcracks and reduces the risk of power drops in partially shaded conditions - which is particularly important on roofs with skylights, chimneys, or installations near trees. The bifacial design further allows for the utilization of reflected light from the ground, improving production, especially on bright roofs and in PV farms. A key advantage of this series is its stable performance at high temperatures, which translates to more predictable results in the summer. The series is also complemented by a long product warranty, which supports investment security. HD-N-G12 132 half-cell is a good choice for companies, agriculture, and large ground-mounted installations where high power density, reliability, and lower system cost per watt are important.
Ranking
Signals from the data
Commercial, utility-scale, shaded-installations and hot-climate.
Hot climates and weight-limited structures.
Bottom 19% of the TOPCon 600-650 W segment, against a median of -0.290.
Bottom 22% of the TOPCon 600-650 W segment, against a median of 53.1.
The top of the series (23.5% at 635 Wp) matches the LONGi Hi-MO X10 Explorer (23.5%) directly and is only 0.01 percentage points below the Sunpro TOPCon 210R BIFACIAL (23.51%), placing the HD-N-G12 132 firmly among the leaders in its comparable power segment.
N-type TOPCon cells exhibit resistance to LID and LeTID and annual degradation of ≤0.4%, whereas PERC modules degrade at 0.6–0.8%/year. Over a 30-year installation lifetime, this translates into several percentage points of genuinely higher cumulative energy yield.
The manufacturer provides a 30-year linear power warranty — longer than the Talesun TM7G78M (BIPRO), which carries a standard 25-year term. For externally financed utility-scale PV projects, a longer warranty horizon directly reduces investment risk.
The bifacial construction enables an additional 5–15% energy gain from ground-reflected irradiance (light gravel, white roofing membrane, snow), while the 132 half-cut cell layout reduces resistive losses and improves performance under partial shading compared to full-cell configurations.
Seven variants spanning 605–635 Wp allow precise string sizing to match roof or field conditions without the need for power optimizers. This is a significant advantage when designing larger agricultural and commercial PV installations.
HD Solar does not appear on the BNEF Tier-1 bankable manufacturers list (confirmed Q1 2026), unlike LONGi Solar, which is present among peer comparables. This limits the availability of non-recourse bank financing for large-scale utility PV projects and may reduce module acceptability for institutional investors requiring bankability verification.
- Efficiency of 22.6% matches the TOPCon 600-650W median
- Power density of 225.8 W/m² matches the TOPCon 600-650W median
- Temperature coefficient of -0.30%/°C matches the TOPCon 600-650W median
- Bifaciality factor of 80% can add 4-12% extra yield with reflective mounting surface
- In the top 26% for efficiency among all TOPCon panels
Specifications
Datasheet charts
Measured curves published by HD Solar in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 610 Wp appear here. The rest cover the whole series.
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.
Alternatives
Found 1119 panels of the same or similar size to this one, within ±10 mm. See them here Found 1125 panels of the same or similar size to this one, within ±25 mm. See them here Found 1236 panels of the same or similar size to this one, within ±50 mm. See them here Found 1917 panels of the same or similar size to this one, within ±100 mm. See them here