Middle of its segment, heavy for its output
Jinko Solar Tiger Pro 72HC-BDVP bifacial modules represent the technological foundation for modern photovoltaic farms and demanding commercial projects. Their key differentiator is bifacial double glass technology, which enables additional energy generation from the rear of the module, which - combined with appropriate ground albedo - drastically shortens the return on investment period. The use of innovative cells in Multi-busbar architecture allows for more efficient current flow and higher resistance to mechanical damage, directly eliminating the problem of premature component wear. This series was designed to minimize LCOE, offering investors high power density while maintaining standard dimensions that facilitate installation. Thanks to the use of Half-Cut technology, the panels handle shading effects much better, distinguishing them from traditional solutions available on the market. The exceptional integrity of the glass-glass construction guarantees full safety in harsh environmental conditions, such as high humidity or salinity. By choosing the Tiger Pro 72HC-BDVP series, you gain the assurance of the system operating at peak performance for decades, making these modules an unrivaled solution for the large-scale sector.
Ranking
Signals from the data
Commercial, utility-scale and shaded-installations.
Weight-limited structures, roofs where every square metre has to count and tight roof space.
Bottom 1% of the PERC 500-550 W segment, against a median of 53.0. Ranked 13,178th in the whole database.
Bottom 7% of the PERC 500-550 W segment, against a median of 209.0. Ranked 11,758th in the whole database.
Bottom 7% of the PERC 500-550 W segment, against a median of 20.90%. Ranked 11,791st in the whole database.
The glass-glass bifacial design harvests energy from both sides of the module. With a typical ground albedo of 20-25% (grass, soil), rear-side gain adds 8-15% to annual yield, directly reducing LCOE in ground-mount utility-scale projects and shortening the payback period.
A 9-busbar half-cut cell layout reduces series resistance and improves partial-shading tolerance compared to conventional full-cell modules. Annual power degradation is rated at ≤0.45%, placing this series below the P-type PERC segment average.
Certified snow load of 5,400 Pa and wind load of 2,400 Pa exceed IEC baseline requirements (2,400/2,400 Pa). The dual-glass glass-glass construction eliminates backsheet cracking risk, qualifying the series for high-alpine, coastal, and heavy-snowfall deployments.
JinkoSolar has maintained continuous BNEF Tier-1 status since 2012 and ranks among the top-three PV module manufacturers by global shipment volume. Tier-1 bankability eliminates counterparty risk, facilitates project finance, and ensures enforceable warranty recourse.
JinkoSolar guarantees at least 84.95% of rated power output after 30 years with annual degradation ≤0.45%. Warranty terms are on par with direct peer comparables: JA Solar DEEP BLUE 3.0 (max 555 Wp, 21.5% efficiency) and ET Solar Elite PLUS (max 555 Wp, 21.4% efficiency).
The Tiger Pro 72HC-BDVP is no longer in active production at JinkoSolar (2021 release, confirmed discontinued). Procurement relies entirely on distributor stock, creating real supply chain risk for system expansions or panel replacements over the 30-year asset life.
P-type PERC cells exhibit higher LID and LeTID degradation rates than N-type TOPCon modules now widely available, including JinkoSolar's own Tiger Neo series (rated ≤0.40%/yr vs. ≤0.45%/yr here). The cumulative difference over 25 years reaches approximately 1.25 percentage points of rated power - a measurable energy loss in projects exceeding 1 MWp.
The 12-year workmanship warranty falls short of the 15-year product warranty now standard on newer premium series - JinkoSolar Tiger Neo, LONGi Hi-MO 6, and Canadian Solar TOPBiHiKu7 among them. For projects requiring senior debt financing or formal bankability assessments, the shorter warranty term may be a contractual obstacle.
- Efficiency of 20.4% is 0.5pp below the PERC 500-550W median (20.9%)
- 203.6 W/m² power density is 5.4 W/m² below PERC 500-550W median (209.0 W/m²) - requires larger installation area
- Temperature coefficient of -0.35%/°C matches the PERC 500-550W median
- At 34.3 kg (5.9 kg above PERC 500-550W median of 28.4 kg), requires checking roof load capacity
- Bifaciality factor of 70% can add 4-10% extra yield with reflective mounting surface
Specifications
Datasheet charts
Measured curves published by Jinko Solar in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 525 Wp appear here. The rest cover the whole series.
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.
Found 2338 panels of the same or similar size to this one, within ±10 mm. See them here Found 2369 panels of the same or similar size to this one, within ±25 mm. See them here Found 2383 panels of the same or similar size to this one, within ±50 mm. See them here Found 2541 panels of the same or similar size to this one, within ±100 mm. See them here
About the Tiger Pro 72HC-BDVP series
These answers cover the whole series. Where a figure differs, the specification above is this module's own.