Skip to main content
Runergy HY-DH144N8-595

Runergy HY-DH144N8-595

595 Wp N-type Bifacial 80%
ComparePV verdict

Space saver, no clear weak spot

Rank 3,520 of 14,354
Compare panels Datasheet PDF
Power (Wp)
595
Strong · top 5%
Efficiency (%)
23.00
Strong · top 10%
Density (Wp/m²)
230.3
Strong · top 6%
Temp (%/°C)
-0.290
Typical · median -0.290
Weight (kg)
32.7
Typical · median 30.5 kg
Warranty (yrs)
30
Typical · median 30 yrs

The Runergy HY-DH144N8 Plus series consists of photovoltaic modules built on N-Type cells manufactured in TOPCon technology, combining high efficiency with strong resistance to degradation over time. The half-cut cell architecture paired with a multi-busbar (SMBB) layout reduces resistive losses and improves low-light performance, translating into a real gain in energy yield during overcast conditions or in early morning and late afternoon light. Thanks to its bifacial dual-glass design, the module also captures irradiance reflected from the ground on its rear side - a feature that pays off particularly well on ground-mounted arrays or rooftops with light-colored surfaces, gravel, or snow, where ambient albedo is high. The panels stand out for their low annual degradation, characteristic of N-Type cells, allowing them to maintain stable power output throughout the entire service life, a factor investors value when planning long-term return on investment. Compatibility with 1500V DC systems enables longer strings and reduces cabling and balance-of-system (BoS) costs, lowering the overall cost of the installation. The HY-DH144N8 Plus series is well suited for both commercial installations and large-scale solar farms, where the ratio of output to surface area and predictable long-term ROI matter most.

Ranking

263 panels in the segment N-type 550-600 W
Metric This panel Median Position in segment Overall rank
Module efficiency 23.00% 22.45% Strong · top 10% 2,049
Power density 230.3 224.5 Strong · top 6% 1,891
Temperature coefficient -0.290 -0.290 Typical 2,288
Weight per kWp 55.0 52.7 Typical 9,557
Performance warranty 30 yrs 30 yrs Typical 31
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

7 positive · 2 caution
Best for

Commercial, utility-scale and shaded-installations.

Strengths
230.3 watts per square metre

Top 6% of the N-type 550-600 W segment, against a median of 224.5. Ranked 1,891st in the whole database.

23.00% module efficiency

Top 10% of the N-type 550-600 W segment, against a median of 22.45%. Ranked 2,049th in the whole database.

What owners get
N-type TOPCon technology with low degradation

The HY-DH144N8 Plus series N-type TOPCon cells show under 1% first-year degradation and below 0.4% annually thereafter, outperforming typical PERC modules (0.5-0.6%/year) and translating into higher cumulative energy yield over a 30-year service life.

Dual-glass bifacial construction

By capturing ground-reflected irradiance on the rear side, the module delivers additional energy yield on ground-mount installations and high-albedo roofs (light gravel, snow), boosting output by up to several percent compared to an equivalent monofacial module.

30-year linear power warranty

The manufacturer guarantees a high retained power level over a 30-year horizon (roughly 89.4% at 25 years per manufacturer data), placing the series in the premium N-type tier comparable to the Tongwei TWMND series and other tier-1 segment leaders.

Competitive module efficiency up to 23.2%

Efficiency in the 22.5-23.2% range matches the benchmark peer Tongwei TWMND (23.2%) and is clearly above Talesun BISTAR (21.5%), allowing higher installed capacity on the same roof or land area.

1500V DC system compatibility

Support for longer strings reduces the number of required inverters, DC cabling, and BoS components, meaningfully lowering CAPEX for commercial installations and PV farms, particularly at 580-600 Wp per module.

Trade-offs
Product warranty below market trend

The 12-year product warranty is shorter than the increasingly common 15-year standard in the premium N-type segment, already offered by some tier-1 competitors with comparable power and efficiency specifications.

Shorter manufacturer track record relative to warranty length

Runergy has been in operation since 2013 (13 years), shorter than the stated 30-year power warranty - compared to manufacturers with a longer market history (e.g., Trina, JinkoSolar), this adds a degree of risk when assessing the ability to honor the warranty over its full term.

Notes from the database
  • At 23.0% efficiency, this panel is 0.6pp above typical N-type 550-600W modules (median: 22.4%)
  • 230.3 W/m² power density - 5.8 W/m² more than N-type 550-600W median (224.5 W/m²), more power per roof area
  • Temperature coefficient of -0.29%/°C matches the N-type 550-600W median
  • At 32.7 kg, this panel is 2.2 kg heavier than the N-type 550-600W median (30.5 kg) - more demanding for installation crews
  • Bifacial design (80% factor) captures reflected light - adds 4-12% yield on ground-mount or white roof

Specifications

Open datasheet PDF
Nominal power (Pmax) 595 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 23.00 % Strong Segment median 22.45%
Vmpp · Impp 44.64 V · 13.33 A Operating point at max power
Voc · Isc 52.58 V · 13.93 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 2278×1134×35 mm · 2.58 m² of roof
Weight 32.7 kg Typical Typical · median 30.5 kg
Cells 144 · N-type Monocrystalline
Bifaciality 80 % Rear output as a share of front
Coefficient Pmax -0.290 %/°C Typical median -0.290 of its segment
Coefficient Voc · Isc -0.250 · 0.045 %/°C
NOCT 45 °C At 800 W/m², 20 °C ambient
Product warranty 12 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 87.4 % Equals 520 W guaranteed
Degradation 1.00 → 0.40 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by Runergy in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 595 Wp appear here. The rest cover the whole series.

