Skip to main content
AE Solar AE CMEQ-66BDS-655

AE Solar AE CMEQ-66BDS-655

655 Wp TOPCon Bifacial 85%
ComparePV verdict

Strong in heat, no clear weak spot

Rank 688 of 14,129
Compare panels Datasheet PDF
Power (Wp)
655
Typical for its class
Efficiency (%)
24.25
Strong · top 11%
Density (Wp/m²)
242.5
Strong · top 12%
Temp (%/°C)
-0.260
Strong · top 8%
Weight (kg)
32.2
Strong · 2.4 kg below median
Warranty (yrs)
30
Typical · median 30 yrs

The METEOR CMEQ-66BDS series brings quarter-cut cell technology to the market, reducing resistive losses even further than the now-common half-cut design and translating into higher energy yield from every square meter of roof or ground-mounted array. The modules rely on next-generation n-type TOPCon cells, delivering stronger performance under diffuse light and at elevated operating temperatures - a real advantage in Poland's variable-irradiance climate. Thanks to a bifacial double-glass construction, the panels also capture reflected light on the rear side, boosting total system output without increasing the installation's footprint. This makes the series particularly attractive for utility-scale solar farm developers and large commercial installations, where every fraction of efficiency matters and LCOE optimization is a priority over decades of operation. A rugged anodized-aluminum frame combined with high snow and wind load resistance makes the series suitable for demanding mounting conditions as well. A long-term 30-year performance warranty further protects the investment, setting CMEQ-66BDS apart from monofacial modules and older PERC-generation competitors.

Ranking

254 panels in the segment TOPCon 650-700 W
Metric This panel Median Position in segment Overall rank
Module efficiency 24.25% 22.40% Strong · top 11% 190
Power density 242.5 223.7 Strong · top 12% 192
Temperature coefficient -0.260 -0.290 Strong · top 8% 515
Weight per kWp 49.2 53.1 Strong · top 16% 2,782
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

8 positive · 1 caution
Best for

Commercial, utility-scale and agrivoltaic.

Strengths
-0.260 %/°C temperature coefficient

Top 8% of the TOPCon 650-700 W segment, against a median of -0.290. Ranked 515th in the whole database.

24.25% module efficiency

Top 11% of the TOPCon 650-700 W segment, against a median of 22.40%.

242.5 watts per square metre

Top 12% of the TOPCon 650-700 W segment, against a median of 223.7.

What owners get
Up to 24.8% efficiency - segment leader

CMEQ-66BDS efficiency (24.06-24.8%) is markedly higher than direct peer comparables at the same 670 Wp max power - Hiwatt HW-M12/132H (21.6%), Techwise Summit (21.57%) and Resun RS9H-M (21.57%). A gap of roughly 3 percentage points means a materially smaller array footprint for the same installed power.

Quarter-cut N-type TOPCon cells

Quarter-cut cell segmentation further reduces resistive losses compared to common half-cut designs, while N-type TOPCon delivers lower LID/LeTID degradation and better high-temperature performance than the older PERC cells used by the peer comparables.

Bifacial double-glass construction

Double-glass bifacial design captures additional energy from rear-side reflected light without increasing installation footprint, which is particularly relevant for utility-scale PV farms and large commercial installations optimizing LCOE.

30-year power warranty, Tier-1 manufacturer

A 30-year performance warranty paired with a 15-year product warranty exceeds the market standard (typically 25/12 years). AE Solar is a German Tier-1, BNEF-bankable manufacturer operating since 2003, further reducing project financing risk.

Mechanically robust anodized aluminum frame

A solid anodized aluminum frame and high declared snow and wind load resistance make the series suitable for demanding mounting conditions, including the Polish climate.

Trade-offs
Limited public documentation availability

A direct datasheet for the CMEQ-66BDS variant could not be located on AE Solar's official resources (api.ae-solar.com) - only datasheets for related Meteor series (CMER-96BDS 440-460W, CMER-132BDS 610-630W) are indexed, making independent verification of parameters harder for integrators and investors.

Notes from the database
  • At 24.2% efficiency, this panel is 1.9pp above typical TOPCon 650-700W modules (median: 22.4%)
  • At 242.5 W/m² power density, this panel generates 18.8 W/m² more per unit area than TOPCon 650-700W median (223.7 W/m²)
  • At -0.26%/°C (vs median -0.29%/°C), loses ~1% less power in hot conditions
  • 32.2 kg weight - 2.4 kg lighter than TOPCon 650-700W median (34.6 kg), reducing installation effort
  • Bifacial design (85% factor) captures reflected light - adds 4-13% yield on ground-mount or white roof

Specifications

Open datasheet PDF
Nominal power (Pmax) 655 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 24.25 % Strong Segment median 22.40%
Vmpp · Impp 42.73 V · 15.33 A Operating point at max power
Voc · Isc 50.46 V · 16.04 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 2382×1134×30 mm · 2.70 m² of roof
Weight 32.2 kg Strong Strong · 2.4 kg below median
Cells 264 · TOPCon Monocrystalline
Bifaciality 85 % Rear output as a share of front
Coefficient Pmax -0.260 %/°C Strong top 8% of its segment
Coefficient Voc · Isc -0.240 · 0.046 %/°C
NOCT 41 °C At 800 W/m², 20 °C ambient
Product warranty 15 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 88.8 % Equals 582 W guaranteed
Degradation 1.00 → 0.35 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by AE Solar in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 655 Wp appear here. The rest cover the whole series.

