Skip to main content
Seraphim SRP-395-BMD-HV
Seraphim Brand review

SRP-395-BMD-HV

395 Wp PERC
ComparePV verdict

Strong in heat, no clear weak spot

Rank 12,049 of 14,005
Compare panels Datasheet PDF
Power (Wp)
395
Strong · top 12%
Efficiency (%)
20.23
Strong · top 23%
Density (Wp/m²)
202.3
Typical · median 199.0
Temp (%/°C)
-0.340
Strong · top 15%
Weight (kg)
21.5
Typical · median 21.4 kg
Warranty (yrs)
25
Typical · median 25 yrs

The Seraphim Seco solar panel series introduces a new level of quality in the field of energy efficiency, basing its construction on advanced N-type cell technology. This solution effectively eliminates the problem of rapid power degradation in the first years of use, which directly translates into a higher return on investment for homeowners and businesses. A key differentiator of the Seco series is the optimized bifacial design, which allows for the absorption of reflected light from both sides of the module, significantly increasing the total energy yield by more than ten percent compared to standard single-sided solutions. These models are characterized by exceptional resistance to extreme mechanical loads, while maintaining reduced module weight, making them an ideal choice for roofs with limited load-bearing capacity. Thanks to the use of Half-Cut cell technology, these panels perform excellently in partial shading conditions, minimizing power losses. Choosing the Seco series is a guarantee of stable system operation for decades, offering a low temperature coefficient that protects installation performance during hot days. This product is dedicated to investors seeking uncompromising quality, combining modern design with the highest resistance to LID and LeTID degradation phenomena, which puts Seraphim Seco a step ahead of traditional market competition.

Ranking

579 panels in the segment PERC 350-400 W
Metric This panel Median Position in segment Overall rank
Module efficiency 20.23% 19.90% Strong · top 23% 11,899
Power density 202.3 199.0 Typical 11,887
Temperature coefficient -0.340 -0.350 Strong · top 15% 8,778
Weight per kWp 54.4 55.8 Typical 8,731
Performance warranty 25 yrs 25 yrs Typical 9,798
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

2 positive · 0 caution
Best for

Commercial, utility-scale, shaded-installations and hot-climate.

Strengths
-0.340 %/°C temperature coefficient

Top 15% of the PERC 350-400 W segment, against a median of -0.350.

20.23% module efficiency

Top 23% of the PERC 350-400 W segment, against a median of 19.90%.

Notes from the database
  • 20.2% module efficiency - 0.8pp better than the PERC 0-400W median of 19.4%
  • 202.3 W/m² power density - 7.9 W/m² more than PERC 0-400W median (194.4 W/m²), more power per roof area
  • At -0.34%/°C, hot weather performance is typical for PERC 0-400W panels
  • Weight of 21.5 kg is typical for PERC 0-400W panels
  • Ranked #11899 out of 14005 panels for efficiency in the database

Specifications

Open datasheet PDF
Nominal power (Pmax) 395 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 20.23 % Strong Segment median 19.90%
Vmpp · Impp 30.69 V · 12.88 A Operating point at max power
Voc · Isc 37.01 V · 13.50 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 1722×1134×30 mm · 1.95 m² of roof
Weight 21.5 kg Typical Typical · median 21.4 kg
Cells 108 · PERC Monocrystalline
Coefficient Pmax -0.340 %/°C Strong top 15% of its segment
Coefficient Voc · Isc -0.260 · 0.050 %/°C
NOCT 45 °C At 800 W/m², 20 °C ambient
Product warranty 15 years Hardware defects only
Performance warranty 25 years Typical median 25 yrs · median 25 yrs
End-of-warranty output 84.8 % Equals 324 W guaranteed
Degradation 2.00 → 0.55 % First year, then annual