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.290 %/°C against a segment median of -0.290
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Filter these
Size
Panel Power Eff. Temp. Weight Difference
Runergy HY-DH144N8-595 595 W 23.00% -0.290 32.7 kg You are here
AIKO-A645-MAE72Mw 645 W 25.00% -0.260 27.0 kg +50 W, lighter, +2.0 pp
LR7-60HVH-560M 560 W 24.80% -0.260 25.0 kg -35 W, lighter, +1.8 pp
AIKO-A640-MAE72Mw 640 W 24.80% -0.260 27.0 kg +45 W, lighter, +1.8 pp
SPR-BE66-GD615 615 W 24.80% -0.260 30.1 kg Cooler, +1.8 pp, +10 yr warranty
LR7-60HVH-555M 555 W 24.60% -0.260 25.0 kg -40 W, lighter, +1.6 pp
AIKO-A635-MAE72Mw 635 W 24.60% -0.260 27.0 kg +40 W, lighter, +1.6 pp
HY-DH144P8-535 535 W 20.70% -0.350 32.0 kg -60 W, hotter, -2.3 pp
HY-DH144P8-540 540 W 20.90% -0.350 32.0 kg -55 W, hotter, -2.1 pp
HY-WH144P8-545 545 W 21.10% -0.350 27.6 kg Hotter, lighter, -1.9 pp
HY-WH144P8-550 550 W 21.30% -0.350 27.6 kg Hotter, lighter, -1.7 pp
HY-WH144P8-555 555 W 21.50% -0.350 27.6 kg Hotter, lighter, -1.5 pp
HY-WH144P8-560 560 W 21.70% -0.350 27.6 kg Hotter, lighter, -1.3 pp
AIKO-A650-MAE72Mw 650 W 25.20% -0.260 27.0 kg +55 W, lighter, +2.2 pp
SPR-BE66-GD610 610 W 24.60% -0.260 30.1 kg Cooler, +1.6 pp, +10 yr warranty
AIKO-A630-MAH72Dw 630 W 24.40% -0.260 32.5 kg +35 W, cooler, +1.4 pp

Found 2343 panels of the same or similar size to this one, within ±10 mm. See them here Found 2385 panels of the same or similar size to this one, within ±25 mm. See them here Found 2404 panels of the same or similar size to this one, within ±50 mm. See them here Found 2574 panels of the same or similar size to this one, within ±100 mm. See them here

About the HY-DH144N8 Plus series

6 answered

These answers cover the whole series. Where a figure differs, the specification above is this module's own.

What is the maximum power output of Runergy HY-DH144N8 Plus panels?
The HY-DH144N8 Plus series reaches up to 600 Wp, made possible by N-type TOPCon cells in a half-cut architecture combined with SMBB multi-busbar technology. This high per-unit power output means fewer modules are needed to reach a given system size, reducing mounting structure and labor costs.
How does bifacial technology in Runergy HY-DH144N8 Plus differ from standard one-sided panels?
Bifacial panels with a double-glass design capture light not only on the front but also on the rear side, using radiation reflected from the ground. This delivers extra energy yield, especially in ground-mounted installations, light-colored roofs, or surfaces covered with gravel or snow, where albedo is high. Standard monofacial panels cannot capture this additional gain.
What warranty comes with Runergy HY-DH144N8 Plus panels?
The HY-DH144N8 Plus series carries a 12-year product warranty and a 30-year linear power warranty. Thanks to the low annual degradation typical of N-type cells, the panels maintain stable output over their entire service life, helping investors forecast long-term project profitability more reliably.
Are Runergy HY-DH144N8 Plus panels compatible with 1500V DC systems?
Yes, this series is compatible with 1500V DC systems, allowing for longer strings connected to a single inverter. This reduces the number of required BoS components, such as cabling and junction boxes, lowering the overall cost of the installation.
What types of installations are Runergy HY-DH144N8 Plus panels suited for?
Given their high per-unit power, bifacial design, and 1500V DC compatibility, the HY-DH144N8 Plus series is primarily intended for commercial installations and large PV farms, where the ratio of output to occupied area and predictable long-term return on investment are critical.
Is Runergy a Tier 1 manufacturer and where are the panels made?
Yes, Runergy is listed as a Tier 1 manufacturer, reflecting its financial stability and production scale as recognized by project financing institutions. The HY-DH144N8 Plus panels are manufactured in China, where the company operates facilities producing both cells and finished PV modules.
Add to compare