Skip to main content
New East Solar Brand review

NESE 585-72THB-M10

585 Wp TOPCon Bifacial 80%
ComparePV verdict

Solid all-round for its segment

Rank 4,105 of 14,005
Compare panels Datasheet PDF
Power (Wp)
585
Typical for its class
Efficiency (%)
22.65
Typical · median 22.44%
Density (Wp/m²)
226.5
Typical · median 224.4
Temp (%/°C)
-0.300
Typical · median -0.290
Weight (kg)
31.5
Typical · median 31.2 kg
Warranty (yrs)
30
Typical · median 30 yrs

The New East Solar NESE 595-72THB-M10 solar panel series is an advanced solution based on N-type TOPCon cell technology, which sets new standards for efficiency in the Polish commercial sector. Thanks to the use of M10 format cells and an innovative design, these modules maximize energy yield even in low sunlight conditions. This is a key advantage when designing solar farms and large rooftop installations, where the priority is the optimal use of available space. The use of N-type silicon effectively eliminates the problem of light-induced degradation, which guarantees higher power stability over the long term compared to standard modules. An exceptionally favorable temperature coefficient ensures that the panels operate efficiently during summer heat, which directly translates into higher profits for the investor. This product stands out with excellent resistance to mechanical loads and high durability of components, making it an ideal choice for professional PV systems. The NESE 595-72THB-M10 model is dedicated to entities focused on minimizing the LCOE energy cost and a fast return on capital, offering a technological advantage over older generations of monocrystalline panels available on the market. Choosing this series is an investment in durability and maximum yields in all weather conditions.

Ranking

1,018 panels in the segment TOPCon 550-600 W
Metric This panel Median Position in segment Overall rank
Module efficiency 22.65% 22.44% Typical 3,522
Power density 226.5 224.4 Typical 3,500
Temperature coefficient -0.300 -0.290 Typical 6,093
Weight per kWp 53.8 53.8 Typical 7,897
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

5 positive · 2 caution
Best for

Commercial, utility-scale, shaded-installations and hot-climate.

What owners get
Efficiency matches segment leaders

Peak efficiency of 23.03% matches the top peer comparables (Solarspace Lumina II at 23.03%, Heliene 144HC at 23.02%) and clearly exceeds the Sunova TS-BW78 (21.3%). This is a real advantage where roof or ground space is limited.

N-type TOPCon with low LID degradation

N-type TOPCon cells (144 half-cut) eliminate the light-induced degradation typical of PERC modules, resulting in more stable energy yield in the early years of operation compared to older monocrystalline modules.

30-year power warranty at 87.4%

The manufacturer guarantees 95.4% power output after 10 years and 87.4% after 30 years — parameters typical of top-tier N-type modules and better than standard 25-year warranties on legacy PERC modules (usually around 84.8% after 25 years).

BNEF Tier-1 status supports bankability

New East Solar is listed as BloombergNEF Tier 1, which facilitates bank financing and insurer acceptance for commercial-scale projects, even though the brand is not yet as widely recognized as Trina or JA Solar.

Low power temperature coefficient

The Pmax temperature coefficient of -0.3%/°C is more favorable than the typical -0.35 to -0.40%/°C found in PERC modules, translating to smaller power losses during summer heat and higher realized annual yield.

Trade-offs
Limited manufacturer track record

New East Solar Energy (Cambodia) is a relatively young player compared to long-established Tier-1 leaders like Trina Solar or JA Solar. Despite Tier-1 BNEF status, the shorter market history may give some investors pause for projects requiring a 25-30 year service horizon.

Large module footprint and weight

Dimensions of 2278x1134x30 mm and a weight of 31.5 kg classify this as a large-format module, which may require specialized mounting systems and limits versatility for smaller pitched roofs typical of residential/prosumer installations.

Notes from the database
  • Efficiency of 22.6% matches the TOPCon 550-600W median
  • At 226.5 W/m² power density, roof space requirements are typical for TOPCon 550-600W panels
  • Temperature coefficient of -0.30%/°C matches the TOPCon 550-600W median
  • Bifacial design (80% factor) captures reflected light - adds 4-12% yield on ground-mount or white roof
  • In the top 25% for efficiency among all TOPCon panels

Specifications

Open datasheet PDF
Nominal power (Pmax) 585 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 22.65 % Typical Segment median 22.44%
Vmpp · Impp 43.00 V · 13.62 A Operating point at max power
Voc · Isc 51.70 V · 14.41 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 2278×1134×30 mm · 2.58 m² of roof
Weight 31.5 kg Typical Typical · median 31.2 kg
Cells 144 · TOPCon Monocrystalline
Bifaciality 80 % Rear output as a share of front
Coefficient Pmax -0.300 %/°C Typical median -0.290 of its segment
Coefficient Voc · Isc -0.250 · 0.046 %/°C
NOCT 44 °C At 800 W/m², 20 °C ambient
Product warranty 12 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 87.4 % Equals 511 W guaranteed
Degradation 1.00 → 0.40 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by New East Solar in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 585 Wp appear here. The rest cover the whole series.

