Strong in heat, needs the roof space
The Runergy SS9-60HD 585-610M (Lumina I) series are modules designed to maximize energy yield from the same roof or ground area. The use of a half-cut architecture and a refined design minimizes losses under load and improves production stability even in less-than-ideal conditions. This translates to more predictable results in the Polish climate, even with occasional cloud cover and lower temperatures.
In terms of competition, these modules stand out due to their high efficiency in the high-power segment and low degradation over time, which supports the long-term profitability of the investment. For installers and designers, compatibility with modern 1500 V systems and a sealed, dust-proof enclosure (IP68) is also important, especially in installations exposed to moisture and dust.
This is a good choice for PV farms, commercial rooftops, and larger prosumer installations, where quick power "packing" and certainty of parameters due to positive power tolerance are important.
Ranking
Signals from the data
Commercial, utility-scale, shaded-installations and residential.
Roofs where every square metre has to count, tight roof space and weight-limited structures.
Top 7% of the PERC 550-600 W segment, against a median of -0.350. Ranked 8,787th in the whole database.
Top 25% of the PERC 550-600 W segment, against a median of 27 yrs.
Bottom 15% of the PERC 550-600 W segment, against a median of 212.9.
Bottom 17% of the PERC 550-600 W segment, against a median of 21.29%.
Bottom 22% of the PERC 550-600 W segment, against a median of 52.7.
Runergy is listed on BloombergNEF's Tier 1 PV Module Manufacturers ranking (confirmed Q4 2023 and again in 2024), meaning modules from the brand have financed projects through at least 6 different commercial banks. This materially eases bank financing for larger installations.
Half-cut cells reduce resistive losses and improve partial-shading tolerance, while the bifacial dual-glass design captures additional yield from reflected irradiance off the ground - valuable on light-colored surfaces or east-west mounting structures.
The manufacturer guarantees power output for 30 years (typically down to ~84.95% of nominal power at end of term), matching the current premium standard in the segment and supporting predictable revenue in PV financial models.
Peak efficiency of 21.55% at 610 Wp matches VSUN's 120BMH-DG (610 Wp, 21.55%) and exceeds many older PERC modules, allowing competitive power density on constrained roof or ground footprints.
The sealed IP68 junction box and compatibility with 1500 V DC systems lower failure risk in humid or dusty environments and allow longer strings, reducing BoS costs (cabling, optimizers, switchgear).
The series relies on PERC cells, while comparable 610 Wp TOPCon modules (e.g., Renewsys DESERV Extreme, 23.64%) reach efficiency up to ~2.1 pp higher. In practice this means lower energy yield per unit area than newer-generation competitors, and typically higher LID degradation compared to N-type alternatives.
The product warranty is 12 years, while several newer Tier-1 series (especially TOPCon-based) now standardly offer 15-year product warranties alongside the same 30-year power warranty - a potential differentiator for investors comparing total lifecycle service cost at comparable pricing.
- At 20.9% efficiency, this panel is on par with typical PERC 550-600W modules
- Power density of 208.5 W/m² is 4.4 W/m² below PERC 550-600W median (212.9 W/m²) - needs more roof space
- Temperature coefficient of -0.33%/°C matches the PERC 550-600W median
- At 34.5 kg (3.7 kg above PERC 550-600W median of 30.8 kg), requires checking roof load capacity
- 70% bifaciality enables rear-side power generation, boosting yield by 4-10% on reflective surfaces
Specifications
Datasheet charts
Measured curves published by Runergy in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 590 Wp appear here. The rest cover the whole series.
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.
Found 497 panels of the same or similar size to this one, within ±10 mm. See them here Found 502 panels of the same or similar size to this one, within ±25 mm. See them here Found 502 panels of the same or similar size to this one, within ±50 mm. See them here Found 502 panels of the same or similar size to this one, within ±100 mm. See them here
About the SS9-60HD 585-610M (Lumina I) series
These answers cover the whole series. Where a figure differs, the specification above is this module's own.