Skip to main content
JA Solar JAM72D40-615/LB

JAM72D40-615/LB

615 Wp TOPCon Bifacial 80%
ComparePV verdict

Space saver, no clear weak spot

Rank 2,486 of 14,005
Compare panels Datasheet PDF
Power (Wp)
615
Typical for its class
Efficiency (%)
23.20
Strong · top 23%
Density (Wp/m²)
232.5
Strong · top 19%
Temp (%/°C)
-0.290
Typical · median -0.290
Weight (kg)
32.5
Typical · median 32.7 kg
Warranty (yrs)
30
Typical · median 30 yrs

The JA Solar JAM72D40 LB series is designed to maximize yield in projects where every square meter counts, and predictable energy production is key. The use of N-type TOPCon cells helps minimize typical losses seen in older technologies and maintains stable module performance over the long term. The double-glass construction enhances environmental resistance, valued by investors prioritizing longevity and lower service risks. A key advantage is bifacial capability-the module can harvest energy from both sides, effectively boosting yield on bright rooftops, ground-mounted structures, or farms with appropriately oriented module surfaces. Thanks to half-cut cells and a multi-busbar configuration, the series performs better with microcracking and electrical loads, simplifying string design. This is the choice for PV farms, large industrial rooftops, and installations where LCOE, reliability, and consistent quality are top priorities.

Ranking

1,086 panels in the segment TOPCon 600-650 W
Metric This panel Median Position in segment Overall rank
Module efficiency 23.20% 22.80% Strong · top 23% 1,306
Power density 232.5 227.7 Strong · top 19% 1,249
Temperature coefficient -0.290 -0.290 Typical 2,165
Weight per kWp 52.8 53.1 Typical 6,546
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

7 positive · 2 caution
Best for

Utility-scale, commercial and shaded-installations.

Strengths
232.5 watts per square metre

Top 19% of the TOPCon 600-650 W segment, against a median of 227.7.

23.20% module efficiency

Top 23% of the TOPCon 600-650 W segment, against a median of 22.80%.

What owners get
Premium efficiency: up to 23.2%

The top variant delivers 23.2% module efficiency, outperforming direct comparables: GCL-M12/60H (21.7%), Risen TITAN (21.7%), and LONGi Hi-MO X6 Explorer (22.8%). The 0.4–1.5 pp advantage translates into meaningfully higher energy yield per unit of roof or ground area.

N-type TOPCon: no LID, low degradation

N-type TOPCon cells eliminate the LID (Light Induced Degradation) effect common in P-type PERC. Annual degradation is approximately 0.4%/year (after ~1% first-year loss) vs. 0.5–0.55%/year for PERC, resulting in approximately 87% retained nameplate power after 30 years — consistent with JA Solar's linear power warranty.

Bifacial gain with double-glass construction

Bifaciality factor reaches ~80% (±5%), delivering an additional 5–15% energy yield on ground-mount and light-colored rooftop installations compared to monofacial modules. The dual-glass laminate eliminates the backsheet as a failure point and improves resistance to moisture ingress, PID, and UV degradation.

30-year linear power warranty

JA Solar guarantees linear power degradation not exceeding ~0.55%/year over 30 years — a bankability-grade commitment critical for LCOE modeling and non-recourse project finance underwriting. The product (workmanship) warranty period is 12 years.

JA Solar – BNEF Tier-1, #1 Wood Mackenzie H1 2025

JA Solar holds BNEF Tier-1 bankable status and ranked #1 in the Wood Mackenzie Global Solar Module Manufacturer ranking for H1 2025 (score: 91.7/100) with annual output exceeding 80 GW. Manufacturer bankability reduces project finance risk and supports non-recourse debt financing for utility-scale PV farms.

Trade-offs
Module weight: ~31.8 kg

The dual-glass construction weighs approximately 31.8 kg (2,333 × 1,134 × 30 mm), roughly 4–5 kg heavier than comparable single-glass modules at this power class. On industrial rooftops with structural load capacity below 15 kg/m², an engineering review is required before specifying this series.

Product warranty: 12 years (market standard)

The workmanship and materials warranty is 12 years — in line with the segment average, but below LONGi Solar's 15-year coverage on the Hi-MO X6 Explorer. For investors prioritizing execution risk mitigation over a 15–20-year horizon, this gap may serve as a valid negotiation point.

Notes from the database
  • Efficiency of 23.2% matches the TOPCon 600-650W median
  • Power density of 232.5 W/m² packs 4.8 W/m² more into the same footprint vs TOPCon 600-650W median (227.7 W/m²)
  • Temperature coefficient of -0.29%/°C matches the TOPCon 600-650W median
  • Bifaciality factor of 80% can add 4-12% extra yield with reflective mounting surface
  • Ranked #1306 out of 14005 panels for efficiency in the database

Specifications

Open datasheet PDF
Nominal power (Pmax) 615 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 23.20 % Strong Segment median 22.80%
Vmpp · Impp 44.28 V · 13.89 A Operating point at max power
Voc · Isc 53.00 V · 14.61 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 2333×1134×30 mm · 2.65 m² of roof
Weight 32.5 kg Typical Typical · median 32.7 kg
Cells 144 · TOPCon Monocrystalline
Bifaciality 80 % Rear output as a share of front
Coefficient Pmax -0.290 %/°C Typical median -0.290 of its segment
Coefficient Voc · Isc -0.250 · 0.045 %/°C
NOCT 45 °C At 800 W/m², 20 °C ambient
Product warranty 12 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 87.4 % Equals 538 W guaranteed
Degradation 1.00 → 0.40 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by JA Solar in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 615 Wp appear here. The rest cover the whole series.

