Middle of its segment, weak in heat
The WST-M6 series is a monocrystalline PERC module built on a classic 60-cell layout, also available in a Full Black version for those who want a uniform, visually clean roof. Rather than chasing power records, WINAICO focused here on reinforced frame and laminate construction, which makes a real difference in regions exposed to strong wind, heavy snow load, or hail - this is a panel for installers who need resilience in harsh weather, not just a good spec sheet. Every unit undergoes 100% electroluminescence inspection, eliminating micro-cracks, soldering defects, and other hidden flaws before shipment. The modules also go through voluntary testing that exceeds IEC standards, including PID and LeTID resistance as well as salt mist and ammonia exposure, making them a solid choice for coastal installations or agricultural settings. Backing it all is a 25-year linear performance guarantee, giving investors predictable, long-term returns. The WST-M6 works well both on residential rooftops and in smaller commercial installations where durability and decades of stable operation matter most.
Ranking
Signals from the data
Residential and commercial.
Hot climates.
Bottom 25% of the PERC 300-350 W segment, against a median of -0.360.
WINAICO built the WST-M6 series with a reinforced frame and laminate structure, materially improving resistance to wind, snow, and hail loads. This is an engineering choice aimed at harsh weather conditions rather than chasing power-rating records.
Every module undergoes full electroluminescence (EL) inspection before shipment, eliminating micro-cracks and soldering defects at the production stage - a higher QA bar than the sampling-based testing used by many tier-2 competitors.
Modules are tested for PID resistance (up to 300h at 1,000V/85°C/85% RH) and LeTID, plus salt mist (IEC 61701) and ammonia exposure - exceeding standard IEC requirements. This is a real advantage for coastal and agricultural installations.
The manufacturer offers a 25-year product warranty and a linear performance warranty, ensuring predictable degradation over the full service life - a solid offering from a Tier-1, bankable manufacturer founded in Taiwan in 2003.
Efficiency up to 20.14% is close to SunLink LUXMAX (20.16%) and higher than Selfa SV120M.5(3) (19.8%) at the same 335 Wp max power - the series is not technologically behind comparable 60-cell modules.
The WST-M6 series (launched in 2016) is no longer in production, which limits availability of warranty service, replacement units, and the ability to extend an existing installation with an identical model in the future.
WST-M6 is a classic 2016-era PERC construction with no bifacial capability - newer TOPCon or HJT series (e.g., Huasun HSN-210R-B72) can capture additional rear-side yield that this series cannot provide.
- Efficiency of 19.5% matches the PERC 0-400W median
- Power density of 195.4 W/m² matches the PERC 0-400W median
- At -0.38%/°C, loses 0.02pp more power per degree than PERC 0-400W median (-0.36%/°C)
- Weight of 18.6 kg (1.9 kg below PERC 0-400W median of 20.5 kg) allows easier transport and roof mounting
- #12938 for efficiency, #13688 for temperature performance out of 14354 panels
Specifications
Datasheet charts
Measured curves published by WINAICO in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 325 Wp appear here. The rest cover the whole series.
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Found 121 panels of the same or similar size to this one, within ±10 mm. See them here Found 400 panels of the same or similar size to this one, within ±25 mm. See them here Found 462 panels of the same or similar size to this one, within ±50 mm. See them here Found 771 panels of the same or similar size to this one, within ±100 mm. See them here
About the WST-M6 series
These answers cover the whole series. Where a figure differs, the specification above is this module's own.