Strong in heat, heavy for its output
The JS-PERC BIFACIAL series redefines performance standards in demanding energy projects, combining proven PERC cell architecture with advanced bifacial technology. Thanks to the active rear surface, these panels effectively absorb light reflected from the ground, allowing for additional energy generation without the need to increase the installation area. This is a key response to the problem of limited mounting space, especially for installations on bright surfaces or tracking systems. The half-cut cell technology used significantly reduces internal losses and minimizes the negative impact of partial shading on the stability of the system. These models are characterized by a reinforced construction that ensures high mechanical strength against extreme snow and wind loads, guaranteeing safe operation for decades. JS-PERC BIFACIAL is primarily dedicated to solar farms and large commercial installations, where the priority is to maximize return on investment. They are distinguished from the competition by an exceptionally high bifaciality factor and an excellent price-to-yield ratio, making them some of the most cost-effective bifacial modules on the market, effectively lowering the levelized cost of energy (LCOE).
Ranking
Signals from the data
Commercial, utility-scale and shaded-installations.
Weight-limited structures.
Top 13% of the PERC 500-550 W segment, against a median of -0.350.
Bottom 13% of the PERC 500-550 W segment, against a median of 53.0.
Peak efficiency of 21.29% (550 Wp variant) is on par with Goldi Solar GS10-B144-TF (21.3%), S-Energy SL65-72BGJ (21.3%), and virtually identical to IBC Solar 182M (21.28%). The JS-PERC BIFACIAL series matches benchmark products in the segment on power density.
The active rear surface delivers additional energy yield of 2–15% depending on ground albedo and tilt angle — reaching the upper range on high-albedo surfaces or single-axis trackers. Half-cut cell architecture reduces resistive losses and limits the impact of partial shading on the full string, which is critical for utility-scale farms with non-uniform surroundings.
The manufacturer provides a 30-year linear performance warranty — matching the industry standard of leading producers such as JA Solar and Trina Solar. For utility-scale projects with a 20–25-year CAPEX horizon, this is a key input for LCOE calculations and financial due diligence.
Availability of four variants (535, 540, 545, 550 Wp) allows precise string sizing to inverter MPPT input ranges without over- or under-sizing, directly optimizing BoS costs and system performance ratio.
JS Solar does not appear on the BloombergNEF bankable manufacturer list (Q1 2026). For non-recourse financed utility-scale projects, this is a real obstacle: lenders typically require Tier-1 status as a financing condition. Direct peer IBC Solar carries an established market reputation and certified bankability, which can be decisive during project due diligence.
PERC cell bifaciality factor is typically 70–75%, while N-type TOPCon modules reach 80–85%. Field studies (Sohn et al. 2025, Energy Science & Engineering) show TOPCon generates 5–8% higher annual energy yield than PERC at comparable STC power ratings. On high-albedo sites (light gravel, snow), this gap directly reduces project IRR versus next-generation modules.
The product warranty covers 15 years, whereas leading Tier-1 manufacturers (Trina, JinkoSolar, LONGi) standardly offer 25-year product warranties on comparable bifacial modules in this power class. The shorter coverage period increases O&M risk beyond year 15, particularly given the manufacturer's less established global service footprint.
- At 20.7% efficiency, this panel is on par with typical PERC 500-550W modules
- Power density of 207.1 W/m² matches the PERC 500-550W median
- Temperature coefficient of -0.34%/°C matches the PERC 500-550W median
- At 32.0 kg, this panel is 3.6 kg heavier than the PERC 500-550W median (28.4 kg) - more demanding for installation crews
- 70% bifaciality enables rear-side power generation, boosting yield by 4-10% on reflective surfaces
Specifications
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.
Alternatives
Found 2326 panels of the same or similar size to this one, within ±10 mm. See them here Found 2368 panels of the same or similar size to this one, within ±25 mm. See them here Found 2382 panels of the same or similar size to this one, within ±50 mm. See them here Found 2547 panels of the same or similar size to this one, within ±100 mm. See them here