Skip to main content
Runergy HY-DH144N8-585

Runergy HY-DH144N8-585

585 Wp N-type Bifacial 80%
ComparePV verdict

Middle of its segment, heavy for its output

Rank 4,339 of 14,354
Compare panels Datasheet PDF
Power (Wp)
585
Typical for its class
Efficiency (%)
22.60
Typical · median 22.45%
Density (Wp/m²)
226.5
Typical · median 224.5
Temp (%/°C)
-0.290
Typical · median -0.290
Weight (kg)
32.7
Weak · 2.2 kg above median
Warranty (yrs)
30
Typical · median 30 yrs

The Runergy HY-DH144N8 Plus series consists of photovoltaic modules built on N-Type cells manufactured in TOPCon technology, combining high efficiency with strong resistance to degradation over time. The half-cut cell architecture paired with a multi-busbar (SMBB) layout reduces resistive losses and improves low-light performance, translating into a real gain in energy yield during overcast conditions or in early morning and late afternoon light. Thanks to its bifacial dual-glass design, the module also captures irradiance reflected from the ground on its rear side - a feature that pays off particularly well on ground-mounted arrays or rooftops with light-colored surfaces, gravel, or snow, where ambient albedo is high. The panels stand out for their low annual degradation, characteristic of N-Type cells, allowing them to maintain stable power output throughout the entire service life, a factor investors value when planning long-term return on investment. Compatibility with 1500V DC systems enables longer strings and reduces cabling and balance-of-system (BoS) costs, lowering the overall cost of the installation. The HY-DH144N8 Plus series is well suited for both commercial installations and large-scale solar farms, where the ratio of output to surface area and predictable long-term ROI matter most.

Ranking

263 panels in the segment N-type 550-600 W
Metric This panel Median Position in segment Overall rank
Module efficiency 22.60% 22.45% Typical 3,825
Power density 226.5 224.5 Typical 3,665
Temperature coefficient -0.290 -0.290 Typical 2,288
Weight per kWp 55.9 52.7 Weak · bottom 13% 10,490
Performance warranty 30 yrs 30 yrs Typical 31
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

5 positive · 3 caution
Best for

Commercial, utility-scale and shaded-installations.

Not ideal for

Weight-limited structures.

Watch-outs
55.9 kg per kWp

Bottom 13% of the N-type 550-600 W segment, against a median of 52.7.

What owners get
N-type TOPCon technology with low degradation

The HY-DH144N8 Plus series N-type TOPCon cells show under 1% first-year degradation and below 0.4% annually thereafter, outperforming typical PERC modules (0.5-0.6%/year) and translating into higher cumulative energy yield over a 30-year service life.

Dual-glass bifacial construction

By capturing ground-reflected irradiance on the rear side, the module delivers additional energy yield on ground-mount installations and high-albedo roofs (light gravel, snow), boosting output by up to several percent compared to an equivalent monofacial module.

30-year linear power warranty

The manufacturer guarantees a high retained power level over a 30-year horizon (roughly 89.4% at 25 years per manufacturer data), placing the series in the premium N-type tier comparable to the Tongwei TWMND series and other tier-1 segment leaders.

Competitive module efficiency up to 23.2%

Efficiency in the 22.5-23.2% range matches the benchmark peer Tongwei TWMND (23.2%) and is clearly above Talesun BISTAR (21.5%), allowing higher installed capacity on the same roof or land area.

1500V DC system compatibility

Support for longer strings reduces the number of required inverters, DC cabling, and BoS components, meaningfully lowering CAPEX for commercial installations and PV farms, particularly at 580-600 Wp per module.

Trade-offs
Product warranty below market trend

The 12-year product warranty is shorter than the increasingly common 15-year standard in the premium N-type segment, already offered by some tier-1 competitors with comparable power and efficiency specifications.

Shorter manufacturer track record relative to warranty length

Runergy has been in operation since 2013 (13 years), shorter than the stated 30-year power warranty - compared to manufacturers with a longer market history (e.g., Trina, JinkoSolar), this adds a degree of risk when assessing the ability to honor the warranty over its full term.

Notes from the database
  • At 22.6% efficiency, this panel is on par with typical N-type 550-600W modules
  • At 226.5 W/m² power density, roof space requirements are typical for N-type 550-600W panels
  • Temperature coefficient of -0.29%/°C matches the N-type 550-600W median
  • At 32.7 kg, this panel is 2.2 kg heavier than the N-type 550-600W median (30.5 kg) - more demanding for installation crews
  • Bifaciality factor of 80% can add 4-12% extra yield with reflective mounting surface

Specifications

Open datasheet PDF
Nominal power (Pmax) 585 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 22.60 % Typical Segment median 22.45%
Vmpp · Impp 44.22 V · 13.23 A Operating point at max power
Voc · Isc 52.16 V · 13.85 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 2278×1134×35 mm · 2.58 m² of roof
Weight 32.7 kg Weak Weak · 2.2 kg above median
Cells 144 · N-type Monocrystalline
Bifaciality 80 % Rear output as a share of front
Coefficient Pmax -0.290 %/°C Typical median -0.290 of its segment
Coefficient Voc · Isc -0.250 · 0.045 %/°C
NOCT 45 °C At 800 W/m², 20 °C ambient
Product warranty 12 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 87.4 % Equals 511 W guaranteed
Degradation 1.00 → 0.40 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by Runergy in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 585 Wp appear here. The rest cover the whole series.

