Skip to main content
Goldi Solar G12 Series 700Wp

Goldi Solar G12 Series 700Wp

700 Wp HJT Bifacial 80%
ComparePV verdict

Middle of its segment, needs the roof space

Rank 1,212 of 14,129
Compare panels Datasheet PDF
Power (Wp)
700
Weak · bottom 8%
Efficiency (%)
22.53
Weak · bottom 11%
Density (Wp/m²)
225.3
Weak · bottom 8%
Temp (%/°C)
-0.259
Typical · median -0.240
Weight (kg)
38.7
Weak · bottom 11%
Warranty (yrs)
30
Typical · median 30 yrs

The HELOC Plus G12 series from Goldi Solar is built on heterojunction (HJT) technology with bifacial half-cut cells and a 12-busbar current-collecting grid, delivering high conversion efficiency and stable performance under demanding operating conditions. By harvesting energy from the rear side of the module, these panels generate an additional energy yield even from diffuse light reflected off the ground, making them especially attractive for ground-mount installations, agrivoltaic projects, and flat roofs where maximizing the use of available surface area matters most. The advanced N-type silicon structure combined with a textured glass coating ensures excellent low-light performance, so the modules maintain high productivity in the early morning, evening hours, and on overcast days. The series also stands out for its strong resistance to potential-induced degradation (PID) and a certified IP68 junction box enclosure, which minimizes the risk of failure in humid and variable climates. A low annual degradation rate paired with a robust mechanical design helps lower LCOE and shorten payback periods. This is a solution designed for commercial, industrial, and agricultural investors who expect long-term reliability and maximum energy output from every square meter of installed capacity.

Ranking

222 panels in the segment HJT 700-750 W
Metric This panel Median Position in segment Overall rank
Module efficiency 22.53% 23.02% Weak · bottom 11% 4,041
Power density 225.3 230.2 Weak · bottom 8% 4,048
Temperature coefficient -0.259 -0.240 Typical 484
Weight per kWp 55.3 53.6 Weak · bottom 11% 9,815
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

5 positive · 5 caution
Best for

Utility-scale, commercial, agrivoltaic and shaded-installations.

Not ideal for

Roofs where every square metre has to count, tight roof space and weight-limited structures.

Watch-outs
225.3 watts per square metre

Bottom 8% of the HJT 700-750 W segment, against a median of 230.2. Ranked 4,048th in the whole database.

22.53% module efficiency

Bottom 11% of the HJT 700-750 W segment, against a median of 23.02%.

55.3 kg per kWp

Bottom 11% of the HJT 700-750 W segment, against a median of 53.6.

What owners get
HJT technology with bifacial cells

N-type half-cut heterojunction cells with 12 busbars deliver efficiency up to 22.85%, while bifacial energy generation captures reflected light for additional yield - particularly valuable in ground-mount and flat-roof installations.

30-year power warranty

The linear power warranty covers 30 years, matching the standard set by leading Tier-1 peers (Heliene, Talesun, Tongwei) and supporting lower LCOE and greater ROI certainty over the long term.

Tier-1 status per BNEF

Goldi Solar is listed as a Tier-1 bankable manufacturer by Bloomberg New Energy Finance, easing access to non-recourse project financing for commercial and industrial installations using this series.

High PID resistance and IP68 sealing

Strong resistance to potential-induced degradation (PID) combined with certified IP68 junction box sealing minimizes failure risk in humid, variable climates, reducing lifecycle service costs.

Strong low-light performance

N-type silicon structure and textured glass coating maintain high productivity in morning, evening, and overcast conditions, boosting real-world annual yield compared to older-generation PERC panels.

Trade-offs
Efficiency slightly below segment leaders

Peak efficiency of 22.85% is marginally lower than comparable HJT/TOPCon competitors - Heliene 132HC G12 HJT (22.86%), Talesun TM8G66M (22.9%), and Tongwei TNC (22.9%). The gap is minor but could matter for space-constrained roof projects.

Shorter product warranty than some peers

The 12-year materials and workmanship warranty is standard, but some HJT manufacturers now offer 15-25 year product warranties, which may be a key differentiator when comparing offers for long-horizon commercial projects.

Notes from the database
  • Efficiency of 22.5% matches the HJT 700-750W median
  • At 225.3 W/m², this panel generates 4.9 W/m² less per unit area than HJT 700-750W median (230.2 W/m²)
  • Temperature coefficient of -0.26%/°C matches the HJT 700-750W median
  • 80% bifaciality enables rear-side power generation, boosting yield by 4-12% on reflective surfaces
  • #4041 for efficiency, #484 for temperature performance out of 14129 panels

Specifications

Open datasheet PDF
Nominal power (Pmax) 700 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 22.53 % Weak Segment median 23.02%
Vmpp · Impp 43.21 V · 16.23 A Operating point at max power
Voc · Isc 49.17 V · 17.31 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 2384×1303×35 mm · 3.11 m² of roof
Weight 38.7 kg Weak Weak · bottom 11%
Cells 132 · HJT Monocrystalline
Bifaciality 80 % Rear output as a share of front
Coefficient Pmax -0.259 %/°C Typical median -0.240 of its segment
Coefficient Voc · Isc -0.234 · 0.033 %/°C
NOCT 43 °C At 800 W/m², 20 °C ambient
Product warranty 12 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 83.5 % Equals 585 W guaranteed
Degradation 2.00 → 0.50 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by Goldi Solar in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 700 Wp appear here. The rest cover the whole series.

