Skip to main content
Premier Energies Brand review

PE-132-615-THGB-G12R

615 Wp N-type Bifacial 80%
ComparePV verdict

Solid all-round for its segment

Rank 2,997 of 14,129
Compare panels Datasheet PDF
Power (Wp)
615
Typical for its class
Efficiency (%)
22.76
Typical · median 22.77%
Density (Wp/m²)
227.7
Typical · median 227.7
Temp (%/°C)
-0.290
Typical · median -0.290
Weight (kg)
33.5
Typical · median 32.8 kg
Warranty (yrs)
30
Typical · median 30 yrs

The PE-132 THGB-G12R series consists of bifacial photovoltaic modules built around N-type half-cut cells, housed in a dual glass construction on the new G12R wafer. This combination delivers stable performance even under demanding field conditions, and bifaciality allows for additional energy harvest from light reflected off the ground surface, meaningfully lowering the levelized cost of energy over the installation's full lifecycle. The integrated SMBB technology improves light trapping and current collection, boosting both power output and panel reliability, while the proprietary induction-based cell interconnection method eliminates the microcrack risk typical of traditional soldering. These panels also stand out for their high resistance to PID degradation and reinforced mechanical design, certified for extreme wind and snow loads, making them equally suited to residential rooftops and large-scale solar farms. The G12R series is particularly recommended for investors planning utility-scale power plants, where every extra percentage point of yield matters and a low power degradation rate over the long term translates into stronger ROI and predictable revenue for decades to come.

Ranking

368 panels in the segment N-type 600-650 W
Metric This panel Median Position in segment Overall rank
Module efficiency 22.76% 22.77% Typical 3,257
Power density 227.7 227.7 Typical 3,132
Temperature coefficient -0.290 -0.290 Typical 2,220
Weight per kWp 54.5 52.8 Typical 8,895
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

4 positive · 2 caution
Best for

Utility-scale and shaded-installations.

What owners get
Peak efficiency on par with market leaders

The maximum efficiency of 23.32% matches Jinko Tiger Neo 66HL4M-BDV and Resun RS8H-M-BD TOPCon (both also rated 630 Wp), placing this series firmly at the top of the N-type bifacial segment, well ahead of Leapton LP182*199-M-72-NH (22.54%).

Extended 30-year linear power warranty

The manufacturer offers a 30-year power output warranty, exceeding the industry-standard 25 years offered by many tier-1 competitors, which meaningfully extends the predictable payback window for investors.

N-type + SMBB + bifacial technology stack

The combination of N-type half-cut cells, SMBB (multi-busbar) technology, and a dual-glass bifacial construction reduces LID/PID degradation and increases energy yield via albedo light capture, consistent with the latest-generation premium modules launched in 2025.

Diversified supply chain - India-based manufacturer

Premier Energies (founded 1995, headquartered in India) is recognized by Wood Mackenzie as a Top 3 Grade A module manufacturer in India and Top 25 globally, offering EU/US buyers an alternative to Chinese suppliers - relevant for supply-chain diversification and trade-policy requirements.

Trade-offs
No long-term field performance track record

The PE-132 THGB-G12R series launched in 2025, so independent multi-year field degradation data is not yet available, unlike longer-established series such as Jinko's Tiger Neo.

Product warranty shorter than some competitors

The 12-year product warranty meets market standard, but some tier-1 manufacturers (e.g., select Jinko Tiger Neo variants) offer up to 15 years of product warranty in certain markets, which can matter for investors weighing total service-risk cost.

Notes from the database
  • At 22.8% efficiency, this panel is on par with typical N-type 600-650W modules
  • Power density of 227.7 W/m² matches the N-type 600-650W median
  • At -0.29%/°C, hot weather performance is typical for N-type 600-650W panels
  • Bifaciality factor of 80% can add 4-12% extra yield with reflective mounting surface
  • Ranked #3257 out of 14129 panels for efficiency in the database

Specifications

Open datasheet PDF
Nominal power (Pmax) 615 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 22.76 % Typical Segment median 22.77%
Vmpp · Impp 41.57 V · 14.79 A Operating point at max power
Voc · Isc 49.20 V · 15.62 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 2382×1134×35 mm · 2.70 m² of roof
Weight 33.5 kg Typical Typical · median 32.8 kg
Cells 132 · N-type Monocrystalline
Bifaciality 80 % Rear output as a share of front
Coefficient Pmax -0.290 %/°C Typical median -0.290 of its segment
Coefficient Voc · Isc -0.250 · 0.045 %/°C
NOCT 45 °C At 800 W/m², 20 °C ambient
Product warranty 12 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 87.4 % Equals 538 W guaranteed
Degradation 1.00 → 0.40 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by Premier Energies in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 615 Wp appear here. The rest cover the whole series.

