Skip to main content

APsystems vs KIOTO Solar - solar panel manufacturer comparison

APsystems
China Founded 2010
Read the APsystems review
VS
KIOTO Solar
Austria Founded 1991
Read the KIOTO Solar review
At a glance

KIOTO Solar has the broader catalog (7 vs 0 models). KIOTO Solar leans bifacial (57% of lineup).

Both catalogues are read from the manufacturers' own datasheets. A brand is not scored against the market here, only against the other brand on this page.

Panel models
0 7
Highest power
0 Wp 450 Wp
Best efficiency
- 22.8%
Average efficiency
- 22.5%
Bifacial share
0% 57%
Average warranty
- 27 yrs
01

The two companies

Company facts, not datasheet figures
APsystems

APsystems (Altenergy Power System, operating as Yuneng Technology) is a global manufacturer specializing in multi-module microinverters, energy storage systems, and rapid shutdown devices for residential and commercial solar installations. Founded in Silicon Valley in 2010 and now headquartered in China with a major...

Founded
2010
Headquarters
Jiaxing, China
Employees
500-1000
KIOTO Solar

KIOTO Solar (KIOTO Photovoltaics GmbH) is an Austrian manufacturer of photovoltaic modules, producing panels exclusively at its facility in St. Veit an der Glan, Carinthia. The company traces its roots to 1991 as part of the Sonnenkraft group, with PV module production beginning in 2005. It is the market leader for PV...

Founded
1991
Headquarters
St. Veit an der Glan, Austria
Annual capacity
<1 GW/year
Employees
201-500
02

Catalogue against catalogue

Averages over every model in the database
Metric APsystems KIOTO Solar
Catalog & Power
Panel Models 0 7+7
Max Power 0 W 450 W+450 W
Avg Power 0 W 446 W+446 W
Efficiency
Max Efficiency - 22.83%
Avg Efficiency - 22.53%
Reliability & Warranty
Avg Temp Coefficient - -0.309%/°C
Bifacial Share 0 (0%) 4 (57%)+57 pp
Avg Warranty - 27.1 yrs

An average over a catalogue describes the range a manufacturer publishes, not the module you would buy. A brand with two flagship panels and eighty older ones averages worse than one that has retired its back catalogue.

03

What each of them builds

Cell technology across the market
Efficiency spread
Share of each catalogue in every efficiency band
Power spread
Share of each catalogue in every power band
APsystems cell technology
Share of their models by cell architecture
KIOTO Solar cell technology
Share of their models by cell architecture

Dominant cell tech: TOPCon (100%)

04

The flagships

Highest-power models from each brand
APsystems all models
No panels from this manufacturer are in the database yet.
05

Written summary

Checking cache...

APsystems is a US-headquartered company (with major Chinese manufacturing and R&D roots via parent Altenergy Power System) best known not for solar panels themselves but for module-level power electronics, chiefly microinverters such as the DS3, QT2 and the newer EZ1 plug-in unit for DIY and balcony solar. It does not appear on panel-focused Tier 1 or BloombergNEF lists because it is not a module manufacturer; instead, a 2025 Sinovoltaics bankability report ranked APsystems first among inverter companies using an Altman Z-score financial-health model, and the company cites cumulative microinverter shipments above 7.5 GW across more than 160 countries. KIOTO Solar, by contrast, is an Austrian panel brand with a long-standing identity in the DACH solar market; since 2020 its modules have been produced in cooperation with Sonnenkraft. Independent confirmation of KIOTO's Tier 1 or BNEF status was not found in available sources, so its institutional footprint should be treated as regional and distributor-documented rather than globally benchmarked, whereas APsystems has a more clearly documented, internationally recognized bankability position in its own segment.

Because the two brands serve different layers of a solar installation, they are typically complementary rather than competing. APsystems products are chosen for residential and small commercial rooftops where module-level MPPT, rapid shutdown compliance, and long inverter warranties (now 25 years on DS3 and QT2 in the US and Canada) matter, including shade-prone or panel-mismatched roofs. KIOTO Solar panels, including bifacial half-cut TOPCon models seen in current distributor datasheets, are positioned as mainstream European residential and commercial rooftop modules, with TOPCon reliability itself an industry-wide watch area due to reported moisture-ingress findings in some polymeric-backsheet TOPCon designs.

Given the differing product categories, there is no single "better" choice: a buyer needs KIOTO-type panels paired with an inverter solution, and APsystems microinverters are a credible option for that pairing, particularly where shading or long-term inverter warranty is a priority, while KIOTO's claims should be checked against independent module test data before purchase.

Generated by Claude Sonnet 5 · 2026-11-10

06

Other brand comparisons

Build your own
Manufacturers
APsystems A.B. Energy
Manufacturers
AE Solar KIOTO Solar
Manufacturers
APsystems AEET
Manufacturers
AIKO KIOTO Solar
Manufacturers
APsystems AKCOME
Manufacturers
ARTsolar KIOTO Solar
Something missing from a catalogue? Both lists are built from the datasheets in the database. If a model is absent, it has not been ingested yet.

Shop prices: See 2 KIOTO Solar offers

Comparisons are computed from manufacturer datasheets held in the ComparePV database and may not reflect a brand's complete current lineup. Nothing on this page is paid placement.