Middle of its segment, weak in heat
The Solarever HC 96 series is a line of photovoltaic modules built on 96 half-cut monocrystalline cells, which reduces current losses and improves panel performance under partial shading conditions. The half-cut technology combined with PERC cells results in more stable energy production even under lower irradiance, which matters both for residential installations and larger commercial systems. The panels use a bifacial design, allowing the rear side of the module to also generate energy from light reflected off the ground or roof surface, increasing total yield without expanding the installation footprint. In addition, versions with dual glass construction and a full black frame combine aesthetics with enhanced mechanical durability, moisture resistance, and resistance to UV degradation. The design was engineered to withstand harsh climate conditions - heavy snow loads and strong winds - making it a versatile choice for installers looking for a solution that performs well on both sloped roofs and ground-mount farms. The HC 96 series stands out from the competition by combining high power density, mounting flexibility, and long-term reliability, translating into a lower levelized cost of energy (LCOE) and reduced demands on the rest of the balance of system (BoS).
Ranking
Signals from the data
Residential, commercial, shaded-installations and cold-climate.
Hot climates.
Bottom 20% of the TOPCon 450-500 W segment, against a median of -0.290.
Peak efficiency of 23.52% ties Recom Lynx and exceeds Trina Vertex S+ (23.5%) and Astronergy ASTRO N7s 2.0 (23.5%), placing the HC 96 series at the very top of the compared TOPCon models.
96 half-cut monocrystalline cells reduce resistive losses and improve performance under partial shading, while N-type TOPCon technology delivers lower LID/LETID degradation than older PERC cells.
A 15-year product warranty combined with a 30-year linear power warranty (87.4% of nominal power retained) matches or exceeds most tier-1 manufacturers, many of which still cap warranties at 25 years.
Bifacial construction paired with dual tempered glass enables additional rear-side energy yield while improving mechanical durability and moisture resistance compared to backsheet-based modules.
Up to 470 Wp within roughly 2.0 m² (1762×1134 mm) gives a competitive power density, reducing mounting structure and BoS requirements per kWp installed.
Unlike peer manufacturer Trina Solar (Tier 1), Solarever does not appear on the BNEF Tier 1 solar module methodology list for 2026, which can be a significant factor for bank-financed commercial and utility-scale PV projects.
- At 22.5% efficiency, this panel is on par with typical TOPCon 450-500W modules
- At 225.2 W/m² power density, roof space requirements are typical for TOPCon 450-500W panels
- Temperature coefficient of -0.30%/°C matches the TOPCon 450-500W median
- At 23.0 kg, weight matches the TOPCon 450-500W median
- #4108 for efficiency, #6093 for temperature performance out of 14005 panels
Specifications
Datasheet charts
Measured curves published by Solarever in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 450 Wp appear here. The rest cover the whole series.
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.
Found 1395 panels of the same or similar size to this one, within ±10 mm. See them here Found 1425 panels of the same or similar size to this one, within ±25 mm. See them here Found 3614 panels of the same or similar size to this one, within ±50 mm. See them here Found 3962 panels of the same or similar size to this one, within ±100 mm. See them here