Efficiency leader, no clear weak spot
This series was designed with every square centimeter of roof space and real ease of installation in mind. It’s a compact, double-glass module that’s easier to handle, placing, and installing on pitched roof ridges and in hard-to-reach spots - without compromising on cutting-edge cell technology. The use of N-type TOPCon cells helps limit losses and maintain high operational stability over time, which is especially important in residential installations where even small drops in yield quickly translate to higher bills.
In practice, this series addresses two common problems: limited mounting space and the risk of accelerated module aging in challenging conditions. Thanks to its glass-glass construction and TOPCon technology, the panels perform well on residential rooftops, carports, and smaller commercial structures. An additional advantage is bifacial capability, allowing for the use of reflected light when mounting conditions permit. It stands out from the competition due to its installer-friendly format and focus on practical ergonomic design.
Ranking
Price offers
| Shop | Country | Price | Per kWp | Stock | Offer updated | Link to shop |
|---|---|---|---|---|---|---|
| www.photovoltaik-shop.com | Germany | 73 € incl. VAT | 280.77 €/kWp | In stock | 21h ago | Visit shop |
| solarvic.at | Austria | 82.50 € net | 317.31 €/kWp | In stock | 21h ago | Visit shop |
Signals from the data
Residential and commercial.
Top 12% of the TOPCon 250-300 W segment, against a median of 14.99%.
Top 12% of the TOPCon 250-300 W segment, against a median of 149.9.
Top 12% of the TOPCon 250-300 W segment, against a median of 79.5.
A peak efficiency of 22.9% clearly outperforms direct peer comparables: Kyocera KK270P (16.4%) and KU-60 (16.41%) are approximately 39% less area-efficient, while the MY Solar M2 series reaches 21.2%. In practice, this translates to roughly 10–15% more power from the same roof area compared to the best-performing alternative.
Per the manufacturer's datasheet, only 0.4% annual power degradation is guaranteed over 30 years, corresponding to ≥88% of rated power output retained at end of warranty. N-type technology eliminates the LID (Light-Induced Degradation) effect characteristic of older P-type PERC cells, delivering tangible operational benefits especially during the early years of system operation.
A linear power warranty extending to 30 years is an above-market commitment — the industry norm among Tier 2/3 manufacturers is 25 years. Combined with a 25-year product warranty and a bankability rating of 'A' (PV ModuleTech Q4 2024), the financial risk of a prosumer investment is significantly reduced.
A weight of just 15.3 kg and a form factor of 1542×766×30 mm are exceptional among glass-glass modules, which typically weigh 20–25 kg. On steep roof pitches and hard-to-access installations, this means safer handling for the installer and reduced mounting time — a meaningful competitive advantage for installation crews.
DMEGC maintains Tier 1 BloombergNEF status (confirmed Q3 2025) and an 'A' rating from S&P Global Tier 1 Cleantech. In the Wood Mackenzie 2025 ranking, the manufacturer advanced to 5th place globally with shipments of 13.4 GW in H1 2025 alone (+64% YoY), materially reducing supplier insolvency risk over the warranty horizon.
Against the 2024–2025 market standard of 400–450 Wp for full-size M10/G12 modules, achieving a 10 kWp system requires a minimum of 37 panels from this series versus approximately 23 standard modules. For systems above ~6 kWp, this proportionally increases BoS costs (rails, mounting hardware, MC4 connectors, labor), which can offset any potential module-level price advantage.
- Efficiency of 22.0% is 6.0pp above the TOPCon 0-400W median (16.0%)
- 220.1 W/m² power density - 60.3 W/m² more than TOPCon 0-400W median (159.8 W/m²), more power per roof area
- At -0.29%/°C, hot weather performance is typical for TOPCon 0-400W panels
- Weight of 15.3 kg (8.2 kg below TOPCon 0-400W median of 23.5 kg) allows easier transport and roof mounting
- 80% bifaciality enables rear-side power generation, boosting yield by 4-12% on reflective surfaces
Specifications
Datasheet charts
Measured curves published by DMEGC in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 260 Wp appear here. The rest cover the whole series.
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.
Found 8 panels of the same or similar size to this one, within ±10 mm. See them here Found 20 panels of the same or similar size to this one, within ±25 mm. See them here Found 40 panels of the same or similar size to this one, within ±50 mm. See them here Found 149 panels of the same or similar size to this one, within ±100 mm. See them here