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.259 %/°C against a segment median of -0.240
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Alternatives

All Goldi Solar panels
Filter these
Size
Panel Power Eff. Temp. Weight Difference
Goldi Solar G12 Series 700Wp 700 W 22.53% -0.259 38.7 kg You are here
AIKO-A650-MAE72Mw 650 W 25.20% -0.260 27.0 kg -50 W, lighter, +2.7 pp
AIKO-A680-MDE72Mw 680 W 25.20% -0.260 29.0 kg -20 W, lighter, +2.7 pp
AIKO-A675-MDE72Mw 675 W 25.00% -0.260 29.0 kg -25 W, lighter, +2.5 pp
AIKO-A700-MAE78Dw 700 W 25.00% -0.260 34.5 kg Lighter, +2.5 pp
WST-675BKX72-A2 675 W 25.00% -0.260 32.1 kg -25 W, lighter, +2.5 pp
AIKO-A695-MAE78Dw 695 W 24.90% -0.260 34.5 kg Lighter, +2.4 pp
AIKO-G670-MCH72Mw 670 W 24.80% -0.260 28.2 kg -30 W, lighter, +2.3 pp
LR7-72HVHF-670M 670 W 24.80% -0.260 28.5 kg -30 W, lighter, +2.3 pp
G12 Series 680Wp 680 W 21.89% -0.259 38.7 kg -20 W, -0.6 pp
G12 Series 685Wp 685 W 22.05% -0.259 38.7 kg -15 W, -0.5 pp
GS12-T132-GF-690 690 W 22.21% -0.280 38.1 kg -10 W, hotter, -0.3 pp
GS12-T132-GF-695 695 W 22.37% -0.280 38.1 kg Hotter
GS12-T132-GF-705 705 W 22.69% -0.280 38.1 kg Hotter
AIKO-A805-GRH78Dw 805 W 25.10% -0.260 39.8 kg +105 W, heavier, +2.6 pp
AIKO-A800-GRH78Dw 800 W 24.90% -0.260 39.8 kg +100 W, heavier, +2.4 pp
AIKO-A795-GRH78Dw 795 W 24.80% -0.260 39.8 kg +95 W, heavier, +2.3 pp

Found 1393 panels of the same or similar size to this one, within ±10 mm. See them here Found 1403 panels of the same or similar size to this one, within ±25 mm. See them here Found 1403 panels of the same or similar size to this one, within ±50 mm. See them here Found 1435 panels of the same or similar size to this one, within ±100 mm. See them here

About the HELOC PLUS G12 Series series

6 answered

These answers cover the whole series. Where a figure differs, the specification above is this module's own.

What is the maximum power output of the Goldi Solar HELOC Plus G12 modules?
The HELOC Plus G12 series reaches up to 710 Wp per module. This is achieved through HJT heterojunction technology combined with half-cut bifacial cells and a 12-busbar current path grid. The high per-module power output reduces the number of panels needed to hit a target system size, lowering mounting structure and cabling costs.
How does HJT technology differ from conventional PERC cells?
HJT (heterojunction) combines crystalline silicon with amorphous layers, delivering higher conversion efficiency and better operating characteristics than PERC cells. Thanks to N-type silicon and a textured glass coating, HELOC Plus G12 modules maintain high output even in low-light conditions such as mornings, evenings, or overcast days, when conventional PERC panels lose efficiency.
Does bifacial design make sense for flat-roof installations with HELOC Plus G12?
Yes, this is one of the series' key use cases. The rear side of the module captures light reflected off a bright roof or ground surface, generating extra energy yield without increasing installation footprint. These panels perform especially well on flat roofs, ground-mount systems, and agrivoltaic installations, where maximizing output per square meter matters most.
What warranty does Goldi Solar offer on the HELOC Plus G12 panels?
The manufacturer provides a 12-year product warranty and a 30-year power performance warranty. Goldi Solar holds Tier 1 manufacturer status, indicating solid financial standing and a realistic ability to honor warranty commitments long term. A low annual degradation rate also contributes to higher energy yield throughout the module's lifespan.
Are HELOC Plus G12 panels resistant to moisture and harsh climate conditions?
Yes, the series features an IP68-certified junction box enclosure and high resistance to potential-induced degradation (PID). These characteristics minimize failure risk for installations exposed to humid, variable climates, which matters for both ground-mount and rooftop systems facing significant temperature and humidity swings.
Which installers and investors is the HELOC Plus G12 series designed for?
The series primarily targets commercial, industrial, and agricultural investors who expect long-term reliability and maximum energy yield per square meter of installed area. High per-module power, robust mechanical construction, and a lower LCOE make it well-suited to large-scale projects where faster investment payback is a priority.
Add to compare