Performance Warranty Performance Warranty Whole series Current-Voltage Curves Current-Voltage Curves Whole series

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.290 %/°C against a segment median of -0.290
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Filter these
Size
Panel Power Eff. Temp. Weight Difference
Premier Energies PE-132-615-THGB-G12R 615 W 22.76% -0.290 33.5 kg You are here
AIKO-A650-MAE72Mw 650 W 25.20% -0.260 27.0 kg +35 W, lighter, +2.4 pp
AIKO-A645-MAE72Mw 645 W 25.00% -0.260 27.0 kg +30 W, lighter, +2.2 pp
AIKO-A640-MAE72Mw 640 W 24.80% -0.260 27.0 kg Cooler, lighter, +2.0 pp
LR8-66HVD-665M 665 W 24.62% -0.260 33.5 kg +50 W, cooler, +1.9 pp
JKM650-670N-66QL6-BDV (665W class) 665 W 24.62% -0.260 32.5 kg +50 W, cooler, +1.9 pp
HY665-B144DSS 665 W 24.62% -0.260 27.6 kg +50 W, lighter, +1.9 pp
SPDG665-BC132R12 665 W 24.62% -0.260 33.5 kg +50 W, cooler, +1.9 pp
PE-132-600-THGB-G12R 600 W 22.21% -0.290 33.5 kg -15 W, -0.6 pp
PE-132-605-THGB-G12R 605 W 22.40% -0.290 33.5 kg -10 W, -0.4 pp
PE-132-610-THGB-G12R 610 W 22.58% -0.290 33.5 kg Very close match
PE-132-620-THGB-G12R 620 W 22.95% -0.290 33.5 kg Very close match
PE-132-625-THGB-G12R 625 W 23.13% -0.290 33.5 kg +10 W, +0.4 pp
PE-132-630-THGB-G12R 630 W 23.32% -0.290 33.5 kg +15 W, +0.6 pp
AIKO-A680-MDE72Mw 680 W 25.20% -0.260 29.0 kg +65 W, lighter, +2.4 pp
AIKO-A675-MDE72Mw 675 W 25.00% -0.260 29.0 kg +60 W, lighter, +2.2 pp
AIKO-A700-MAE78Dw 700 W 25.00% -0.260 34.5 kg +85 W, cooler, +2.2 pp

Found 1144 panels of the same or similar size to this one, within ±10 mm. See them here Found 1150 panels of the same or similar size to this one, within ±25 mm. See them here Found 1261 panels of the same or similar size to this one, within ±50 mm. See them here Found 1942 panels of the same or similar size to this one, within ±100 mm. See them here

About the PE-132 THGB-G12R series

6 answered

These answers cover the whole series. Where a figure differs, the specification above is this module's own.

What is the maximum power output of Premier Energies PE-132 THGB-G12R panels?
The PE-132 THGB-G12R series reaches a maximum power of up to 630 Wp. This is achieved through N-type half-cut cells on a G12R wafer combined with SMBB technology that improves current collection. The high per-module power output allows a strong installed capacity with fewer panels, reducing mounting structure and cabling costs.
What does bifacial mean for the PE-132 THGB-G12R panels and does it actually boost energy yield?
Bifacial means the panel generates electricity from both the front and rear sides. The extra energy comes from light reflected off the ground, roof, or surroundings. In ground-mounted installations on bright surfaces or in solar farms, this can add several percentage points of annual yield without adding more panels, improving overall LCOE.
What warranty comes with Premier Energies PE-132 THGB-G12R panels?
The manufacturer offers a 12-year product warranty and a 30-year power performance warranty. This provides long-term protection against factory defects as well as a guarantee that the module will maintain a high power output level over three decades, supporting stable returns on the solar investment.
What is SMBB technology in the PE-132 THGB-G12R panels and what are its benefits?
SMBB (Super Multi Busbar) increases the number of thin conductive pathways carrying current across the cell surface. This improves light capture and lowers electrical resistance, boosting both power output and durability. The series also uses an inductive cell-bonding method instead of traditional soldering, eliminating microcrack risk and improving long-term module reliability.
Are PE-132 THGB-G12R panels suitable for large-scale solar farms?
Yes, the G12R series is designed for large commercial installations and solar farms. The reinforced mechanical frame is certified for extreme wind and snow loads, while high PID degradation resistance and a low long-term power degradation rate ensure predictable revenue over decades of large-scale operation.
Who manufactures the PE-132 THGB-G12R panels and where are they produced?
The PE-132 THGB-G12R panels are made by Premier Energies, a company headquartered in India and one of the larger cell and module manufacturers in the Asian market. The use of N-type cells and dual glass construction positions this product in the premium segment, competing on quality with leading Chinese brands.
Add to compare