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.340 %/°C against a segment median of -0.350
-
Filter these
Size
Panel Power Eff. Temp. Weight Difference
Seraphim SRP-395-BMD-HV 395 W 20.23% -0.340 21.5 kg You are here
LX-440M/182-108+GG 440 W 23.07% -0.240 23.6 kg Cooler, +2.8 pp, +5 yr warranty
GKA210M360W 360 W 23.00% - 16.2 kg Lighter, +2.8 pp, +5 yr warranty
GKA210M380W (1/4*4*38) 380 W 23.00% - 17.1 kg Lighter, +2.8 pp, +5 yr warranty
GKA210M400W (1/2*4*20) 400 W 23.00% - 18.0 kg Lighter, +2.8 pp, +5 yr warranty
GKA210M400W (1/4*4*40) 400 W 23.00% - 18.0 kg Lighter, +2.8 pp, +5 yr warranty
GKA210M380W (1/2*4*19) 380 W 23.00% - 17.1 kg Lighter, +2.8 pp, +5 yr warranty
JT440SYK(B) 440 W 22.90% -0.240 23.0 kg Cooler, +2.7 pp, +5 yr warranty
LX-440M/182-108+ 440 W 22.86% -0.300 21.5 kg +45 W, cooler, +2.6 pp
SRP-400-BMD-BG 400 W 20.48% -0.340 24.0 kg Heavier, +0.2 pp, +5 yr warranty
SRP-405-BMD-BG 405 W 20.74% -0.340 24.0 kg Heavier, +0.5 pp, +5 yr warranty
LR7-54HJD-510M 510 W 25.00% -0.240 23.5 kg +115 W, cooler, +4.8 pp
AIKO-A495-MCE54Mw 495 W 24.80% -0.260 21.0 kg +100 W, cooler, +4.6 pp
LR7-54HJD-505M 505 W 24.70% -0.240 23.5 kg +110 W, cooler, +4.5 pp
AIKO-A490-MCE54Mw 490 W 24.50% -0.260 21.0 kg +95 W, cooler, +4.3 pp
LR7-54HJD-500M 500 W 24.50% -0.240 23.5 kg +105 W, cooler, +4.3 pp
CIPRO-TN9C54M-500W 500 W 24.50% -0.260 21.4 kg +105 W, cooler, +4.3 pp

Found 1783 panels of the same or similar size to this one, within ±10 mm. See them here Found 1914 panels of the same or similar size to this one, within ±25 mm. See them here Found 3392 panels of the same or similar size to this one, within ±50 mm. See them here Found 3970 panels of the same or similar size to this one, within ±100 mm. See them here

Common questions

6 answered
What are the product and power output warranties for the Seraphim Seco series?
Seraphim Seco panels come with a 15-year product warranty covering materials and workmanship, plus a 25-year linear power output warranty. First-year degradation is capped at 2%, followed by approximately 0.55% per year thereafter, ensuring over 80% of rated power after 25 years. These terms are in line with other Tier 1 manufacturers and make the Seco series a solid long-term investment.
What is PERC cell technology used in Seraphim Seco panels, and is it a modern solution?
PERC (Passivated Emitter and Rear Cell) is an advanced monocrystalline silicon cell design that adds a rear passivation layer to reflect photons that would otherwise be lost, pushing module efficiency above 21%. The Seco 555W pairs PERC with multi-busbar wiring and 144 half-cut cells, delivering higher real-world energy yield compared to older full-cell PERC designs.
How do Seraphim Seco 555W panels perform under partial shading from a chimney or antenna?
The 144 half-cut cell layout splits each cell into two independent halves, so shade falling on one half of the module does not suppress output from the other. This significantly reduces mismatch losses compared to full-cell panels. Seraphim Seco is therefore a practical choice for rooftops with chimneys, dormers, or neighboring obstructions that cause intermittent shading.
How much does a Seraphim Seco 555W panel weigh, and is it suitable for a roof with limited load capacity?
The SRP-555 model weighs approximately 32 kg with dimensions of 2278 × 1134 × 30 mm. Before installation on an older or structurally limited roof, a structural assessment is strongly recommended, as the combined load of multiple panels plus racking hardware can be substantial. For roofs with very low load ratings, lighter modules in a lower wattage class may be a safer choice.
Is Seraphim a trustworthy manufacturer, and what does Tier 1 status actually mean in practice?
Seraphim Solar System is a Chinese manufacturer headquartered in Changzhou and classified as Tier 1 by Bloomberg NEF. In practice, Tier 1 means fully automated in-house production lines, a proven track record of project financing from major banks, and consistent product quality. Their 15-year product warranty and established after-sales support make Seraphim Seco a reliable option for residential and commercial installations with a 25-year investment horizon.
Do Seraphim Seco panels lose significant power on hot summer days?
Like all silicon-based PV modules, Seco panels lose some output as cell temperature rises above 25°C STC. The combination of PERC technology, multi-busbar design, and half-cut cells results in a competitive temperature coefficient of approximately -0.34% per degree Celsius. In a central European climate, the thermal impact on annual energy yield is moderate, and the panels maintain stable long-term performance across seasonal temperature swings.
Add to compare