Linear Performance Warranty: Warranted Power Output vs. Years Linear Performance Warranty: Warranted Power Output vs. Years Whole series

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.300 %/°C against a segment median of -0.290
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Filter these
Size
Panel Power Eff. Temp. Weight Difference
New East Solar NESE 585-72THB-M10 585 W 22.65% -0.300 31.5 kg You are here
LR7-60HVH-560M 560 W 24.80% -0.260 25.0 kg Cooler, lighter, +2.2 pp
LR7-60HVH-555M 555 W 24.60% -0.260 25.0 kg Cooler, lighter, +2.0 pp
AIKO-A635-MAE72Mw 635 W 24.60% -0.260 27.0 kg +50 W, lighter, +2.0 pp
AIKO-A630-MAH72Dw 630 W 24.40% -0.260 32.5 kg +45 W, cooler, +1.8 pp
LR7-60HVHL-550M 550 W 24.40% -0.260 16.3 kg Cooler, 15 kg lighter, +1.8 pp
NESE 575-72THB-M10 575 W 22.26% -0.300 31.5 kg -10 W, -0.4 pp
NESE 580-72THB-M10 580 W 22.45% -0.300 31.5 kg Very close match
NESE 590-72THB-M10 590 W 22.84% -0.300 31.5 kg Very close match
NESE 595-72THB-M10 595 W 23.03% -0.300 31.5 kg +10 W, +0.4 pp
AIKO-A650-MAE72Mw 650 W 25.20% -0.260 27.0 kg +65 W, lighter, +2.6 pp
AIKO-A645-MAE72Mw 645 W 25.00% -0.260 27.0 kg +60 W, lighter, +2.4 pp
AIKO-A640-MAE72Mw 640 W 24.80% -0.260 27.0 kg +55 W, lighter, +2.2 pp

Found 2326 panels of the same or similar size to this one, within ±10 mm. See them here Found 2368 panels of the same or similar size to this one, within ±25 mm. See them here Found 2382 panels of the same or similar size to this one, within ±50 mm. See them here Found 2547 panels of the same or similar size to this one, within ±100 mm. See them here

Common questions

6 answered
What is the warranty on the New East Solar NESE 595-72THB-M10 panels?
The manufacturer provides a 12-year product warranty and a 30-year linear power output warranty. After 10 years the panel retains a minimum of 95.4% of rated power, and after 30 years at least 87.4%. This means a 595 Wp module will still deliver over 520 Wp three decades after installation, making it a solid long-term investment for utility-scale solar farms and large commercial rooftop systems.
What is TOPCon technology in the NESE 595-72THB-M10 and is it worth choosing?
TOPCon (Tunnel Oxide Passivated Contact) uses N-type silicon with a thin tunnel oxide layer that suppresses carrier recombination. The result is module efficiency of up to 23.03% and near-zero light-induced degradation (LID). In practice, this delivers higher energy yield across the full system lifetime compared to older PERC modules, making it a proven upgrade for investors focused on minimizing LCOE.
Does the bifacial design of the NESE 595-72THB-M10 actually produce more energy?
Yes, but the gain depends on ground albedo. On a ground-mount system with a light-colored geomembrane or sandy surface, albedo of 30–50% can add 5–15% to rear-side output. On a dark rooftop the effect is negligible. With proper racking clearance and a well-designed layout, bifacial gain meaningfully reduces the installation's LCOE and shortens the capital payback period.
How does the NESE 595-72THB-M10 handle high temperatures in summer?
The panel has a Pmax temperature coefficient of -0.30%/°C, which outperforms a typical PERC module at -0.35%/°C. At a cell temperature of 70°C, power losses are roughly 2–3 percentage points lower than with older technologies. This translates directly into higher energy yields on hot summer days and is especially relevant when calculating returns for large commercial installations in Central Europe.
What are the dimensions of the NESE 595-72THB-M10 and does it fit standard racking systems?
The module measures 2278 × 1134 × 30 mm and weighs 31.5 kg. This is the standard form factor for premium 72-cell panels and is compatible with most rail-based racking systems on the market. The 31.5 kg weight requires at least two installers for rooftop work. For ground-mount projects, this format should be factored into structural calculations and tracker or fixed-tilt racking selection.
Is the NESE 595-72THB-M10 compatible with standard string inverters available in Europe?
Yes. The module operates within voltage and current ranges compatible with MPPT inputs of major inverter brands including SMA, Fronius, Huawei, and SolarEdge. When designing a string, use the 595 Wp rating and verify the inverter's maximum DC input voltage. The manufacturer's datasheet provides all electrical parameters needed for accurate inverter sizing, string configuration, and BoS design.
Add to compare