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.290 %/°C against a segment median of -0.290
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Filter these
Size
Panel Power Eff. Temp. Weight Difference
Runergy HY-DH144N8-585 585 W 22.60% -0.290 32.7 kg You are here
LR7-60HVH-560M 560 W 24.80% -0.260 25.0 kg Cooler, lighter, +2.2 pp
SPR-BE66-GD615 615 W 24.80% -0.260 30.1 kg +30 W, +2.2 pp, +10 yr warranty
LR7-60HVH-555M 555 W 24.60% -0.260 25.0 kg -30 W, lighter, +2.0 pp
AIKO-A635-MAE72Mw 635 W 24.60% -0.260 27.0 kg +50 W, lighter, +2.0 pp
SPR-BE66-GD610 610 W 24.60% -0.260 30.1 kg Cooler, +2.0 pp, +10 yr warranty
AIKO-A630-MAH72Dw 630 W 24.40% -0.260 32.5 kg +45 W, cooler, +1.8 pp
LR7-60HVHL-550M 550 W 24.40% -0.260 16.3 kg -35 W, 16 kg lighter, +1.8 pp
HY-DH144P8-535 535 W 20.70% -0.350 32.0 kg -50 W, hotter, -1.9 pp
HY-DH144P8-540 540 W 20.90% -0.350 32.0 kg -45 W, hotter, -1.7 pp
HY-WH144P8-545 545 W 21.10% -0.350 27.6 kg Hotter, lighter, -1.5 pp
HY-WH144P8-550 550 W 21.30% -0.350 27.6 kg Hotter, lighter, -1.3 pp
HY-WH144P8-555 555 W 21.50% -0.350 27.6 kg Hotter, lighter, -1.1 pp
HY-WH144P8-560 560 W 21.70% -0.350 27.6 kg Hotter, lighter, -5 yr warranty
AIKO-A650-MAE72Mw 650 W 25.20% -0.260 27.0 kg +65 W, lighter, +2.6 pp
AIKO-A645-MAE72Mw 645 W 25.00% -0.260 27.0 kg +60 W, lighter, +2.4 pp
AIKO-A640-MAE72Mw 640 W 24.80% -0.260 27.0 kg +55 W, lighter, +2.2 pp

Found 2343 panels of the same or similar size to this one, within ±10 mm. See them here Found 2385 panels of the same or similar size to this one, within ±25 mm. See them here Found 2404 panels of the same or similar size to this one, within ±50 mm. See them here Found 2574 panels of the same or similar size to this one, within ±100 mm. See them here

About the HY-DH144N8 Plus series

6 answered

These answers cover the whole series. Where a figure differs, the specification above is this module's own.

What is the maximum power output of Runergy HY-DH144N8 Plus panels?
The HY-DH144N8 Plus series reaches up to 600 Wp, made possible by N-type TOPCon cells in a half-cut architecture combined with SMBB multi-busbar technology. This high per-unit power output means fewer modules are needed to reach a given system size, reducing mounting structure and labor costs.
How does bifacial technology in Runergy HY-DH144N8 Plus differ from standard one-sided panels?
Bifacial panels with a double-glass design capture light not only on the front but also on the rear side, using radiation reflected from the ground. This delivers extra energy yield, especially in ground-mounted installations, light-colored roofs, or surfaces covered with gravel or snow, where albedo is high. Standard monofacial panels cannot capture this additional gain.
What warranty comes with Runergy HY-DH144N8 Plus panels?
The HY-DH144N8 Plus series carries a 12-year product warranty and a 30-year linear power warranty. Thanks to the low annual degradation typical of N-type cells, the panels maintain stable output over their entire service life, helping investors forecast long-term project profitability more reliably.
Are Runergy HY-DH144N8 Plus panels compatible with 1500V DC systems?
Yes, this series is compatible with 1500V DC systems, allowing for longer strings connected to a single inverter. This reduces the number of required BoS components, such as cabling and junction boxes, lowering the overall cost of the installation.
What types of installations are Runergy HY-DH144N8 Plus panels suited for?
Given their high per-unit power, bifacial design, and 1500V DC compatibility, the HY-DH144N8 Plus series is primarily intended for commercial installations and large PV farms, where the ratio of output to occupied area and predictable long-term return on investment are critical.
Is Runergy a Tier 1 manufacturer and where are the panels made?
Yes, Runergy is listed as a Tier 1 manufacturer, reflecting its financial stability and production scale as recognized by project financing institutions. The HY-DH144N8 Plus panels are manufactured in China, where the company operates facilities producing both cells and finished PV modules.
Add to compare