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.290 %/°C against a segment median of -0.290
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Filter these
Size
Panel Power Eff. Temp. Weight Difference
JA Solar JAM72D40-615/LB 615 W 23.20% -0.290 32.5 kg You are here
AIKO-A650-MAE72Mw 650 W 25.20% -0.260 27.0 kg +35 W, lighter, +2.0 pp
AIKO-A645-MAE72Mw 645 W 25.00% -0.260 27.0 kg +30 W, lighter, +1.8 pp
AIKO-A640-MAE72Mw 640 W 24.80% -0.260 27.0 kg Cooler, lighter, +1.6 pp
LR8-66HVD-665M 665 W 24.62% -0.260 33.5 kg +50 W, cooler, +1.4 pp
JKM650-670N-66QL6-BDV (665W class) 665 W 24.62% -0.260 32.5 kg +50 W, cooler, +1.4 pp
HY665-B144DSS 665 W 24.62% -0.260 27.6 kg +50 W, lighter, +1.4 pp
SPDG665-BC132R12 665 W 24.62% -0.260 33.5 kg +50 W, cooler, +1.4 pp
JAM72D30-555/LB/1500V 555 W 21.00% -0.350 32.5 kg -60 W, hotter, -2.2 pp
JAM72D30-560/LB/1500V 560 W 21.20% -0.350 32.5 kg -55 W, hotter, -2.0 pp
JAM72D30-565/LB/1500V 565 W 21.40% -0.350 32.5 kg -50 W, hotter, -1.8 pp
JAM72D30-570/LB/1500V 570 W 21.50% -0.350 32.5 kg -45 W, hotter, -1.7 pp
JAM72D30-575/LB/1500V 575 W 21.70% -0.350 32.5 kg -40 W, hotter, -1.5 pp
JAM72D30-580/LB/1500V 580 W 21.90% -0.350 32.5 kg -35 W, hotter, -1.3 pp
AIKO-A680-MDE72Mw 680 W 25.20% -0.260 29.0 kg +65 W, lighter, +2.0 pp
AIKO-A675-MDE72Mw 675 W 25.00% -0.260 29.0 kg +60 W, lighter, +1.8 pp
AIKO-G670-MCH72Mw 670 W 24.80% -0.260 28.2 kg +55 W, lighter, +1.6 pp

Found 44 panels of the same or similar size to this one, within ±10 mm. See them here Found 48 panels of the same or similar size to this one, within ±25 mm. See them here Found 1186 panels of the same or similar size to this one, within ±50 mm. See them here Found 3657 panels of the same or similar size to this one, within ±100 mm. See them here

Common questions

6 answered
How does the bifacial design of the JA Solar JAM72D40 LB actually improve energy yield?
The bifacial N-type TOPCon cells in the JAM72D40 LB series capture sunlight from both the front and rear of the module. On reflective surfaces — white roofing membranes, gravel, concrete, or snow-covered ground — the additional rear-side gain can add several to over ten percent compared to a monofacial module. The benefit is greatest in ground-mounted systems with elevated racking and a light-colored surface beneath the panels.
What warranties does JA Solar offer for the JAM72D40 LB series, and what do they cover?
JA Solar provides a 12-year product warranty covering material and workmanship defects, and a 30-year linear power output warranty. Degradation is capped at 1% in year one and 0.4% per year thereafter, meaning the module retains at least 87.4% of its rated power after 30 years. This is one of the longer performance guarantees available in the commercial module segment.
How does the TOPCon technology in the JAM72D40 LB compare to standard PERC modules, and is it worth the price difference?
TOPCon cells feature a thin passivation layer that reduces electron recombination losses. In practical terms, this delivers higher module efficiency (approximately 22.3–23%), a lower temperature coefficient, and slower long-term degradation — around 0.4%/year versus roughly 0.55%/year for older PERC modules. Over a 25–30-year project lifetime, the cumulative energy output difference is meaningful, particularly in large commercial or utility-scale installations.
Are the JAM72D40 LB modules suitable for large industrial rooftops or warehouse installations?
Yes, the JAM72D40 LB series is specifically designed for commercial and industrial applications. At approximately 2333×1134 mm and up to 615 Wp per module, it allows high-power systems to be built with fewer modules and a faster installation schedule. The mechanical ratings — 5400 Pa snow load and 2400 Pa wind load — fully meet structural requirements for typical European climatic conditions.
What advantage do the half-cut cells and multi-busbar layout provide in the JAM72D40 LB?
Half-cut cells split the current path into two independent sub-circuits, so partial shading on one half of the module does not shut down the other half's output. The multi-busbar layout shortens the current path across each cell, reducing resistive losses and improving resilience against microcracks. Together, these features increase energy yield under partial shading conditions and simplify string design for sites with variable irradiance.
How heavy is the JAM72D40 LB module, and does it require a special mounting structure?
Each JAM72D40 LB module weighs approximately 31.8 kg — noticeably more than a typical residential panel. For rooftop installations, it is important to verify structural load capacity and use mounting hardware rated for large-format modules (2333×1134 mm). For ground-mounted arrays, the weight is not a limiting factor; standard steel racking used in utility-scale PV farms is fully compatible.
Add to compare