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.260 %/°C against a segment median of -0.290
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Filter these
Size
Panel Power Eff. Temp. Weight Difference
AE Solar AE CMEQ-66BDS-655 655 W 24.25% -0.260 32.2 kg You are here
AIKO-A650-MAE72Mw 650 W 25.20% -0.260 27.0 kg Lighter, +0.9 pp
AIKO-A680-MDE72Mw 680 W 25.20% -0.260 29.0 kg +25 W, lighter, +0.9 pp
AIKO-A675-MDE72Mw 675 W 25.00% -0.260 29.0 kg +20 W, lighter, +0.8 pp
AIKO-A645-MAE72Mw 645 W 25.00% -0.260 27.0 kg -10 W, lighter, +0.8 pp
AIKO-A700-MAE78Dw 700 W 25.00% -0.260 34.5 kg +45 W, heavier, +0.8 pp
WST-675BKX72-A2 675 W 25.00% -0.260 32.1 kg +20 W, +0.8 pp
AIKO-A695-MAE78Dw 695 W 24.90% -0.260 34.5 kg +40 W, heavier, +0.6 pp
AIKO-G670-MCH72Mw 670 W 24.80% -0.260 28.2 kg +15 W, lighter, +0.6 pp
AE CMER-88BD-410 410 W 15.19% -0.290 33.7 kg -245 W, hotter, -9.1 pp
AE CMER-88BD-415 415 W 15.38% -0.290 33.7 kg -240 W, hotter, -8.9 pp
AE CMER-88BD-420 420 W 15.56% -0.290 33.7 kg -235 W, hotter, -8.7 pp
AE CMER-88BD-425 425 W 15.75% -0.290 33.7 kg -230 W, hotter, -8.5 pp
AE CMER-88BD-430 430 W 15.93% -0.290 33.7 kg -225 W, hotter, -8.3 pp
CMER-132BDS-610 610 W 22.60% -0.290 33.7 kg -45 W, hotter, -1.6 pp
CMER-132BDS-615 615 W 22.79% -0.290 33.7 kg -40 W, hotter, -1.5 pp
LR7-72HVHF-670M 670 W 24.80% -0.260 28.5 kg +15 W, lighter, +0.6 pp

Found 1144 panels of the same or similar size to this one, within ±10 mm. See them here Found 1150 panels of the same or similar size to this one, within ±25 mm. See them here Found 1261 panels of the same or similar size to this one, within ±50 mm. See them here Found 1942 panels of the same or similar size to this one, within ±100 mm. See them here

About the AE CMEQ-66BDS series

6 answered

These answers cover the whole series. Where a figure differs, the specification above is this module's own.

How does quarter-cut cell technology in AE CMEQ-66BDS panels differ from popular half-cut cells?
Quarter-cut cells are cut into four pieces, twice as many as half-cut. Shorter current paths mean lower resistive losses and reduced module heating, resulting in higher energy yield from the same surface area. Additionally, smaller cell fragments handle partial shading better, for example from chimneys or trees.
What warranty comes with AE CMEQ-66BDS panels?
AE Solar provides a 15-year product warranty and a 30-year power output warranty. This means the manufacturer guarantees a defined performance level for three decades, one of the longer terms on the market, setting this series apart from older PERC-based modules.
Do AE CMEQ-66BDS bifacial panels require special installation?
To fully exploit the bifacial potential, panels should be mounted on racking that elevates them above the ground, paired with a light, reflective surface (such as white gravel or reflective sheeting), especially in ground-mounted installations. On dark roof surfaces, the rear-side gain will be lower, but the panel still performs as a standard monofacial module.
What is the maximum power output of the AE CMEQ-66BDS panel and what installations is it suited for?
CMEQ-66BDS series panels reach up to 670 Wp, placing them among high-power modules. Due to their large format and high wattage, the series is particularly attractive for utility-scale solar farms and large commercial or industrial installations, where minimizing module count and optimizing LCOE are priorities.
Do n-type TOPCon cells in AE CMEQ-66BDS panels perform better than classic PERC cells in Poland's climate?
Yes, TOPCon cells have a lower temperature coefficient and perform better under weak, diffuse light conditions than PERC. In Poland's climate, with frequent cloudy days and temperature swings, this translates into more stable energy production throughout the year, especially in spring and autumn.
Is AE Solar, the manufacturer of CMEQ-66BDS panels, a trustworthy company?
AE Solar is a Tier 1 manufacturer headquartered in Germany, indicating strong financial standing and bankability for projects using its modules. Tier 1 status matters for financing large installations, as banks and investors more readily accept equipment from manufacturers with a proven track record and supply stability.
Add to compare